1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2010 Toyota 4 runner/ New here have some questions

Discussion in '5th Gen 4Runners (2010-2024)' started by Blair44, Aug 17, 2020.

  1. Aug 17, 2020 at 5:32 PM
    #1
    Blair44

    Blair44 [OP] New Member

    Joined:
    Aug 17, 2020
    Member:
    #16174
    Messages:
    1
    I purchased a set of tires from a discount tire shop. Was very pleased with the service n such. I was driving home and couldn't help but notice how loud the tires are after the instal. This will be the 3rd set I've had on it since I purchased it. I had never noticed it before. I did not want all terrain tires. I asked for street tires. I do not have a 4x4. So I saw no reason to put mud tires or all terrain tires on it since I mainly drive city. I also noticed after driving it about 3 mo or so that the noise would stop when I turned the wheel right going around curbs but wouldn't when turning left. I went back and had them rotate the tires and check for knots in the tires or belt separating from the tire wall. Or just a bad tire. They are fine. It really sounds as if the tires are rubbing the fender but I can't see it. Like they are to big for my vehicle. They assured me they weren't. My next step is to check the alignment. Even though it doesn't pull to either side. I drive this vehicle ALOT! Any advice or tips to point me in the right direction would be appreciated. Thanks in advance!
     
  2. Aug 17, 2020 at 6:12 PM
    #2
    Mtbpsych

    Mtbpsych New Member

    Joined:
    Dec 3, 2018
    Member:
    #7922
    Messages:
    1,886
    Gender:
    Male
    Vehicle:
    2018 SR5
    what kind of noise does it make? Rubber on pavement noise or other? You could have lose components banging around in there.
     
  3. Aug 17, 2020 at 8:23 PM
    #3
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,785
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    Maybe check the wheel bearings.
     
    mrmike7189 and JET4 like this.
  4. Aug 17, 2020 at 9:01 PM
    #4
    JET4

    JET4 Old Member

    Joined:
    Dec 20, 2018
    Member:
    #8147
    Messages:
    4,047
    Gender:
    Male
    Southeast, Va.
    sounds like it might be wheel bearings
     
    mrmike7189 likes this.

Products Discussed in

To Top