1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: 2002 T4R Sport front end rebuild Let's talk AT-205 Re-Seal... Need (apparently rare) Accelerator Pedal Position Sensor Connector pig tail Who makes good replacement brake shoes? Where to get timing belt kit, water pump and head gasket? Has anyone used AT-205 Re-Seal on their 5VZ-FE motor?

crush washers

Discussion in '3rd Gen 4Runners (1996-2002)' started by standard, May 10, 2022.

  1. May 10, 2022 at 9:27 AM
    #1
    standard

    #1
    standard [OP] New Member

    Joined:
    Apr 9, 2022
    Member:
    #26512
    Messages:
    83
    Gender:
    Male
    Pacific Northwest
    Vehicle:
    1999 4Runner SR5 4WD
    stock so far, what could he possibly need
    Last edited: May 10, 2022
    standard, May 10, 2022
    #1
  2. May 11, 2022 at 7:03 AM
    #2
    negusm

    #2
    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    2,212
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    I got a bunch from the dealer. Toyota engineers know best.
     
    negusm, May 11, 2022
    #2
  3. May 11, 2022 at 12:19 PM
    #3
    PhantomTweak

    #3
    PhantomTweak New Member

    Joined:
    Dec 20, 2019
    Member:
    #12402
    Messages:
    1,227
    Gender:
    Male
    First Name:
    Patrick
    OREGON
    Vehicle:
    1999 4Runner, bone stock
    None. Bone Stock. EXCEPT: Brushguard, tow hitch, both welded to the frame. It's good to have friends and a fully equipped garage!
    ^^ This.

    Always go with OEM if at all possible, and they're not very expensive at all from the dealership. I always get my new crush washers from my local dealer. Also, always get extras. You need 5, get 7. If you don't, you'll need them, invariably.
    If you don't need them for this job, you've got them for next time.

    Good luck! Pat☺
     
    PhantomTweak, May 11, 2022
    #3
  4. May 11, 2022 at 8:04 PM
    #4
    standard

    #4
    standard [OP] New Member

    Joined:
    Apr 9, 2022
    Member:
    #26512
    Messages:
    83
    Gender:
    Male
    Pacific Northwest
    Vehicle:
    1999 4Runner SR5 4WD
    stock so far, what could he possibly need
    Hey thanks! I have enough for this round, but now on ebay they want several shekels EACH. I wanted a kit. got 6 from a dealer. can't deal with local dealer because it's a long and expensive round trip to get to the right dealer. so my dealer is online. thanks for the input guys, i appreciate it. BTW, i got down to the rat poop and grease deck under the intake plenums. it's getting interesting down there. new injectors tomorrow, hoping they finally kill the miss so i can start doing important stuff. like drive it on the logging roads, stuff like that. Heh
     
    This site contains affiliate links for which the site may be compensated.
    standard, May 11, 2022
    #4
  5. May 12, 2022 at 11:31 AM
    #5
    negusm

    #5
    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    2,212
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    negusm, May 12, 2022
    #5
  6. May 12, 2022 at 12:05 PM
    #6
    PhantomTweak

    #6
    PhantomTweak New Member

    Joined:
    Dec 20, 2019
    Member:
    #12402
    Messages:
    1,227
    Gender:
    Male
    First Name:
    Patrick
    OREGON
    Vehicle:
    1999 4Runner, bone stock
    None. Bone Stock. EXCEPT: Brushguard, tow hitch, both welded to the frame. It's good to have friends and a fully equipped garage!
    There's several different washers needed per vehicle. Cold Start injector top and bottom, Fuel pulsation damper, FPR, etc. The only ones I've seen included with the part they're intended for is the fuel filter washers.

    Those are for the oil drain plug. On my 87's, I never changed them. I should have, but I didn't. Never had a leak, though. Anywho, there's a lot used in one of our trucks, and they come in several different sizes.

    Remember as well, to NEVER reuse them. Even if you just tighten down onto one to te point of slight deformation, it can't be reused. That's another good reason to get extras BTW. I almost always put a part on, need to remove it for some idiot reason, and then put it back on again. If I only have the bare minimum needed, back to the dealer for more! If I get too many before I start, I never need the extras. Murphy rides in my back seat, I think...

    Good luck!
    Pat☺
     
    PhantomTweak, May 12, 2022
    #6
  7. May 12, 2022 at 2:45 PM
    #7
    negusm

    #7
    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    2,212
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    Whoops, yeah he was asking for the fuel system but he posted a link to oil washers. I was a little confused.

    You can't use the oil washers for the fuel system.
     
    negusm, May 12, 2022
    #7
Register FREE to Reply!

Products Discussed in

Genuine Toyota - Oil Drain Plug Gaskets (QTY10)
$13.52
Mudder 50 Pieces Aluminum Engine Oil Crush Washers 14 mm Drain Plug Gaskets (Compatible with Honda OEM 94109-14000 Civic Part)
$6.49
To Top