1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Cornfed 1" rear spacers and driver side lean?

Discussion in 'Suspension' started by sv102, Jul 30, 2020.

  1. Jul 30, 2020 at 5:32 PM
    #1
    sv102

    #1
    sv102 [OP] New Member

    Joined:
    Jul 23, 2019
    Member:
    #10664
    Messages:
    6
    Vehicle:
    2019 ORP
    Bilstein 5100s Cornfed 1” rear spacers
    I had a dealer install Bilstein 5100 on all four corners today (1.75" in the front) and 1" Cornfed spacers to the rear (stock coils). I noticed that the whole driver's side (front and back) has 0.5" lean. Is this supposed to happen with the Cornfed spacers. I thought that the driver side spacer was taller to compensate the lean? Or could it be that the dealer installed the spacers wrong way around?
     
    sv102, Jul 30, 2020
    #1
  2. Jul 30, 2020 at 7:58 PM
    #2
    Mtbpsych

    #2
    Mtbpsych New Member

    Joined:
    Dec 3, 2018
    Member:
    #7922
    Messages:
    1,886
    Gender:
    Male
    Vehicle:
    2018 SR5
    Common issue with the 4runners, when your gas tank is on the full side it’ll sag on the drivers side. It can be remedied by installing a .25” spacer on the front drivers side.
     
    Mtbpsych, Jul 30, 2020
    #2
    sv102[OP] likes this.
  3. Jul 30, 2020 at 8:18 PM
    #3
    ForRun

    #3
    ForRun 4Runner

    Joined:
    May 25, 2019
    Member:
    #10019
    Messages:
    3,044
    Gender:
    Male
    Vehicle:
    2020 orp
    Commonly discussed but did you ever try the gas thing? I did. Pulled into station near empty. No one in car. Measured all 4 corners and for those that know me I'm anal for accuracy. Filled the tank up and all 4 corners did not move so much as a 32nd. Nada, zip, zero
    This is with Eibach springs. Never tried it oem
     
    ForRun, Jul 30, 2020
    #3
  4. Jul 30, 2020 at 8:21 PM
    #4
    sv102

    #4
    sv102 [OP] New Member

    Joined:
    Jul 23, 2019
    Member:
    #10664
    Messages:
    6
    Vehicle:
    2019 ORP
    Bilstein 5100s Cornfed 1” rear spacers
    The tank is indeed almost full. I guess I’ll have to measure again once the tank is almost empty.
     
    sv102, Jul 30, 2020
    #4
Register FREE to Reply!

Products Discussed in

Eibach Pro-Truck Lift System
$826.47+
To Top