1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Lift confusion, Help

Discussion in '3rd Gen 4Runners (1996-2002)' started by krakidsr5, Oct 9, 2016.

  1. Oct 9, 2016 at 12:05 PM
    #1
    krakidsr5

    krakidsr5 [OP] New Member

    Joined:
    Oct 9, 2016
    Member:
    #2801
    Messages:
    5
    Gender:
    Male
    Central California
    Vehicle:
    1996 4runner sr5, stocker than stock
    :(
    Just recently bought a 96' sr5. Its 2wd however i was wanting to lift it about 3" or so to enhance the look. Ive come across the toytec boss coil over set through skimming other posts. However, i was wondering if there were any other cheaper options that would accomplish the same goal since it is only my daily driver and won't be seeing trails. I am leaning toward the toytec boss lift kit because its a 96 with about 215K miles on it. So i figured instead of doing spacers or what not and going cheap, i might as well replace most of the suspension on the thing since its old anyway. However again its only a 2wd and won't be seeing trails so wasn't sure if it would be necessary to go coil overs. Or if i could maybe get away with something life rough country or a lesser brand since it won't be taking a beating. Thanks in advanced
     
    Last edited: Oct 9, 2016
  2. Oct 10, 2016 at 10:07 AM
    #2
    YotaDan

    YotaDan New Member

    Joined:
    Apr 16, 2014
    Member:
    #68
    Messages:
    162
    Gender:
    Male
    First Name:
    YotaDan
    Grants Pass
    If it is just a Daily with no off-road use a spacer lift works well. But since it is probably due for shocks anyway, the Bilstein 5100s would be a good choice.
     
  3. Oct 10, 2016 at 10:36 AM
    #3
    krakidsr5

    krakidsr5 [OP] New Member

    Joined:
    Oct 9, 2016
    Member:
    #2801
    Messages:
    5
    Gender:
    Male
    Central California
    Vehicle:
    1996 4runner sr5, stocker than stock
    :(
    Ive seen those, So just swapping the shocks up front for the bilstien ones and swapping all the coils to achieve the 3" lift? or...
     
To Top