What have you done to your 5th Gen 4Runner today?

I did the same Borla muffler with stock pipes and very satisfied with the end results.

 

Yep I'm "the father" and I agree completely. I really recommend this for a little boost in power and the stock muffler is just so quiet. The sound is OK for a 6cyl. Here's a link to my post on the installation. #5562
https://www.4runners.com/threads/wh...h-gen-4runner-today.2261/page-186#post-103047

 

Installed the rear hatch panel the plan is to attach the front runner kitchen back and my paper towel holder to it for when we’re out Camping to make the kitchen a little more complete. Also took the Plano box off the roof after back and forth I agreed it looked off with such a long rack. I am ordering a taller longer box to put our sleeping bags, air mattress snd some other items I’m. But will only put it up there when we go out.



Sorry in advance for the crappy pic only way to get the whole thing in frame since the dometic is back there.

 

Thank you for the link and reply.

 

Agreed, the V6 will never sound great. Again, thank you for all the information. Much appreciated.

 

Scoshe Magic mount phone mount

Dongar Technologies adaptor for dash cam Garmin 46. Dash cam using auto dimming mirror power for clean look

 

Bashed the rear bumper. Dumbass move but all good cuz I already have a bumper in production. Otherwise I would have been more bummed.

 

Looks like Heat gun fix to me

 

Touchscreen protector.... Thank you forum for idea.

 

Zipoteloco, that’s the first thing I put on my Runner when I bought it. I don’t want to get the screen scratch.

 

Just ordered this! Thanks!

 

interested in what adapter you ended up using. does the mirror work as it should? thanks

 

Yes the mirror works fine. I used this adaptor which comes complete with all tools and instructions on how to setup

Dongar Technologies Dash Cam Installation Kit for 2020+ Toyota 4Runner

https://www.amazon.com/dp/B08TW2R2S3/ref=cm_sw_r_cp_apa_fabc_X5YWGXTNFR1DYCAMQKS7

 

If you have a 2010 to 19 4 runner it's a different adapter since the auto dimming connection is located behind the rear view mirror.
https://www.dongartechnologies.com/product/t4r/

 

Hot Damn! How did that happen? That's a 2021 too .. yeesh!

 

I thought I said dumbass.

 

2” Front and 1.5” rear with 275/70/17 Wildpeakes. I’m pleased with the outcome.

 

Which lift and did you replace UCA's?

 

Stock UCA. I went with Cornfed 1.5” rear and a 2” Rough County Front. I did put Bilstein 5100 on rear. It’s my daily and only will be doing dirt roads to fishing spots or some on beach.

 

Looks good !!

 

OE UCA's in the pic
Looks good but yes consider UCA's

 

I’ve been looking at them but right now my alignment is dead on stock settings and caster is set at 2.0. No rubbing and is driving straight.

 

No rubbing? Any other mods needed besides your lift to ensure clearance?

 

I did push the fender wells forward which was about an inch. But did not trim bumper nor did I heat the mudflaps. Full lock forwards and backwards no rubbing.

 

I am a dealer for Cornfed Suspension. If anyone is interested in a Cornfed kit, please feel free to PM, call, text me any time. 631-202-8245

 

thanks for the quick reply and the link.

 

Don't doubt the alignment is ok my concern would be the clearance between UCA and coil as it sits your probably lookin at about 1/2 in with compression it'll probably rub on the coil...at least this is what I've seen constantly

 

Looks super good tho!

 

I just looked at it after this post. It actually has close to an inch or so. This is the same set up that I have in my sons 2019 Tacoma and hasn’t had any issues. I had a 2.25” pro comp spacer in the front of my 2016 Tacoma and no rubbing on the coils or UCA. Let’s just hope it is the same with this one.

 

Nice that's sounds like good clearance but remember that while rolling that 1" can easily bum the coil...check it in a few weeks and make sure the coil isn't tapping or rubbing