1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Valve stem needed for Creeper wheels.

Discussion in 'Wheels & Tires' started by Autodok, Aug 16, 2022.

  1. Aug 16, 2022 at 8:09 PM
    #1
    Autodok

    Autodok [OP] New Member

    Joined:
    Aug 16, 2022
    Member:
    #28235
    Messages:
    1
    Gender:
    Male
    First Name:
    Troy
    Vehicle:
    89 Primer 4Runner
    Build partial thanks to RAD Fabrication in AZ. Double triangulated front link system from Rock Slayer. 14" coil overs by Locked Off-road on the front Full Hydro front steering thanks to PSC and Artec. Dana Super 60's front, Sterling 10.5 Rear w/Super 60 outers for rear steer. Rear steering is due to Busted knuckles and PSC for a full Hydro/Auto Centering system. Creeper box with 2.28 and 4.7. 63" rear springs 14" Locked Off-road smoothies in the rear. 40" Cooper Discoverer SST Pro's on 17" trail gear wheels 2 Compressors, 2 Batteries, 1 hydroelectric pump, 3 amps for stereo, 2k watt inverter, and all the relays for lights etc. (hidden under floor in rear) Soft Topper, 4 camera system, Inclinometer, stereo and lots of lights.
    To those who are running the 8 lug creeper wheels from trail-gear.
    Where did you purchase the valve stem?
    Thanks
     

Products Discussed in

To Top