1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Aug 22, 2022 at 12:06 PM
    hossler1788

    hossler1788 Turtle

    Joined:
    Dec 17, 2020
    Member:
    #18578
    Messages:
    2,199
    Gender:
    Male
    First Name:
    Joshua
    Central Pa
    Vehicle:
    2020 4runner
    Yes it helps. But don't go off buying a trd exhaust just because the side exit. Just find a good muffler shop to bend the tailpipe.
     
    Stoney Ranger likes this.
  2. Aug 22, 2022 at 12:13 PM
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    3,277
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    I honestly didn't notice it before but that's one of the main reasons I went with it. Probably a ton cheaper to have a bent pipe made like mentioned.
     
  3. Aug 22, 2022 at 3:53 PM
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,824
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Even as a vehicle used off road, it would probably be not be many that would taken it through water deep enough to to submerge the breather. It’s located a few inches above the hub, which is the same level as the bottom of the opening of the doors.

    That said, it’s reasonable insurance…
     
    toy33 likes this.
  4. Aug 22, 2022 at 4:57 PM
    CJT4Runner

    CJT4Runner Frosty

    Joined:
    Jan 11, 2020
    Member:
    #12672
    Messages:
    331
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    ‘20 TRD ORP
    Meso door handles installed.
     
  5. Aug 22, 2022 at 6:19 PM
    DadOperator

    DadOperator New Member

    Joined:
    Jul 30, 2022
    Member:
    #28011
    Messages:
    160
    Gender:
    Male
    Vehicle:
    22 Trail Special Edition
    It is in my list of considerations.

    Our first trip was this weekend and it did ok. Drove on highway at 60-65mph. Trucks and stuff definitely push this box around. It is comfortable enough for sure but if it was really windy or stormy I’d probably wait it out.

    C069CE13-3C60-4053-99A7-1C8260C7E5CA.jpg
     
    ESCT4R, Rich60, MyWyfsRnnr and 5 others like this.
  6. Aug 22, 2022 at 6:51 PM
    hossler1788

    hossler1788 Turtle

    Joined:
    Dec 17, 2020
    Member:
    #18578
    Messages:
    2,199
    Gender:
    Male
    First Name:
    Joshua
    Central Pa
    Vehicle:
    2020 4runner
    Do you have any modifications for towing?( hd rear springs or ?)
     
  7. Aug 22, 2022 at 7:25 PM
    DadOperator

    DadOperator New Member

    Joined:
    Jul 30, 2022
    Member:
    #28011
    Messages:
    160
    Gender:
    Male
    Vehicle:
    22 Trail Special Edition
    Nothing yet except a trailer brake controller. Going to install an in-line trans oil cooler. Not sure on suspension yet, still debating.
     
    qcTRDct likes this.
  8. Aug 22, 2022 at 7:33 PM
    KA1OTE

    KA1OTE Just a KA1OTE drivin' a 4Runner

    Joined:
    Aug 16, 2022
    Member:
    #28236
    Messages:
    26
    Gender:
    Female
    First Name:
    Kai
    Southern Wyoming
    Vehicle:
    2021 NBM Venture SE
    Installed the Tacoma Start Ring from AJT. They say it won't fit 4Runners due to the back tabs being arranged slightly different between the two vehicles, but it snapped right into my dash no problem. And it looks fantastic with the TRD start button by Meso I was able to hunt down! And they both blend very well with my radio and climate control knobs (AJT again).

    Also installed the upper control panel carbon fiber surround (no idea what its official name is LOL!) and scored my first patch from 4Runner Lifestyle in my order for their LED license plate lights.

    I'm thinking I want to add a few more carbon fiber pieces but my "cockpit" is already beginning to look the way I envision it!

    20220815_175331.jpg
    20220815_175305.jpg
    20220815_180032.jpg
     
    Dabigono likes this.
  9. Aug 22, 2022 at 8:23 PM
    Potsie

    Potsie New Member

    Joined:
    Jan 30, 2022
    Member:
    #25412
    Messages:
    243
    Gender:
    Male
    Vehicle:
    2022 Army Green 4Runner ORP
    Changed out my red ajt climate knobs for the army green climate knobs since they just released them. Also added a little cubby off of etsy making that useless storage area below the infotainement useful. If anyone is interested in red climate knobs and black radio knobs pm me and we can work out a reasonable discounted price. 20220817_195426.jpg 20220817_201534.jpg
     
    Last edited: Aug 22, 2022
    Dabigono and White Walker like this.
  10. Aug 23, 2022 at 3:14 AM
    replica9000

    replica9000 New Member

    Joined:
    Sep 7, 2019
    Member:
    #11179
    Messages:
    593
    First Name:
    Jason
    New Vertiform City
    Vehicle:
    2019 TRD OR Premium
    Dobinsons 2.5" lift. Cooper AT3 XLT 295/70R17.
    I used the get the exhaust smell on my Tacoma when it was newer, same with the 4Runner. Seems to go away when it's broken in.

    I stopped driving with the rear window down, at least on the highway. My headliner in the cargo area is dirty from stuff being sucked in through the window. I also noticed that the air flowing through the cab will become warmer with the rear window down. Not sure if it's the exhaust being sucked in, or because the airflow changes when the rear window is open.
     
  11. Aug 23, 2022 at 7:24 AM
    K-Paul

    K-Paul Looking for a water crossing

    Joined:
    Sep 7, 2021
    Member:
    #23237
    Messages:
    1,058
    Gender:
    Male
    First Name:
    Corbin Dallas
    Vehicle:
    SR5 4WD
    Agreed, I would say its mandatory. For $72 it should be the absolute first mod people do.
     
  12. Aug 23, 2022 at 7:26 AM
    K-Paul

    K-Paul Looking for a water crossing

    Joined:
    Sep 7, 2021
    Member:
    #23237
    Messages:
    1,058
    Gender:
    Male
    First Name:
    Corbin Dallas
    Vehicle:
    SR5 4WD
    $72 prevents $2,000 in repairs, or add another 1 to 2K if you got to replace the whole doff and cant find a new one.
     
  13. Aug 23, 2022 at 8:15 AM
    5six

    5six New Member

    Joined:
    Mar 22, 2022
    Member:
    #26248
    Messages:
    587
    Gender:
    Male
    First Name:
    55_4Runner
    GTA, Ontario, Canada
    Vehicle:
    2022 Black TRD ORP
    Ceramic tint (all glass), Toyo AT3s 285/70 C load, Eibach Pro Truck Stage 2 suspension, Ironman UCA, Cartrimhome TRD skid plate, RCI skids (rear diff, transmission, filler plate, catalytic anti theft), SwitchPro 9100 & MT Plate, Caliraised ditch lights & brackets, Caliraised molle panels, Sherpa roof rack, Westcott ladder, Weathertech window visors, Meso & LED interior bulbs, black badging, Weathertech mats, Husky cargo liner, Canvasback rear seat backing, Smittybilt 2781, Morrflate Quad, ARB Diff Breather, Ultimate9, TRD Pro rims, GTR Carbide headlights, DIY Knight Rider light strip.
    Great to know, I ad no idea. I just ordered the ARB kit.
     
  14. Aug 23, 2022 at 12:52 PM
    Tmiesowicz

    Tmiesowicz New Member

    Joined:
    Dec 30, 2021
    Member:
    #24881
    Messages:
    1,241
    Gender:
    Male
    The better half of New York
    Vehicle:
    2022 sr5 premium 4x4 (sold) 2022 ram classic tradesman 5.7L 4x4 (current)
    Put some new shoes on the new runner today, so far smooth as silk. Out with the shitty dunlops in with the ko2’s.

    5F89136D-89F2-43E2-95C4-1B4C29CCAFD7.jpg
    1061A7F2-7118-4DB7-B1A5-DDB7F96AB051.jpg
     
  15. Aug 23, 2022 at 3:50 PM
    bigmario73

    bigmario73 New Member

    Joined:
    Jul 24, 2022
    Member:
    #27930
    Messages:
    14
    Gender:
    Male
    First Name:
    Mario
    Cary, IL
    Vehicle:
    2021 Silver Venture
    RCI Skids, RSG Sliders, KO2s
    Installed RSG slider



     
  16. Aug 23, 2022 at 3:58 PM
    travelinscout

    travelinscout New Member

    Joined:
    Feb 18, 2020
    Member:
    #13203
    Messages:
    628
    Gender:
    Male
    Arizona
    Vehicle:
    2020 TRD ORP MGM
    Today I finally wrapped up a project that has been in the works since I bought my truck over 2 years ago! I finally installed my lift and got new tires to match.

    I couldn't be happier with the look and the ride!

    Here are my specs: Front Bilstein 6112 coilovers set at the highest setting (2.6) for a non-KDSS 2020 TRD ORP
    Rear: Bilstein 5160 reservoir shocks, with Bilstein 1.5/2" springs.
    SPC UCA
    Mickey Thompson Baja Boss A/T 285-70-17

    I have no rubbing at all, and have not had to perform any of the popular mods associated with larger tires. BMC, Mud Flap trim, or viper cut. The tires feel awesome, but so far have only transported me from DT back to my house.

    I was able maintain the slight rake that came from the factory, which should make me level when I add some gear in the back.


    Front 3.4 new tires 2022.jpg front 3.4 pic 2 new tires 2022.jpg side new tires 2022.jpg side new tires pic 2 2022.jpg
     
  17. Aug 23, 2022 at 4:02 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,206
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Not today but Sunday went shooting and needed it to access my buddy's property. W/out chewing up terrain IF the wife's( She's wearing Camo Top & my bride is a TOTAL Gotta look good! BUT then will get down & dirty woman!?!? I don't get it??( ILX could've made it??? Never would've tried taking her's up the small hill climb:bananadance: Plus it's surrounded by corn fields now. You can see the 4Runner past my buddy's Co-Part Cherokee! He's got $$ but likes to tinker cause he's got time & $$$. Great time !!!!!

    IMG_1663.jpg
    IMG_1665.jpg
     
  18. Aug 23, 2022 at 5:49 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,019
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Nice truck! Love Mickey Thompsons. No rubbing at all even in reverse eh?
    I have similar setup with Bilstein's but 3" lift, and had to trim fender and remove front flaps. 17 inch M/T rims, offset 0
     
    travelinscout[QUOTED] likes this.
  19. Aug 23, 2022 at 5:52 PM
    travelinscout

    travelinscout New Member

    Joined:
    Feb 18, 2020
    Member:
    #13203
    Messages:
    628
    Gender:
    Male
    Arizona
    Vehicle:
    2020 TRD ORP MGM
    Thanks! I actually tried to make it rub, forward and in reverse. I am running the ever popular TRD wheels. Can't wait to get these tires out in the wild!
     
  20. Aug 23, 2022 at 6:05 PM
    PVT Pablo

    PVT Pablo

    Joined:
    Mar 10, 2016
    Member:
    #1694
    Messages:
    2,387
    First Name:
    Paul
    Kitsap County, WA
    Vehicle:
    2016 4Runner TRD Pro
    Wife got the 4Runner detailed. Hasn't been this clean since new!

    20220823_180137.jpg
     
  21. Aug 23, 2022 at 7:01 PM
    replica9000

    replica9000 New Member

    Joined:
    Sep 7, 2019
    Member:
    #11179
    Messages:
    593
    First Name:
    Jason
    New Vertiform City
    Vehicle:
    2019 TRD OR Premium
    Dobinsons 2.5" lift. Cooper AT3 XLT 295/70R17.
    Time to play the lottery?
    IMG_20220822_202217.jpg
     
    toy33, playdixie, kmeeg and 8 others like this.
  22. Aug 24, 2022 at 11:57 AM
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,824
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Looks great! Hope to see them in action soon! :mudding:
     
  23. Aug 24, 2022 at 1:41 PM
    5six

    5six New Member

    Joined:
    Mar 22, 2022
    Member:
    #26248
    Messages:
    587
    Gender:
    Male
    First Name:
    55_4Runner
    GTA, Ontario, Canada
    Vehicle:
    2022 Black TRD ORP
    Ceramic tint (all glass), Toyo AT3s 285/70 C load, Eibach Pro Truck Stage 2 suspension, Ironman UCA, Cartrimhome TRD skid plate, RCI skids (rear diff, transmission, filler plate, catalytic anti theft), SwitchPro 9100 & MT Plate, Caliraised ditch lights & brackets, Caliraised molle panels, Sherpa roof rack, Westcott ladder, Weathertech window visors, Meso & LED interior bulbs, black badging, Weathertech mats, Husky cargo liner, Canvasback rear seat backing, Smittybilt 2781, Morrflate Quad, ARB Diff Breather, Ultimate9, TRD Pro rims, GTR Carbide headlights, DIY Knight Rider light strip.
    I’m dumb / unaware … I saw somewhere a few mins ago that I should be able to remotely start my 2022 version of it, so I tried it and it worked. Not sure why I hadn’t come across it before. When I picked my vehicle up focus was on the paperwork, and then I was out the door and on the road.
    :bananadance:
     
    Vito Corleone likes this.
  24. Aug 24, 2022 at 4:55 PM
    Slimwood Shady

    Slimwood Shady New Member

    Joined:
    Oct 3, 2021
    Member:
    #23641
    Messages:
    89
    Gender:
    Male
    First Name:
    Linwood
    San Antonio, TX
    Vehicle:
    ‘22 T4R Pro Lime Rush, 996TT
  25. Aug 24, 2022 at 8:13 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,019
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    AnyDecals.com lived up to their name highly recommend

    IMG_20220824_200658.jpg
     
  26. Aug 24, 2022 at 9:00 PM
    afret

    afret 2022 ORP, KDSS, Toyo AT3

    Joined:
    Oct 19, 2021
    Member:
    #23882
    Messages:
    496
    Gender:
    Male
    North Idaho
    Stuck on a Dashcam.

    [​IMG]
     
    MAXIM, MyWyfsRnnr and Dabigono like this.
  27. Aug 24, 2022 at 9:38 PM
    qcTRDct

    qcTRDct New Member

    Joined:
    Mar 9, 2022
    Member:
    #26029
    Messages:
    469
    Gender:
    Male
    Vehicle:
    2022 ORP KDSS
    CONCERNING THE REAR DIFF SCUBA MOD.

    Guys this has been a popular mod on FJ's for years. You can do it for 10 bucks DIY. There is a threaded nipple you can buy right from Toyota that screws into the diff where your breather was. Then you run 1/4" fuel line wherever you want, and hose clamp the original breather into the far end of the hose to prevent insects and debris getting in. I will find the part number tomorrow and try to do a quick write up for the forum.

    Not sure if front diff and T case are vented up near the fuse block in the engine block like they are in the FJ. If not there is a similar work around for that.
     
  28. Aug 25, 2022 at 12:10 PM
    qcTRDct

    qcTRDct New Member

    Joined:
    Mar 9, 2022
    Member:
    #26029
    Messages:
    469
    Gender:
    Male
    Vehicle:
    2022 ORP KDSS
    And for those that just can't wait, the part number that works on the 2007 FJ is this:

    https://www.toyotapartsdeal.com/oem/toyota~union~no~4~90404-51026.html

    i happen to have one, and will verify fitment in my 22 4runner when I get it in a couple weeks.
     
  29. Aug 25, 2022 at 2:21 PM
    Beachgoing

    Beachgoing New Member

    Joined:
    Mar 9, 2019
    Member:
    #9108
    Messages:
    43
    Gender:
    Male
    First Name:
    James
    Vehicle:
    2015 T4R SR5
    Working progress.
    Just got this bad boy in. I can't wait to have my dinosaur feel like it's being refreshed.

    PXL_20220825_211844973.jpg
     
  30. Aug 25, 2022 at 2:36 PM
    SnakeDoc

    SnakeDoc New Member

    Joined:
    Aug 20, 2021
    Member:
    #22923
    Messages:
    852
    Gender:
    Male
    First Name:
    Eric
    Vehicle:
    2020 4Runner Venture & 2010 tundra limited
    Aw fuck man, this is why I don't like going on this forum! Because of shit I see and need to do it.
    I'm bugging out for months after this mod. Haha

    Link to site please? :spending:
     
    Last edited: Aug 26, 2022

Products Discussed in

To Top