What have you done to your 5th Gen 4Runner today?

did they have good wings?

 

New Blistein 6112 lift kit, caliraised rocksliders LINE-Xed. RCI skid plates, Toyota oem led dog lights, Trd rims with 275/70/17 BF all terrains. Trd catback exhaust, Trd intake, pedal commander and ceramic coat pro 9h.

 

Top Notch Hilo did the work they are the very best in Hawaii!!!

 

Started the long process washed it and clay bar yesterday. Trying some different detailing products from Griot’s with reviews being really good. Also finally picked up another buffer from them. Holds the 2 and 3 inch plate. Going with the correcting cream one step and using there ceramic spray. Doing 2 coats.

 

I’ve got the same plans

 

OOOOOOoooo.... AAAAAAaaaahhh.... Very nice!

If you haven't taken the front suspension apart on your vehicle before, take a look at @Crikeymike 's video on removing front struts. It'll save you loads of time! Saved me buckets!

Edit: The video shows a 2WD vehicle, but the process is the same. There's just an extra pair of axles in there.

 

I'm thinking even if the wings weren't too good that the breasts were great!

 

This kit from Diode Dynamics contains the resistors in the harness, correct?

 

Yes they do. If you watch the video very very easy to install. If I get a chance I will have to post a pic or video how bright they are. There are plenty of videos out. I changed because I don’t like how dark it is backing up the 4runner at night or anywhere.

 

Thanks everyone!! I’m anxious to try out this product from Griot’s. The nice thing I don’t need to rush doing it. This will take a couple of days because just doing a little at a time. I drive my other vehicle till I can get this done.

 

I did a similar process on my Taco. Unbolt the lower ball joint, but because my LCA bolts were seized, I instead disconnected the swaybar link. I could then push the spindle up and out of the way to drop the coilovers.

 

If you're interested in brighter reverse lights, check out the Gy6.35 HIR halogen bulb. It's brighter than any 921 LED bulb available.




https://www.tacomaworld.com/threads/gy6-35-hir-921-reverse-light-upgrade-vs-high-power-leds.474996/

I was interested in the tail/turn module too, but I didn't want to lose amber turn signals and reduce functionality (for example, with the tail as turn module you cannot show brake and hazard lights at the same time).

 

Good timing. I was backing out of the garage this morning and thinking to myself I need to research brighter reverse lights... Going to look into the Gy6.35 HIR halogens.

 

There's also this, if it ever comes up for production...



https://www.tacomaworld.com/threads/drop-in-baja-hitch-reverse-light.674339/

 

New to the 4Runner world. Traded my Calvary Blue Tacoma for a family hauler and couldn't be happier!
Just got the bronze wheels put on today so I figured I'd go play, just a little bit.

 

Looks like an SR5.

 

New to the forum. Just got my runner last week. However I put tint on today.

 

I misunderstood. I was also thinking of a previous discussion about this

They seem to roll out of the factory with the roof rack installed.

 

The plastic piece above the rear licence plate usually changes with trim level too. SR5 is color matched, OR is black (unpainted), and limited is chrome. Although that appears not to be the case with @Jabba's 4Runner. Don't know what logic Toyota uses lol

 

Just received my Bajadesigns 20 inch amber led bar today. It will be a while before I install that.

 

From what I have seen, SR5 comes with silver rails and black end caps, TRD comes with black/black and limited comes with silver/silver. That’s for the 2020 model year though.

 

https://www.amazon.com/gp/aw/d/B07TP6K55R?psc=1&ref=ppx_pop_mob_b_asin_title


this goes on the 4way and I ran the back up light into the 7way to be able to remove when I need to use hitch
Going out now to take pics will edit to show

 

Working on this now. Loving this Griot’s correction cream!! Going to take me a good while to get this done. I’m so dam fussy.

 

And my small buffer working awesome.

 

Had the fuel pump replaced under the recall. In another thread I made a comment about feeling as though the Runner is underpowered. After the replacement fuel pump, I would like to correct my statement. There is enough power to get up and go when needed.

 

Washed it, got new wheels, ordered my lift, trying to decide on sliders, then tire size.

 

Welcome from Northern Illinois!

 

Welcome from Northern Illinois!

 

You may like these lights. Brings out hidden things in paint you may never see

 

I don’t think I ever seen them ForRun. Do you do your own truck?