What have you done to your 5th Gen 4Runner today?

Kustom54 lights with M BiLed 2 projectors.
The closeup pic shows dirt on the inside and scuff marks along the top inside of the lights. good news is they are making me a new set! Great customer service!
Lights are not dialed in..I set them low until I can laser align them

 

Look at the back glass

it may not be as big of a thing as it was on the Tacoma threads

 

The big brown truck dropped off some goodies!

TRD pro wheels and grille

 

Got some new BFG's getting installed tomorrow. I guess I'll need to find a home for the one month old Nitto Terras off the Pro

 

They look good ForRun,
Better than the other ones you had?

 

Putting 285’s on?

 

As far as looks I liked the Anso's.. the lighting was very good for a 500 buck set of headlights.
These? They do the best "blackout" look witch was my goal. the icing on the cake is the projector. Picture does not do them justice. The output is just as reviews said. Best on the market for 2020 projector. For $450 and talent you can put them in the stock runner. Just need to bake the headlights open

 

no, 275/70/17 load E. We had these on our 18 Pro and loved them. Perfect for Montana winters.

 

Sounds good!!

 

Welcome, what type of tint did you get? Was the price of reasonable? Thanks

 

Nothing special...just a much-needed wash and quick spray polish. 60 minutes to wash, 6 seconds before it's dusty again!

 

Follow up pic of my detailing on my AG Pro. Taking a break from it today. Just have the driver side to do yet with the correcting cream. After that on to the ceramic spray. I will pick back up tomorrow on it.

 

Hmmm. That’s strange. The TPMS is supposed to trip when the tire is lower than 25% of mnfctr’s tire pressure on door placard. So 75% of 32 is 24 PSI. 28PSI shouldn’t trip it.

 

I did some off roading today. No pics unfortunately since I was driving, and there weren't really any good places to pull over to get out and take pics, but I did it, and it was wild! And my truck survived

 

That’s funny dude!! I use to do them on the side years ago. No time now with my job and have 4 vehicles to take care of. Your tire all good?

 

Sounds good!!

 

Full detail and Ceramic coat
Added Anzo rear tails as well

 

I could read or ask... I am not @ home & curious. Does the horn honk like other cars when you get to the proper pressure? That would be really nice so I bet not...
Thanks!

 

I just got the light on the Corolla during the last cold snap. Both fronts were down to 25 psi. Aired them up all is good?

 

You never need to blur your plates, there's no point.

 

quick 30 minutes later

 

Found my favorite headlight. Its a retrofit LED projector and checked driving in a car and walking up the street. Absolutely does not blind people. The brights would be blinding. Knowing this I wont flash anyone, even idiots driving with brights on

 

You have to pull apart the whole housing for this?

 

Yeah it's a retrofit. I'm not talented enough to bake a headlight in an oven so bought them made by Kustom54

 

Is it projector for the high beam as well?

 

Yeah, it's high and low beam. The headlight oem high beam becomes a dummy light.
Not mine but heres some dude in a runner driving with the high beams on around 1:25 marker

 

After doing the Tacoma myself I am strongly considering doing the same to runner. Baking the headlights is easy it’s pulling them apart that is the nervous part lol. But the stock headlights on this truck fail miserably compared to my mori motos I had in the Tacoma.

 

Installed the nfab basket yesterday

 

Nice! This on my list of next upgrades. Looks really good.

 

Nice!

Did you install it a little bit higher up on the roof rails or is that the normal positioning?