4runner stock height specifications

Can you all help me to get the stock height of each corner of stock 4runner on each trim please? It has to be stock height & no additional weight like sliders. If you use below format it would really help.

Eg -

Model - TRD ORP with KDSS
Height center of wheel to bottom of the wheel well.
Front driver-
Front passenger-
Rear driver-
Rear passenger-

Or

Model - TRD ORP without KDSS
Height center of wheel to bottom of the wheel well.
Front driver-
Front passenger-
Rear driver-
Rear passenger-

Or

Model - SR5P (with 7 seats)
Height center of wheel to bottom of the wheel well.
Front driver-
Front passenger-
Rear driver-
Rear passenger-

Or

Model - Limited (without 7 seats)
Height center of wheel to bottom of the wheel well.
Front driver-
Front passenger-
Rear driver-
Rear passenger-

Thank you..

(Trying to start the thread with stock specifications first)

 

TRD ORP with KDSS bone stock with no added weight:

FD: 19.5"
FP: 19.5"
RD: 22"
RP: 22"

 

Thank you for sharing. Just the reason I wanted to get info. Everyone seems to get slightly different heights.
When I checked ORP with KDSS it measured 21.5 in rear.

 

I usually don't carry anything in the 4R. Wow, 26.5" is pretty high!

 

26.5 is after i jacked it up from the frame to see how much down travel it gets.

 

The reason measurements are different.......

1) There is slight variation from 4runner to 4runner
2) We are often times trying to compare numbers with many different variables in play (full gas tank vs empty, additional cargo, ect.....)
3) Not everyone is proficient with a tape measure (ask two people to measure the exact same thing and you will often times get different results)
4) Where exactly is the center of the hub and are people being diligent about holding their tape measure there every time?