What have you done to your 5th Gen 4Runner today?

Yes 1ft by 5ft. 6in width for each side.

 

Thanks! Never knew about this stuff.

 

Makes sense. If you end up removing those bolts, post up if it works to gain access to that bulb...

 

Just installed this today... Quick and easy, fully plug and play In 10 minutes.

Went from cold charging voltage of 13.5 to cold charging at 14.5... hot charging from 13 to hot charging at 13.8 Even with my stereo system going, ac on blast, headlights on and all. No more 12.8-12.9 volts even at 2000rpm.

I'll really get to see what's possible once I get my 280 amp high output alternator installed.

Singer bypass voltage booster mod.

 

I've no idea how that works but sounds cool

 

Pretty neighborhood!

What part of the country are you in, if you don't mind sharing?

 

Thanks! I live in Newcastle WA, it's a suburb on the east side of Lake Washington, other side of Seattle.

 

Looks gorgeous!

 

You look gorgeous

 

That's what my girlfriend told me....

 

Hook 'Em Horns!

 

I took those 3 bolts out, no luck with removing the upper panel, I think there need to be a whole lot more to come out first before that panel can.
That bulb looks to be a special type, wouldn't have the LED equivalent to swap it anyways. I'll just leave it be, it probably requires a tool to extract, last thing I want to do is to break it from messing around LOL
Close up pics:

 

Stop it.

You're making me blush

 

You're probably going to need to drop the whole glove box to get to it. It's not terribly difficult (had to do it to wire up my remote starter) and you can find instructions here:

 

I'm stuck here also....

 

Installed LED kit today and I'm pretty happy with increased lighting. Holding off on installing the puddle LED's until I get the blacked out mirror turn signals.

 

Nice!

 

What kit did you end up going with?

 

Thanks for being a guinea pig, and attempting this. Looks like you're right, probably not worth the trouble. I think the sellers of LED bulb kits have no clue the glove box light won't take the same type of bulb. I appreciate your willingness to look into this.

 

Added a little Ivan throwback things and installed crossbars

 

Hmmmmm I see your a longhorns fan huh?!?!?

 

Drove mine to the office where I've done absolutely nothing for the last 8 hours...

 

I went with the autogine kit.

$25 AUTOGINE 16 Piece White Interior LED Lights Kit for Toyota 4Runner 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 Super Bright 6000K Interior LED Light Bulbs Package + Install Tool

https://www.amazon.com/dp/B0834MQ2D1/ref=cm_sw_r_cp_apa_i_8wIgFbJT3056M

 

out of all the shit I’ve done, I still haven’t done this lol. Need to

 

FN FX Pro matte gunmetal wheels and Toyo AT3 tires are on! Love the new look, looks so bad ass even with stock suspension and standard 265 70R17 size.

 

Got the U-Haul trailer and loaded up the Willys. tomorrow into Sunday we'll be going 640 miles to my Son in North Carolina, the Willys is his now. Towing just the trailer (about 2,300 lbs) was fine. almost no rear sag and the Runner pulled it with no problem at all. It was all flat and only for about 6 miles. I took it for a short drive with the Willys on it and yeah, there's a noticeable difference in acceleration but it doesn't struggle by any means. We'll see how it does on the highway. Pretty good sag in the rear but it looks worse in the pic. The slope of the drive way adds to that too.

 

Back the jeep up so it’s more over the tandem axles on the trailer. It’ll put less weight on tongue of trailer and less sag on the runner.

 

Can't. The tires have to be against the stops in front of the trailer in order for the straps to go around the tires. The straps just make it around the 32's as is.

 

Are the CT mirrors heated like the Suma ones?

 

I thought of that but the top is in so-so condition and would probably rip apart from the wind. Thanks for the suggestion though. I don't want to take it off in case of rain