1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2001 4 runner alignment

Discussion in '3rd Gen 4Runners (1996-2002)' started by Jk68, Feb 10, 2023.

  1. Feb 10, 2023 at 7:26 PM
    #1
    Jk68

    Jk68 [OP] New Member

    Joined:
    Feb 10, 2023
    Member:
    #31189
    Messages:
    5
    Gender:
    Male
    I have a 2001 4 runner 4 wheel drive,I had a front end alignment done and everything is in the green except the cross caster ,it's -0.8 in the red ,the range is -0.5 to 0.5, there is a slight pull to the right.The shop that did it says it's good,my question is what's the cross camber and what could make off specs
     
  2. Feb 12, 2023 at 3:52 PM
    #2
    chadskitt

    chadskitt New Member

    Joined:
    Aug 7, 2021
    Member:
    #22726
    Messages:
    9
    Gender:
    Male
    Vehicle:
    2001 4Runner Limited
    Mine has similar castor specs and can't be adjusted because the lower control arm bushings are siezed and need replaced.
     
  3. Feb 12, 2023 at 5:36 PM
    #3
    Jk68

    Jk68 [OP] New Member

    Joined:
    Feb 10, 2023
    Member:
    #31189
    Messages:
    5
    Gender:
    Male
    Are the bushings pressed in,I know most are I really don't want to buy the control arm
     

Products Discussed in

To Top