raptor lights

2020 4Runner Venture

just installed the TRD pro grille with raptor lights.. followed a YouTube video and my raptor lights don’t shut off when the car is off.. the positive is plugged into the only remaining spot in the fuse box and the negative is on the bolt beside the fuse box.. not the most mechanically inclines.. any help is appreciated. Thanks

 

Wait did you just plug into a random fuse location or did the instructions say to plug there?

 

Need a fuse tap and go to the ignition 10 amp.. that or t tap the parking lights and use an inline fuse

 

FYI the 2020 have different fuses alignments especially in the cab fuse box and a little bit as well in the engine bay fuse box, I had to play around to fine an empty one that wasn’t “always hot” and ultimately, could not, just used the included n+1 fuse tap included and went into the spot recommended. Unfortunately it means box in engine bag doesn’t close perfectly, but tight enough- I was able to do the bolt trick - if standing by front driver tire looking across the engine bay it’s the bolt apparatus in the back right of fuse box- to feed the wire up and through so it at least looks a little cleaner.

but yes to answer your question, the empty engine box fuses spaces all seem to be always hot.

 

So I plugged mine into the “INJ” spot on the engine bay fuse box with the adapter my lights came with to have 10/5 fuses.. they are on only when the engine is on, then turn off.

I did just discover yesterday that the cabin fuse box is unfortunately different in the 2020s as we attempted to install a switch, and finally gave up until I do a little bit more research.

 

I have a brand new set of raptor lights for sale on here. I decided not to add them. I put my Bajadesigns 20 inch led bar in behind that grille part. There is a video on you tube the guy added them to his 2020 Pro. I think he has them in the INJ spot in the fuse box.

 

Has anyone found a Raptor light kit that fits the 2020 Venture grille? The top of the grille does not have a honeycomb pattern. It has the Toyota oval emblem in the middle and some rectangular slots on either side.

 

I searched everywhere for square raptor lights to for the Venture with no luck. People were saying to get a light bar instead but I love the look of the raptor lights. I ended up buying a TRD Pro grille.

 

You can do it on the non-pro grille. Just have to go with two instead.

 

Could you post pics of what you did please?

 

Update:
I found some for the 2020-21 non-pro grill. Very pricey IMHO

https://www.yotaleds.com/products/2020-21-4runner-5th-gen-non-trd-pro-grille-lights