1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Dealer only flex fuel line?

Discussion in '2nd Gen 4Runners (1990-1995)' started by Albani, Dec 10, 2016.

  1. Dec 10, 2016 at 4:15 PM
    #1
    Albani

    Albani [OP] New Member

    Joined:
    Nov 29, 2016
    Member:
    #3101
    Messages:
    6
    Gender:
    Male
    Pflugerville Texas
    Vehicle:
    1995 Gold 4Runner Limited
    95 4Runner fuel line between hard line and sending unit has nasty bends and I want to replace. Autozone says dealer part. Any way I can keep from going to dealer?

    IMG_1360.jpg
     
  2. Dec 10, 2016 at 7:05 PM
    #2
    robertd33

    robertd33 New Member

    Joined:
    Oct 13, 2016
    Member:
    #2827
    Messages:
    11
    Gender:
    Male
    Vehicle:
    95 3vze
    haven't seen that, but if you let me know where it is, i can sell you it off my parts 95
     
  3. Dec 12, 2016 at 5:59 AM
    #3
    Albani

    Albani [OP] New Member

    Joined:
    Nov 29, 2016
    Member:
    #3101
    Messages:
    6
    Gender:
    Male
    Pflugerville Texas
    Vehicle:
    1995 Gold 4Runner Limited
    On top of fuel tank. Under the right rear passenger seat is a small cover plate with 3 screws. Remove that and you will see one end. The other end you can't reach unless you drop the tank or cut an access hole.
     
  4. Dec 13, 2016 at 4:14 PM
    #4
    robertd33

    robertd33 New Member

    Joined:
    Oct 13, 2016
    Member:
    #2827
    Messages:
    11
    Gender:
    Male
    Vehicle:
    95 3vze
    i saw the accessible end. are you sure you need this? the end is pretty rusty, but the part of the hose i saw looked good.
    yours has "nasty bends" but does it work? unless you're up for like $30... maybe yours isn't that bad... it's cold outside.[​IMG]
     
  5. Dec 15, 2016 at 5:47 PM
    #5
    Albani

    Albani [OP] New Member

    Joined:
    Nov 29, 2016
    Member:
    #3101
    Messages:
    6
    Gender:
    Male
    Pflugerville Texas
    Vehicle:
    1995 Gold 4Runner Limited
    Mine has a bad bend but no splitting and I had to get the 4Runner back on the road asap. I massaged it a bit with pliers and put it back in. Running great. Thanks for taking the time to look for me.
     

Products Discussed in

To Top