Front Wheel well splash guards or covers?

I have a 2016 Limited Edition and it's Pearl White, which means the black bolts in the wheel well are extremely obvious under the panel behind the tires. I've search a bit and can't seem to find a cover or splash guard that goes all the way up to the last bolt to cover? Is there such a product?
Also, it should be mentioned that I have fixed step rails.

 

TAKE a picture ..

 

Here are a couple pics

 

little shot of white plasti dip? or get some touch up paint from the dealer?

 

Limited models don't have mud flaps? As @jester243 color match touch up paint might be your best bet.

 

or you could just paint the inner part of the flare black, i imagine it'll get dinged up anyway

 

I don't think they do, my dad was trying to find some and for his limited there were no options. However, he has the retracting running boards so if you don't have those I would imagine you could put the factory ones on.

 

I would never run with no mud guards my sr5 came with mud guards front rear. I however did not like the fronts TOO SHORT .. So I installed aftermarket fiber glass re-enforced guards. used all those OEM fasteners to lock it in place .. 10X more durable than toyota part.

I used a piece of card board made a copy of the hole locations then put holes in the cardboard then mounted on vehicle did some tweaking .. then placed on after market guard drilled the holes and mounted it .. so far working great NO crap on the sides or the side step..

cost for the guards was $25..