What have you done to your 5th Gen 4Runner today?

IMHO, i like them over the newer ones. I could simply buy the newer microsd card from Amazon and life is good. No BS, trouble free.

 

Me too. I think the older units look better, as they look more designed around the interior to their respective vehicle. The new units all look the same regardless of the vehicle. I've played with the newer units in the RAV4 and Highlander. They're ok, but I don't feel like I'm missing out on anything. I don't use the Entune navigation though. I use the GPS on my phone, I might add Android Auto to my current unit in the future.

 

Finally got tired of airing up with the small portable kit (and one step closer to an air locker ). Used the M.O.R.E. bracket.

 

Gave my girl a facelift. Added the C4 High Clearance wings to my Lo Pro bumper.

 

Blacked out the badging.

 

Hey folks! I'm popping over from the Tacoma forum. My truck is getting close to a decent build stage, so I'm starting to work on my partner's 4Runner and am designing some 4Runner electrical mods. I run a small wire harness manufacturing company and specialize in aftermarket OE-style (plug-and-play) harnesses. Today I swapped out the footwell lights in our 4Runner to pink!


I designed the harness in this kit for VLEDS. When I asked my partner if I could work on a harness for her truck she told me the only condition is that they make a pink footwell light, so alas here we are now that production is complete .

 

Learned something new about the GPS screen (by accident) I did the updates on the head unit and noticed afterwards that on the maps North was not always up like it was before. I found that if you click on the little direction icon in the upper left corner it switches between three settings, North is always up, up is the direction you are heading, and sort-of 3d (but not very much).

Steve

 

This weekend I did some work on a 2016 4Runner and unfortunately I didn't get a picture, but I will say I got a look at the BAMF sliders they had installed. I am impressed with those sliders. Lots of bolt holes, very sturdy setup. If you're thinking about putting sliders on take a look at those cuz they are pretty nice. I have bud built on mine that I'm also very happy with. The BAMF just impressed me when I was under there

 

Do you offer any other mods/harnesses for the 5th gen 4R?

 

I’ve got the same brand door protectors on my T4R…..

 

I added the following to get wireless apple carplay:

$30 Wireless CarPlay Adapter - Fastest 5Ghz - AutoSky - Plug and Play - USB-C and USB-A Cables - Wired CarPlay Required

https://www.amazon.com/dp/B09WTTSXMQ

$50 CarQiWireless 2024 Upgrades Wireless Charger/Center Console Organizer Tray for Toyota 4runner 2010-2024 2023, Wireless Phone Charging Pad for Toyota 5th Gen SR5 TRD Truck Accessories 2021 2020

https://www.amazon.com/dp/B08V88HWRJ

Very happy with the result! I now have wireless apple carplay and wireless charging.

 

I have a harness that lets you use your inverter at 400W while in motion and add an outlet wherever you want. Here's one of my vendors that sells it:
https://guildoutfitters.com/products/400w-in-motion-harness-by-redside-electric

It's designed for the Tacoma, but I could make a super long version so that someone could plug the harness into the 4Runner's inverter (in the back of the truck) and run a long extension to the cab area where you can add a more useful outlet. It's on a shorter leash for the Tacoma because the inverter is located under the center console. Pin mappings are all the same, though, so it would just be a matter of making an extension.

I'm working on some plug-and-play switch illumination harnesses so you can illuminate your switches in the cab without splicing crap. Makes those OE-style switches light up like the factory and makes them dimmable. Tacoma version here:
https://tacomabeast.com/collections...asy-plug-and-play-switch-illumination-harness

I'm also open to whatever you 4Runner people might want. Been doing this a while, so if you have a wild electrical idea you want to made into plug-and-play I'm all ears. I don't know the T4R market (hence why I'm here), so it'd be good to hear what you all want.

 

Jerry has been building great shit for years. He also has 5th gen bumpers but I'm not sure you'd want the hoop since it seems right at the RADAR hight--idk for sure though but it is a nice bumper. I have one of his hybrids on my Tacoma as well as these cool brackets that add a great deal of strength to the bumper. And skid plates. Bay Area Metal Fab does great work.

 

Yeah, I went to the Pelfrey liquidation and almost got one of the Alum bumpers but chickened out. I have installed a ton of his stuff here during mod days because the Sacramento guys go pick up their stuff and split fuel cost to save on shipping (might not be worth it anymore haha). This was the first time I saw their sliders on a 5th gen and they looked decent for sure. Styling of their bumper for the 5th gens is not my cup of tea but i am sure it is a good product.

 

"Baby Got New Shoes". Replaced the Dunlop Grandtrek AT20's with a set of Pirelli Scorpion All Terrain Plus in the stock (265 70 R17) size. Wasn't looking to go any larger and I'm not going to do a lift. Just wanted a more aggressive tread pattern and better grip if I do take it out in the fields, etc. Main focus was I didn't want to put a heavier tire on and wanted something that also had a quiet ride. Most of the reviews I read mentioned that it was a very quiet tire. It also has a high (640) treadwear rating and has the 3 Peak Snowflake, although we don't usually get a ton of snow here in Central Kentucky.

Have only driven them from the tire store to home but I didn't notice any additional road noise over the Dunlop's. The Load Index on the Dunlop's is 113 and the Pirelli's are 115 so it's not a significant increase but I do feel like it was a little firmer on turns, which is fine with me. I really think I'm going to like these tires.

As I get more miles on them I'll keep the forum updated on my views.

 

Cut new colors for the 5th Gens!

https://www.4runners.com/threads/trd-hood-scoop-vinyl-glare-deflector.25637/

 

Very nice. Recently looked for a similar contour line pattern wrap for the lower sides of 4Runner but found none. Other than this

$36 WilderWild Bike Frame Protection Tape- High Impact Clear Vinyl Wrap Includes Tool (4”x72) Bicycle Frame Protector, Mountain Bike Frame Guard Chainstay Protector (Topographic Marble)

https://smile.amazon.com/dp/B097S84...&colid=Z11YG6QQH2FD&ref_=lv_ov_lig_dp_it&th=1

Any idea of such a product to wrap the lower sides? Thanks.

 

India's outside raised day bed and stowed place during the day. For now, because at night time, unfortunately, it has to be disassembled and stowed under the deployed bed (as I do not leave anything outside the vehicle at night time just in case we have to hastily bug out).

 

That might work. The problem with a lot of the stuff out there is quality and longevity. The stuff I use would cost $1500 plus because of sheet sizing etc. I will do a little research and reach out to you (PM) and let you know what I can find/point you to.

 

I ordered a set of the VLEDS from R4T. Haven't installed yet, but hoping I can this week.

 

Those are great products! I think you should start a thread here and the other 4Runner forum on what you can offer! I think 4Runner owners would find a lot of value of what you have to offer and can give you great input on ideas/mods. I know there are a few I can think of off the top of my head.

Are you on ?

 

If you could make harnesses for those of us with JBL systems in our vehicle’s where we could easily add aftermarket stereo, amplifiers, etc. that would be awesome!

 

Right on! It seems like not a lot of people know about the 4Runner kit. The lights work just like factory footwell lights should; super bright when you open the door and then dim/ambient when you turn your parking or headlights on. Even managed to get the fade on/off like the overhead dome light.

That's a good idea; I'll make a thread introducing what I do and we can have a bit of a think tank!

I responded to your PM. I'll see what I can do -- I might need you to shoot me some pictures of the back of your HU. I have the 2020 non-JBL so I might need an assist here.

 

Did you paint your flares or are the just bare?

 

@kmorgan3 I've been hoping for a while now that someone will come out with a harness to add the new head unit with JBL to the 19 and older so I'd way be a buyer

 

Installed the ROAM 6.5' awning yesterday with mounts from Fourtrek. Very happy with the results!! Will get a picture of it set up to add to the post tonight.

 

AutoHarnessHouse has the adapter harness but the JBL requires a new JBL head unit. Looks like you could also request adapters to make it work without JBL. Worth reaching out to them if you are interested.
https://www.autoharnesshouse.com/entune.html

 

If what I'm seeing online is accurate, it's gonna be $1300 just for the new amp. I may have to look into a different option. Is 86280-35110 the correct part number?