1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Additional drink holders - no tools needed

Discussion in '5th Gen 4Runners (2010-2024)' started by Badger4runner72, Sep 16, 2022.

  1. Sep 16, 2022 at 11:01 AM
    #1
    Badger4runner72

    Badger4runner72 [OP] New Member

    Joined:
    Sep 16, 2022
    Member:
    #28658
    Messages:
    3
    Vehicle:
    2022 Barcelona Red ORP
    I came across this in Tacoma World where user samjpatt used some climbing chalk bags as additional drink holders. See here: https://www.tacomaworld.com/threads/tool-less-32oz-cupholder-mod.672736/

    The specific chalk bags are made by a lovely small company called Static Climbing Co. Taylor (taylor@staticclimbing.com) is the owner and she has worked with the Tacoma community to develop some custom options for drinks and our use. My personal experience was extremely pleasant with great customer service, high quality and hand made bags. If you want the mods make sure you email her first.

    The mods I chose were thinner loops, nylon liner, small brush loop, standard size and mirrored.

    Here is the mod list below for the cupholders:
    MODS....

    2 single thinner loops (100% mod people choose)

    swap out the fleece for a nylon liner (the most popular mod other than the thin loops)

    smaller brush loop / or / no brush loop at all (the side loop that is sized down slightly to fit a sharpie or pen)

    standard size (fits a 32/40oz Hydroflask) / or / smaller size (fits a normal water bottle) / or / XL (fits a 64oz hydroflask)

    Standard / or / mirrored (If ordering 2) (have the pen loop face the same side so they mirror when installed)

    Patch on the front(normal) / or / the back or leave it off the bag (only applies to bags with patches on them)

    Remove the drawstring and grommet / or / keep the grommet and drawstring

    They really do not get in the way, although it's possible depending on the cup/bottle could slightly tough your leg depending on how you drive and your calf size.

    Love the look and utility... Installation is super easy. Just pull up the trim straight up in the back right, then back left and then the front. I used a 5/16" wooden dowel with multiple wraps of electrical tape so the loops wouldn't slide off. Just rest the dowel in there and press the trim back down. Trim doesn't bulge at all and there is a natural spot for them on both sides.

    h2.jpg h3.jpg h4.jpg h1.jpg
     
    H2o-bar, jmkulbeth and MeefZah like this.
  2. Sep 16, 2022 at 1:02 PM
    #2
    MeefZah

    MeefZah ------------

    Joined:
    Nov 1, 2015
    Member:
    #1122
    Messages:
    2,809
    Gender:
    Male
    First Name:
    Mark
    Lexington, Ohio
    Vehicle:
    2020 GX4(Runner)60
    I also found that post on TW and also used it for inspiration. I hung mine over the seat back though, as I didn't want to occlude front leg area.

    Handy for larger bottles for sure.

    Also a backseat passenger booger repository.

    PXL_20220916_200039164.jpg
     
  3. Jul 26, 2023 at 1:26 PM
    #3
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,762
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    I know this is a older post but wife likes this bag for her drink. I figured someone had these in there 4runner. Badge4runner 72 thanks for the info. I will be moving mine out of my tundra into my new 4runner.
     

Products Discussed in

To Top