What have you done to your 5th Gen 4Runner today?

Finished my install on my 2013.
Dobinson 300 front coils
Dobinson 599 rear coils
Bilstein 5100’s at the stock setting (no preload).

I don’t have accurate measurements yet as the snow on the driveway needs to melt to its level. But visually I am stoked and the ride quality is really good just on my quick test drive after install today.

my TRD PRO wheels are on backorder and should be here in a few weeks. 275/70’s will go on when these wear out.

I am sure I’ll get comments on the rear bushing not being tight enough. I followed the placement to the specs of bilstein and the nuts are all the way tight to the end of the threads. No noise on the speed bumps I tested and shocks don’t move at all. maybe bilstein changed something with the latest addition of their 5100’s? They included additional alignment washers now that didn’t exist when I had my 4th gen 4 years ago.

 

Added a JLT catch can. I'm not expecting much in returns but it was fairly cheap. Later when I supercharge, it will keep oil gunk out of the intercooler.

 

Chrome delete with a little rattle can…

 

I personally like to replace the entire rear wiper arm, instead of just the insert. Part number: 85242-25050

If you want to just replace the insert, Part Number: 85213-42040

 

You can always sell those suckers on Offer up, if they are newer, $300 should be easy, I got $300 for mine and went right to my wildpeaks.

 

That is a good thought! did you sell wheels and tires with them or just the tires for $300?

 

Nope, the original SR5 wheels will forever remain in the garage (In the TRD boxes lol), if my vehicle is ever totaled, I want to pull off my rims, and have the SR5 rims wrapped with used tires from the hood lol.

Just had a friend's Jeep get totaled when field mice made a fire in the engine compartment. He tried in vain to pull off as much stuff as he could from the vehicle before the insurance company towed it away and wrote an estimate.

 

Got a chance to use various 4WD modes in the heavy foot of snow we have here in Southern MD. This thing is so flawless. I was able to get over the "snow boulder 3 ft high walls" of snow plow throw-offs with zero problems. I'm impressed.

 

I was using the Stock Nitto Grapplers.

 

Yes. I think all 22 pros come with those unless there's a one-off upgrade available... and I tend to agree after today. It was much easier than my previous 4x4s in the snow.

 

Same tire that is stock on the 2021 Pro. Homeboy GenoBluzGtr got the snow this go around. We are usually blessed with the greater snowfall to the west of DC. Barely a dusting here in Urbana (Frederick County, MD).

 

Ha.. Yes. Down here in Smibville, I got 11.5" and have 14 trees down in my yard. Heavy, wet stuff.

 

Nothing crazy just some trail decals.

 

Got my TRD Pro grill and valance installed along with my LED Rators...
Also finally found a paint to match my wheels so I sprayed a couple coats on my new emblems... Not a big fan of chrome

 

Almost have all the lights switched over to LED now! replaced the DRL today. It’s silly to me that they don’t put LED all the way around at the factory. Soooo much better. (To me, anyway)

 

what did you use for the DRL's? they are the only non led bulbs on the outside of my Pro.

 

Check the thread a few below this one for the link, it’s the first one posted.

https://www.4runners.com/threads/led-drl-for-2021-trd-pro.20722/

 

Installed This GPS tracker:

 

... and this battery tracker:

 

Have done... Unfortunately nothing today. Want Done... Now thats a good question. All the things!

 

Upgraded my 10-13 rear lights to the 14-22's. Full write up right here:

https://www.4runners.com/threads/upgrade-tail-lights-10-13-to-14-22.23899/

 

What color and where'd you find it?

Ive been thinking about the Anthracite color from Plastidip but seems I can only buy it from DYC.

 

looks nice and clean.

 

Thanks man, looking forward to the front-end now

 

Krylon. Found it at Ace Hardware.

 

where did you plug the speaker input for the subs? or you just tap on the speaker wires?

 

doood... i wish we had that much snow here in Utah

 

Ok the truck looks great but your pup looks cuter than the truck and the skid plate combined

 

Sometimes having aftermarket shit is a pain in the ass. Ordered $40 brackets to fit my diode fogs to my new bumper, to find they don’t really work that well. Then realized I need to order flat bezels to make them work. Said f it and rigged it the way it is.

 

Installed my AVS vent shades. I like how flush they are in comparison to the ones that bulge out. 10 minutes to install