What have you done to your 5th Gen 4Runner today?

Got my wheels and 275 Falkens installed today. Was hesitant about the bronze but I'm digging it.

Little rubbing when at full lock turned right in reverse.

 

And just ordered bilstein 6112s for the front. Just going to level it. Hopefully won't compromise the ride too much.

 

Installed a red led light connected to the water pump circuit for the purpose of NOT forgetting the pump is idling. This can easier be done with a pilot light switch, however, this circuit is a 3-way on/off circuit (while two pilot light switches would work as well, this detail is a bit more appealing). The 3-way allows the system to be turned on/off either at the tap or the fill. The reason, the fill uses the pump to fill the tank from a non-pressurized source, ie river, instead of pouring the water through the fill cap. Having a switch at that point allows watching over the fill and turning it off before full. NOT wanting that switched accidentally activated it's installed below the floor. The 2nd switch is plain LAZINESS(!) of NOT wanting to walk to the 1st switch location. The non-lazy benefit of the2nd switch allows the use of the tap when the bed is deployed and NOT having to go outside to active the 1st switch. As a precaution, the 2nd switch is (somewhat) countersunk rather than flush and protected by a wall from being accidentally activated. (That aside, the fill passes the water through a 0.02-micron filter from the source to the tank and a second time from the tank to the tap, or once to the tap from a source other than the tank. System NOT my original but instead copied from Dan Grec of The Road Chose Me fame. Differently, Dan used four 2-way ball-valves and I used two 3-way valves.)

 

Did fender trim on both sides. After the lift there still was no rubs but alignment did put caster forward a little and it started to rub.
Happy with the result, no rubs with plenty of room to spare for future 275 70R17.

 

Those Elkas look really good.

 

I was there with Toyota!

 

[/QUOTE]
Not me I am in PA lol.

 

Just received the red trd push button start that I purchased through Facebook. Came with the button removal tool. Appears to be pretty much identical to the meso customs kit. Just waiting for the blackout kit to arrive.

 

I got it in 3 weeks I jumped on an allocation a guy backed out of for a Tundra.

 

I forgot to post this but recently put my winch to good use (4Runner not pictured but it is the one doing the winching). Had to take the quad off the back of the truck.

 

those gray wheels on white is a real sharp combo

 

This a great idea for a chase light! I am often the back vehicle on Overland trips. Also would be nice for snow recoveries.

 

Forgot to mention that I pulled the liner forward and drilled new bolt locations for them as well.
Pics are in reverse, full right turn.

 

External speaker and mic, ham install is finished. Made contact with a couple guys last night probably 30 miles away, they were both on base stations.

 

If they're sitting on the lot, I assume they have a markup. Unless the market really is slowing way down.

 

I got mine today too (from same source as yours)... have you found any place that has the blackout trim ring in stock/ Meso Custom is out of stock... that's the only one I can find.

 

Pulli out the ring, take some 400 sand paper to it and paint it or plastic dip.

 

We gave up on the Pro. Nothing we could find for less than $65k...just not worth it to the banker (wife). We still spent $50k with all the options she wanted - minus the "pro". Enjoy it, the Lime Rush is awesome.

[/QUOTE]

 

negative. i put in my order for the blackout ring a couple of days ago and is on its way. i hope i wasnt the one that got the last one available!

 

Made the 6 hour round trip to Philly to pick up my oldest daughter from Grad school for Xmas. Great weather and good run - truck performed flawlessly and lots of 4R's out today including 2 TRD Pro's right in downtown Philly

 

[/QUOTE]
I got it for MSRP from Bobby Rahul Toyota in Mechanicsburg Pa.

 

New shoes

 

I added a bunch of my patches to the headliner. I also put in the stuff my wife got me for Christmas.

 

Merry Christmas! We thank you for your service.

 

Screen protector for OEM radio, Morimoto black LED fog lights, LED interior lights, and red start/stop button.

 

Got my Gobi Rack, DD SS3 Pro Fogs, and modified my headlights so my 9005 bulbs are ACTUALLY used as high beams!

 

Put on some durobumps

 

AJT has them in stock. Just ordered one.