Mud guards for Night Shade edition?

I just bought a new 2019 4Runner Night Shade edition. I’m trying to get mud guards. The Toyota “standard” mud guards for the 4Runners (non Night Shade) don’t fit as they interfere with the automatic foot steps and Night Shade mouldings.

Has anyone found mud guards for their 2019 Toyota 4Runner Night Shade edition? If so, where and how much?

 

Welcome to the forum.

 

welcome

 

Welcome from FL.

 

it says it fits nightshade limited

https://parts.wilsonofamestoyota.com/oem-parts/toyota-splash-guards-set-of-four-pt76989110

 

I checked the details and the 2019 4Runner Night Shade edition isn’t listed, just the 2020 model. Thanks for the help though.

Still looking for mud guards that fit a 2019 4Runner Limited Night Shade edition.

 

Pretty sure the 19 & 20 is the same thing.

 

Any help out there?

 

Has anyone put mud guards on a 2019 4Runner Limited Night Shade edition?

 

I own a limited and this is what I had. AFAIK the night shade bumper, rocker panels and rear bumpers are the same as any limited. It just has a different paint scheme.


Splash Guards, Set Of Four - Toyota (

$92 PT769-89110

PT769-89110)
2011-2020 Toyota 4Runner

 

I'd call the parts office at the selling dealer for the oem part number.

 

I have a 2020 4Runner nightshade and tried the limited edition mud guards and they don’t fit. Has anyone found mudguards for the 2020 nightshade limited 4Runner???

 

I am looking for the same thing. 2020 Nightshade edition Molded Mud Flaps and cannot find them.
I did email Toyota directly on their web site and asked the same thing. Maybe if enought people ask, they will get them made and available to us !!!
Or maybe 3rd parties will make them like Weathertech !!

 

I bought and tried this part from Toyota and they do NOT fit the 2020 NIGHTSHADE Edition!!
Don't bother trying them. They fit all the other models.
Email Toyota Customer Support and ask them to offer Nightshade versions that fit !!

Part Number Part Name Price
PT769-89110 Splash Guards, Set Of Four for $68.00

This is a link to the Mudflaps that do not fit the NIGHTSHADE ED.
https://parts.wilsonofamestoyota.com/oem-parts/toyota-splash-guards-set-of-four-pt76989110

Make Body & Trim Engine & Transmission
2020 Toyota 4Runner Limited, Nightshade, SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, TRD Pro, Venture 4.0L V6 - Gas

Base on the Toyota accessory description above, Toyota thinks they fit but Toyota Parts counter people know better.

Is there a way to contact Toyota Accessories Department Management directly from this site?

 

I can’t believe Toyota didn’t make mudflaps for the nightshade edition. The truck gets dirty fast without them. Not sure what to do at this point.

 

On the same boat here. I am looking for mud flaps for my 2020 Limited, bought a set of these

$92 PT769-89110

PT769-89110 mudguards but they would not fit with my automatic retracting running boards

 

Attention Nightshade shoppers - if you want mud flaps/guards, do NOT sign on the dotted line until Toyota gets you some that fit. Maybe that will get them to listen.

 

Nice information everyone. It saved me from buying the -89110 mud guards that apparently will not fit. The nightshade edition appears to have an additional molding strip behind the rear wheel well when compared to the limited. I bought a 2020 4Runner Nightshade two weeks ago that has fixed nightshade running boards -89190 (which are not addressed on Toyota compatibility lists). I have been struggling to find mud guards since the body flare midway on the second row doors is catching all the road debris, salt and mud. Since I am willing to pull off the running boards, can anyone recommend a good pairing of nerf bars and mudguards that that will work with the nightshade without major surgery? No rock crawling here - just washboard forestry roads to access the back-country and sometimes deep beach sand.

 

How about trying the flat type of mud guards?

 

Looks like I will go with the flat type since a molded version is not available. Any advice on what to do with the small airfoil piece that sits behind the rear wheel at the mud guard location? I assume this can easily be removed.

 

Has anyone found any? Toyota has taken my 4 runner back to paint the doors and rocker panels. I fought hard for this. I wanna get it right when I get it back. The paint chipping so bad with 2000km on it.

 

I just got a 2021 nightshade. I had the same problem fitting the standard limited mud flaps.

the fronts were pretty easy, I just need to drill bigger holes into the mud flaps so they could take plastic pins. Then removed the thin plastic guard thing, and then installed the mud flaps in place.

the rear mud flaps are an entirely different story. The black nightshade trim piece blocks the mud guard. I tried to cut the OEM limited mud flaps, but it’s proving very difficult and now looks like shit after the hack job I just put on it. I still need to do a lot of cutting, but I know I can make it fit eventually. I have resigned myself to the fact that my hack job on the mud guard will look like shit afterward.

This will have to be a temporary solution until a more elegant product is found.

 

I was able to install a universal (non-drilled) pair of rubber mud flaps from eBay.

https://www.ebay.com/itm/303637620814

I used scissors to cut the inside of the rubber mud flaps so they would fold properly to the shape of the rear bumper. Much better than my previous hack job of the hard plastic OEM limited flaps.

They are a dark gray color and I’m hoping they don’t fade in color even more, but overall I’m happy until an OEM ever comes about.

 

Hey guys,

I'm getting my Nightshade next spring and was shocked when I found out there was no way to install the factory mudguards on it. I had an '18 and a '19 Limited and the mudguards felt like a security blanket against chips and scratches. I started looking in the aftermarket and found Rokblokz. I spoke to a representative named Tylor and he told me that a customer was able to install the flaps on his Nightshade, but the only problem was that the rear didn't sit flush due to the Nightshade lower trim.

Talking to him more, he told me that the company would like to create a solution for the Nightshade community and if any of you are in Utah, he'd like you to reach out.

This is the page I used to get in contact: https://rokblokz.com/pages/contact-us

 

I'm not sure I follow? How do they not fit flush on the rear? Do you mean that they are 'pushed' by the lip of the lower bumper piece?

I have the Rokblokz (regular size) on my limited and they seem to be fine.

 

Hey all! I am Tylor, a customer service representative with Rokblokz. We have been actively searching for a Nightshade we can bring into our shop to create a solution for the lack of protection out there. Due to COVID-19, it has been rather challenging to find people willing to bring their ride to our shop. If anyone is local to Utah County, Utah, we'd be happy to give you a free set of flaps in exchange for you bringing your Nightshade to us for a fitment evaluation. Please either reach out in this forum, or you can always email me through the Rokblokz website.

I hope to have a solution for you all soon!

Thanks,

Tylor

 

Rokblokz Toyota 4Runner 5th Gen mud flaps do mount and look great, however there is a very slim gap that is hardly noticeable to some. These photos are on the 2020.

Tylor

 

I have a 2021 Nightshade, I still cannot find mud flaps and it's becoming very frustrating. Has anyone tried to modify the running board to make it half an inch shorter?

 

SmileyTye did you find ones or make ones yet for this?

 

+1

Hard to believe that they don't provide mud guards for your model.