2021 TRD Pro Grille

Can confirm that OEM parts fit the 2021 ORP.

 

Are those Toyo OC III? What size?

Look good!

 

Yep. 255/80R17. I run them on my Taco too.

 

So those are 33" tires? Do you need any mods to allow them to fit?

 

Correct, I removed the front mud flaps and did some very minor trimming in the front. But they misconception is that taller tires rub when really its the width and offset that play a much bigger factor. These are a little more that 33" tall but are more narrow than stock (255mm vs 265mm). But narrow tires do better in almost every situation off road, exception would be when flotation is a factor, very deep sand or mud.

 

Yea I can also confirm, I just installed the parts straight from a Toy parts dealer. Fits 2021 Venture Edition. I put some before and after pics for anyone riding the fence....tomorrow I replace the stock scoop with the pro model black one. For me its no question which I prefer, not even a hint of regret.

 

Thanks so much. Do you have pics of this on 2020 or newer?

 

Looks beautiful! Just wish it wasnt so darn expensive for OEM.

 

I installed the Taco Vinyl yesterday and can't recommend it. It is really hard to install the upper grill because it really doesn't fit correctly. Once forced in to position it looks okay but I'd recommend buying the OEM so you have a nice fit.

 

Thanks for the feedback. Sorry it didnt work out for you!

 

Would be interested to hear about your scoop install and how easy/difficult it is to remove the insulation under the hood.

 

Sure I just installed it last night, I'll attach an image of the after below. I'll add the part number but it was under $60 total for the pro scoop.

The install is easy, you will need:
1 - the pro scoop (P#: 76183-35080)
1 - scoop protectors/seals I just order 2x on all just in case but you only need 2 of one of these...they $2 rubber gaskets so no biggie (P#: 76185-35030 76183-35040 76183-35030)

1 - 10mm socket wrench
1 - pair of needle nose pliers
1 - bed sheet/tarp/what-have-you to cover the engine area so you don't let shit fall down in there, lol
...maybe a step stool or chair if you are on the shorter side or have a few spines fused. : )

The firewall plug removal is easy, you just have to pull it a bit to get a grip with the needle noses. Crush the stem and pull out, it might be a little tough at first but once you realize its not hurting anything its not a big deal. Once the firewall is done (I left the last row in the firewall insulation, it can take you bending it down quarter down the way to give you clearance), you will see the scoop screws and 3 bunny ear tabs (2 blue one large center red) that you will also need to use the pliers on.

Do the lug nuts first than the plastic tabs. For plastic tabs, just push all the way up with the needle noses open all the way until you hit he hood, crunch, push again, you should hear it pop out (if you want to resell, you can always replace the plastic tabs!). Pull the scoop forward, up and out and thats it!

There is a tiny grill insert in your original grill, but just press the 4 tabs on it an it comes out easy enough. Install the old grill in your new scoop and reverse the instructions and you should be good. One note...I tightened the bolts, lowered the hood, and did a little fist smack on each tab area to get those pushed in, then I tightened the bolts a little bit more and reinstalled the firewall and plugs.....done and done! Easy, easy.

 

Looks so good! Thanks for sharing.

 

Loos great and thanks for the instructions. Question ... are those N-fab nerf bars you have installed?

 

Thanks! Yea, the were already installed when I showed up. I'll probably swap them out for something a little more dog friendly in the future.

 

Hey All, has anyone tried the Grille from this site? Seems like it has solid reviews and a clear indicator of fitting 21 SR5P.

https://www.4runnerlifestyle.com/collections/grilles/products/4runner-trd-pro-grille

 

Like the finish product! Do you have a link for the lights you added to the top grille? Thinking about this as an option for my new TRD ORP...thanks!

 

I hadn't come across that site before, but that looks legit with all of those reviews especially with photos. I bought the TacoVinyl one a while back and have left to put it on because I've also heard it wasn't that great. I was trying to support a small business so I'm sad that it didn't work out well for others.

Let us know if you decide to get it and how it goes.

 

I ended up going with Cartrimhome's option. Pricings was basically the same but more reviews of what I can expect during install. I'm a fairly handy person and have the tools to do some minor custom work to fill the gap left on the sides. So not worried about it.

 

Just finished the installation of the Cartrimhome TRD grille on my 2021 SR5P 4Runner. Paid about $185 shipped with a 5% coupon from the dude on Youtube. Overall the install went smoothly. Being in western WA, it's about 50 degrees outside, so I used a heat gun to keep the plastic warm and to help mold the black front piece (where the letters go on) over the piece that stays on the car. I also replaced all the tape that came preinstalled with actual 3M automotive double sided tape. The stuff the grille comes with is pretty cheap stuff. Barely a gap on the sides. Would recommend!

 

@oconnell84 that looks great! I've been debating spraying my letters black or keeping them solver so it's nice to see the black letters on yours. I have black emblem covers on the rest of the truck so I'm leaning towards keeping the theme going in the front.

 

Looks great! Thanks for sharing. Would you mind taking a close up pic of the gaps? Mine is white so they will likely show up alot more.

 

Thanks! I really like the silver lettering but because I'm blacking out the emblems, this made more sense. I really like how it turned out! I'm sure you will like it as well.

 

Here is a close up of the "gap". Its the same on both sides. Apologies for the dirt (went up the local pass to play in the snow). There is barely a gap, if none at all.

 

This is perfect!! Wow, I would have expected a much bigger gap. Thanks so much for the pic and sharing! And hope you had fun in the snow! That's my plan for tomorrow! Haha

 

I placed an order through their website 2/8/21 based on the positive reviews. As of today I am still waiting for the order to be fulfilled, there is a 4 week lead time on these. Seems like there is always big lead times for 4runner parts and accessories...

 

Ordering right this minute. Been holding off till after the '21 gets here (soon) but why wait, I ask myself now. I'ma slap this bitch on that '21 ORP with not a minute to spare, heck yeah! I've got the black overlays for ORP already, won't need the front grill overlays out of that kit if anyone wants it. I have the new black strips for new 20/21's too, to cover those new chrome strips in non Pro grill.

 

I used runnin4tacos overlays on my 2020. The front grill overlay fell off after a few weeks while on freeway. I followed the instructions from taco twans video but it still happened. If you get these make sure you use a heat gun as in the twans video, heat the spots up good, maybe I didn't. But these overlays are good. I wish I woulda thought to use a few small dabs of epoxy for that front one.

 

Oh man, sorry to hear that! I installed them outside on a hot day which probably helped fuse them together. I even tried to pull them off my old 4Runner and install them on my new one and there was absolutely no way, the OEM badges started pulling off before the overlays.

 

Just placed an order with CTH. Hope it comes out well.