1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Tacoma steering wheel interchangeable? Key Fob Upgrade Tail Lights - 10-13 to 14-22 Rear hatch rust?? Aftermarket remote start Anyone not get flashing dash lights when using OBD jumper trans method?

Quick disconnect Sway bar end links??

Discussion in '5th Gen 4Runners (2010-2024)' started by M_RED, Jul 18, 2021.

  1. Jul 18, 2021 at 9:42 AM
    #1
    M_RED

    #1
    M_RED [OP] New Member

    Joined:
    Jul 14, 2019
    Member:
    #10550
    Messages:
    56
    Gender:
    Male
    Vehicle:
    2019 TRD Pro
    Eibach 1.6in LIft springs and 0.25 in spacer in the front Eibach +200lbs load leveler system in the back RSG Angled Sliders
    I did a cursory search and all I am really finding is adjustable length sway bar end links, but none that are quick disconnect types...

    Can anyone point me in the direction of a decent set of end links with the ability to disconnect quickly? I like the JK ones popular with the Jeep folks, but don't see anything that would fit a 5th Gen 4Runner....
     
    M_RED, Jul 18, 2021
    #1
  2. Jul 18, 2021 at 9:44 AM
    #2
    Mtbpsych

    #2
    Mtbpsych New Member

    Joined:
    Dec 3, 2018
    Member:
    #7922
    Messages:
    1,886
    Gender:
    Male
    Vehicle:
    2018 SR5
    Mtbpsych, Jul 18, 2021
    #2
  3. Jul 18, 2021 at 12:06 PM
    #3
    M_RED

    #3
    M_RED [OP] New Member

    Joined:
    Jul 14, 2019
    Member:
    #10550
    Messages:
    56
    Gender:
    Male
    Vehicle:
    2019 TRD Pro
    Eibach 1.6in LIft springs and 0.25 in spacer in the front Eibach +200lbs load leveler system in the back RSG Angled Sliders
    Interesting... Any my experience directly contradicts that first link.. I will say, that if any of the driving is over 25mph, I'd keep all the links attached. My thought is to use the quick disconnects on those times when I miss my Fully locked XJ. Really rocky, 4Lo, crawling type stuff. Quick disconnects will definitely help in the rear, and I firmly believe they help in the front as well....

    I found that second link, but apparently didn't read far enough down to see the disconnect ones.. thanks!
     
    M_RED, Jul 18, 2021
    #3
  4. Jul 18, 2021 at 12:18 PM
    #4
    Thatbassguy

    #4
    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,642
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch

    Agreed! Physics also contradict that link.

    The sway bar does exactly what they are saying a sway bar disconnect would do. Disconnecting the sway bar will allow the front suspension to flex more independently. I'm not sure how anyone with suspension knowledge would say otherwise.

    I thought there was a link awhile back in another thread to sway bar disconnects made by a member on another forum. I'll see if I can dig it up.
     
    Thatbassguy, Jul 18, 2021
    #4
  5. Jul 19, 2021 at 12:28 PM
    #5
    M_RED

    #5
    M_RED [OP] New Member

    Joined:
    Jul 14, 2019
    Member:
    #10550
    Messages:
    56
    Gender:
    Male
    Vehicle:
    2019 TRD Pro
    Eibach 1.6in LIft springs and 0.25 in spacer in the front Eibach +200lbs load leveler system in the back RSG Angled Sliders
    Well, I searched a bit, and kinda found what I wanted, but not exactly what I want... so Maybe I will try to build something myself...

    In the meantime, here is 2nd gen rear links that are just a hair over 1 inch longer than 5th gen ones, and way cheap. THey should be an easy replacement.. bolt right in..

    About 20 bucks on Amazon...
    1 inch longer:

    ProForged 113-10144
    ACDelco 45G0263
    General Motors 89056190
    $22 Moog K80380 Suspension Stabilizer Bar Link for Toyota 4Runner
    Moog K80380
    Rare Parts 18814
    Raybestos Chassis 545-1263
    XRF K80380


    I think these should fit too, but vary from .5 to just hair under 1 in longer I think:
    ACDelco 45G0263:
    Moog K80469:
    Skyjacker SBE702:
     
    M_RED, Jul 19, 2021
    #5
    Thatbassguy likes this.
  6. Jul 21, 2021 at 9:18 AM
    #6
    Big B

    #6
    Big B Out Exploring

    Joined:
    Feb 27, 2020
    Member:
    #13316
    Messages:
    220
    Gender:
    Male
    Reno/Tahoe
    Vehicle:
    2020 TRDOR
    KINGS! w/ adjust Method Race Wheels, Good Year Ultra-terrains 285/70/r17, GOBI Rack, Baja-Designs/Cali-Raised LED Lights, SSO stealth front bumper, RSG Sliders, FACTOR 55 ultrahook Smitty Bilt x20 winch (syn.), TYT TH9800, X Bull Recovery Boards
    subscribed....please update with progress
     
    Big B, Jul 21, 2021
    #6
  7. Jul 22, 2021 at 5:25 PM
    #7
    M_RED

    #7
    M_RED [OP] New Member

    Joined:
    Jul 14, 2019
    Member:
    #10550
    Messages:
    56
    Gender:
    Male
    Vehicle:
    2019 TRD Pro
    Eibach 1.6in LIft springs and 0.25 in spacer in the front Eibach +200lbs load leveler system in the back RSG Angled Sliders
    For that first batch of part numbers, here is the stock link vs the 2nd Gen MOOG pcs..
    It's about an inch longer and puts the sway bar in a pretty good spot, I'm happy with the angles..
    (I know the paint looks a little cheesy, but after living in the midwest for quite some time and learning to fear the rust, I figured an extra coat of paint wouldn't hurt... Probably needed to be a shade darker to better match Fox Red... oh well)

    This should be fine until I work on the quick disconnect idea I have..

    [​IMG]
    [​IMG]
     
    M_RED, Jul 22, 2021
    #7
  8. Aug 9, 2021 at 12:23 PM
    #8
    Big B

    #8
    Big B Out Exploring

    Joined:
    Feb 27, 2020
    Member:
    #13316
    Messages:
    220
    Gender:
    Male
    Reno/Tahoe
    Vehicle:
    2020 TRDOR
    KINGS! w/ adjust Method Race Wheels, Good Year Ultra-terrains 285/70/r17, GOBI Rack, Baja-Designs/Cali-Raised LED Lights, SSO stealth front bumper, RSG Sliders, FACTOR 55 ultrahook Smitty Bilt x20 winch (syn.), TYT TH9800, X Bull Recovery Boards
    Mike Studt at mwstudt@yahoo.com supposedly makes ones that work ... @Wanderlust overland did a video of them on their fj and quite a few others have used em on the 5th gens
     
    Big B, Aug 9, 2021
    #8
    Thatbassguy likes this.
Register FREE to Reply!

Products Discussed in

MOOG K80380 Suspension Stabilizer Bar Link for Toyota 4Runner
$21.14
To Top