Fox 3.0 x 600lb Coil Springs

If you are interested in replacing your worn out or rusty springs, here is a cheap option to do so!

These are standard springs that come off Fox 2.5 Coilovers for Tacomas, and will also fit 4Runners with a Fox, King, Radflo, Icon 2.5 Coilover. These are take-off springs, not used, but do have minor scratches and dings.
https://accutuneoffroad.com/product/fox-3-0-x-13-x-600lb-coil-spring/

 

that's a heck of a deal

 

We also have (2) pairs of 14" x 600 springs that I will be listing soon.

 

To be completely honest with you, I have very limited knowledge of suspension info. I was planning on replacing my front coil springs with Old Man Emu 881 and my front shocks with Bilstein 5100 . I hate to see a bargain like this go by. Would these fit the same way the 881 coils do? I would like about a 2.5" lift for my 3rd gen 4runner.

 

I cannot confirm fitment on every coilover shock out there. I believe those coilovers need a open ended type of coil spring, not like these.

 

these would work on 6112 Bilsteins Coilovers, not regular springs that goes on 5100 or OME shocks

 

Not sure which springs came with my extended travel fox 2.5. Would the 14” springs work on them to have less preload and same lift and ride quality? Or am I better off getting heavier springs. Planning on full bumper and winch.

 

These are the same springs that come on 4Runner Fox 2.5 Coilovers. You may want to add the bumper and winch, adjust preload and then see if a 700lb spring is needed.

 

Now that you're here.

Suggested approach after adding Victory's Blitz aluminum/steel winch mount and winch with a combined weight of 130 lbs. (TRD PRO)

Left a message on your phone system early AM.................

 

For any questions in regards to spring rates on your personal vehicle, please take a look at this Tech Article:
https://accutuneoffroad.com/articles/coilover-spring-rates-for-toyota-tacoma-4runner/

 

Read it end to end.

"Contact AccuTune Off-Road for help selecting your spring rates and for more detailed rate calculations."

 

PM sent!

 

Thanks for getting me squared away. Much appreciated.

 

PLEASE let me know when

 

PM sent!

 

Waiting for a pair of 14" x 650 listing.

 

these guys will buy them if I post them on the forum thread

 

I have king #650 powdercoated red on my 6112 already

 

We have (2) Fox 14" x 600lb springs from a 4Runner Fox 2.5 Coilover. $40 for the pair plus shipping. First come first serve! Message me if you want em