Grease gun recommendation

Don’t have one, need one. What’s everyone using?

 

I've tried plenty of different grease guns, and was never happy with any of them. I always had problems with leakage on the shelf, and even bigger problems when re-loading them. Until I splurged and bought one of these:



It's a Lube Shuttle (see https://lube-shuttle.us/) Instead of pushing a replacement cartridge into the tube then pushing the plunger through the grease and priming, these replacement cartridges screw into the tube. No messy reloads. I added a Lock N Lube (https://locknlube.com/) coupling and this thing is clean, and efficient. I work on my own tractor, chipper, ATV, and 4Runner. My tractor has a driveshaft zerk that is impossible to get the coupling on, so I bought a right angle coupling and then for an even more difficult location a grease needle:







I still prefer a manual pump over one of the nice battery pumps. These aren't cheap, but I have more invested in a small pile of leaking cheaper ones on my shelf.

 

We use a regular manual gun like the shown above, while we do have a battery operated one, I prefer the manual one for the 4runner because these zerks require only a few pumps to maintain, the electric one is used on the farm equip. There are several models and makes to choose from, if you like youtube, check: projectfarm for the 'lowdown' on grease guns... he has vids on everything, he probably has vids on grease guns too.

 

I use a gun from Lock n Lube.

 

Do you buy the grease from them? Or do you buy empty cartridges and fill them yourself? If you do use theirs, which lube do you use for the 4Runner unjoints?

 

Lock n Lube works for me.

 

I use the G200 EP for everything. I buy them OEM when they have sales. But, my 4Runner only has about 800 miles on it, so I haven't lubed anything on it yet.

 

What is the lube schedule on the 4r and is there a "map" of all the different nipples or lubrication points?

 

$238 DEWALT 20V MAX Grease Gun Kit, Cordless, 42” Long Hose, 10000 PSI, Variable Speed Triggers, Battery and Charger Included (DCGG571M1)

https://www.amazon.com/DEWALT-DCGG571M1-20V-Cordless-Grease/dp/B00FL2SOXW

 

I try to do mine every tire rotation

 

Is there a YouTube demo on the points to lube? Thanks!

 

Greasing is not rocket science, nor does it have to be done often enough to justify anything more than a manual with a flexible nozzle. Sorry, JMO.

 

I just got the locking end for my gun. Can’t wait to try it out.

 

Been using this.. easy one hand use, goes on all 6 zerks on yokes and spider joints.

 

Bump. Is there an online reference of where the points are that need greasing? Thanks.

 

Three on each driveshaft 1,2 and A for 4x4's at least ,six total...and "A" I believe is supposed to take a different grease.
I've been using Superlube brand grease for them all on my 3rd gen(250k miles) and my old 2010 5th gen I owned for 6 years and have NOT had the famous driveshaft clunk from sticky grease these can get.

I have'nt greased the 22 yet.