1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

New here with a few questions.

Discussion in '3rd Gen 4Runners (1996-2002)' started by Zombiedad78, Sep 12, 2020.

  1. Sep 12, 2020 at 6:41 AM
    #1
    Zombiedad78

    Zombiedad78 [OP] New Member

    Joined:
    Sep 12, 2020
    Member:
    #16665
    Messages:
    1
    Gender:
    Male
    Vehicle:
    98 black 4runner
    Hey everyone. New here but not new to 4runners. I got a cpl questions just to see if i am correct. So i just did a toyotec OME 3IN lift on my 98. I am needing to do the rear control arms upper and lower as my pinion angle is way off and i am not getting the full lift in the back. I know i can just take the lowers down and rotate the diff till it's at the right angle again and measure how much longer i need to make the control arms. Figured i would ask first before i set out to do this. Does anyone know how much longer the lowers need to be and if the uppers need to be shorten by how much?
     
  2. Sep 12, 2020 at 6:46 AM
    #2
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,855
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    Welcome to the forum.
     
  3. Sep 12, 2020 at 7:08 AM
    #3
    travelinscout

    travelinscout New Member

    Joined:
    Feb 18, 2020
    Member:
    #13203
    Messages:
    630
    Gender:
    Male
    Arizona
    Vehicle:
    2020 TRD ORP MGM
To Top