Seat Risers / Spacers Mod

If you are aware of the seat mod, I did it to my Tacoma and what a difference. There is more than 70 pages of feedback in the Tacoma forum please read some of it.

https://www.tacomaworld.com/threads/fs-aluminum-seat-mod-spacers.561819/

Materials used is 6063 solid aluminum bar stock. All prices includes shipping. One seat $33 with bolts ( Grade 8 ), or $28 without bolts , Both seats $58 with bolts or $48 without bolts.
Please use kujans0@gmail.com Please know you do this at your own risk, I am making these for you at your request.
Thank you

Again one seat will be $28 without bolts or $33 with bolts . For both seats $48 without bolts or $58 with bolts, includes shipping.

Taking Paypal account, kujans0@gmail.com

Or mail check to
Dennis Towns
1534 Marble Lake Dr.
Jacksonville Fl. 32221

(Listen, 5 mins you will know if this is a nice feel for you. Just pull the back 2 bolts and slide something about an inch under each foot and sit in it. I am sure you will instantly know if it is right for you. I didn't do these to make money. ( Retired, don't need the work or $$$$ ) So after reading about all the ranting I tried it and was so impressed I figured I would make some decent ones for folks. But nothing is free, so I gotta pay for electric, machines and materials.Most common size is 1" Not getting rich. LOL ,Good luck, Be safe , and maybe , just maybe a comfortable tush .
Thank you
Not sure what year 4runners, but if your rear seat mounts are flat to the floor and not on an angle should work. If not send back for a refund.