What have you done to your 5th Gen 4Runner today?

Finally lifted mine, got new tires and took it out to play in the dirt.

 

Thanks mate

 

Did my first oil change and tire rotation. I miss having the filter under the hood like my old Tacoma and Subaru. Swapped to the metal oil filter cartridge housing while I was there.

 

Why do you guys worship death? Skulls and punisher gear are cool when you're like 13 years old.

 

Perhaps a butterfly or tulip instead, hmm?

 

Let’s see your rig man. If I wanna strap a dildo to the hood and warship blades of grass I will. (Not that I warship death) but This is America

 

Sorry your friend's warship just got sunk, comrade. Here's my truck. You were right!

 

Super hardcore bro, not my preference on color but it’ll do

 

Disconnect links on. clearance is tight when at full droop but it gets better when compressing. Little noisy when disconnect, defiantly smoother on dips and holes when unhooked. Surprisingly easy to re pin. Front suspension is stiff at full rear flex, about to lift the rear wheel it’s only slid up the link an inch. Happy so far we will see how they last

 

Lol I love how your son is so into it. Our vehicles are so close to the same thing.

That fitment is tight and looks like it rubs.

 

Haha yea him and the baby love it , my oldest girl is over it lol. And there is 1/16 at full droop. But ride height and compressed are much better. The spindle moves away from the rig as the suspension compresses so no big deal

 

That's "I sunk your Battleship"....ha ha ha.

Good looking edibles processing unit! How old is Bodie?

 

Yeah in that picture it just don't look right

 

Would you recommend the purchase?

 

Yea it’s close, you could slide a few pieces of paper between it, but that’s with the suspension hanging tires off the ground. Gets better when sitting

 

Well I don’t regret buying them. Tho I’ve only driven a 1/2 mile with them on on a gravel pothole road. The clanking sound is noticeable with the windows down. Hoping to form a better opinion on then next weekend when we get out on some trails. 4 runner is the toy so it’s rarely driven anymore other than camping/ trail runs

 

Few more installs today. First, installed a vent for the water tank and sent through the vent tube and into the tank a thermometer probe that is monitored by the RedArc RedVision Battery Management System. Second, because where the water tank is installed permanently it's challenging to see how full or empty it is. Thus, installed a water level monitor that has its own display but is also monitored by the RedVision. Wanting to see how accurate the monitoring system I marked the tank depth on a wooden rod with a black line. Then randomly filled the tank with water and measured where it landed on the wooden rod; asking My Life how full she thought the tank was and she said about 2/3 or 66%. The monitor calculated 67% full. Accidently overfilled the tank to the rim, the watermark above the black line on the wooden rod, and the monitor read 100% full. The monitor comes with a power switch for the water pump so changed out the previously installed one. Third, changed a breaker switch from 15A to 20A after having to change where the induction stove was plugged in before, as the cord was too close to the heater, NO Bueno. Once satisfied with the components will complete this panel on the passenger side to look like the driver side panel. Or might change both to pegboard instead of cedar. Not sure which yet. Fourth for today, installed an under the hood rodent repellent (

$30 Under Hood Animal Car Repeller Rodent Electronic Repellent Ultra Sonic Rat Strobe Light Keep Mice Away from Car Pest Prevention for 12V 24V Automobile

https://smile.amazon.com/dp/B07LCKBGY8?ref=ppx_yo2ov_dt_b_product_details) and will install the same in the cabin. Both are connected to the house battery so as to not drain the start battery.

 

That’s awesome. Would you mind showing a pic of it on the truck & disconnected? Besides just pulling the pin, does anything come off when you disconnect it? Does the sway bar drop? Seems like the link parts and sway bar sticking in there would get pushed around and bound up on stuff. So many questions… I’d like to see a video of that while the suspension is being worked.

 

Yea I’ll grab some more pics in a bit.all you have to do is pull out the pin. The pin holds the collar down preventing the lower hiem joint from sliding up.let me search for a video link. I think I left one a few posts back


Edit: here it is
https://youtu.be/A5hNI2M_8mM

 

Gracias! That is very cool! Clever invention.

 

Those disconnects look nice. When I had my Tacoma, no one had a quick disconnect solution. I ended up just removing the sway bar.

 

@steal I don't but I wasn't doing the installation either. I purchased these from tire rack and they have a company that will deliver and install. I wasn't home and my wife took the pictures for me.

 

I’ll have em out on the trail next weekend so we’ll see how good they do

 

Yea I was just about to remove mine also

 

With the Icon suspension, no sway bar gave a much better ride both on and off road.

 

OEM audio plus shipment finally came in, now to install !!

 

I’m positive of that, until you have to steer hard at higher speed and it causes a wreck.

 

The Icon suspension is stiffer than stock. Even with no sway bar, I had no body roll.

 

This is great! Last I had looked into these, I saw that the guy wasnt making them anymore. Please keep us updated on what you think of them after some use.