4TH GEN LIFTED PAGE

I was able to tuck it right to the left of the winch, just had to "make" a bracket to hold it there (drilled some holes in a piece of aluminum). Had to use it yesterday, worked well.

I have a steel skid up front and the fuel. Really concerned about the other low spots.

 

What size tires you running?

 

315/70/17 about half way through their life span. 1" body lift as well.

 

Oh man, you're my new best friend lol. What did you do to get those to fit OK? and what fender flares are those? Right now I am 285/70/17, I want exactly what you have.

 

The PO did all the hard work. He had Tacoma take off shocks with a spacer lift, body mount chop, SPC uca, and some fender trimming. They are the stock flares. I forget what rear springs he did.
And then I bought it and ripped it all out lol. But the fact he did all that work, had the wheel spacers already installed that I needed to run this Dual shock TC set up, made it a lot easier. I was still rubbing a good bit on compression so I added the BL and new bushings over a year ago. I still rub the dual shock support tube and the coilover reservoir at full lock but I have adjusted my turning habits.
To make them work you really need aftermarket UCAs, and an alignment tech that can think past the factory specs. Some of them either won't or just can't seem to grasp the concept of +3.5 to +5 caster to move the whole assembly forward away from the rear of the fender well. But that's what gets you started, then BMC. You have the off road bumper so that allows the clearance for moving your caster forward without major fender trimming. You have wheel spacers to be able to run the LCAs right? That helps with turning radius with the bigger tires.

 

I got a super nice winch cover today also! I'm making a mesh grille atm also

 

If anyone would like to join in on wheeling and camping June 29-July 2nd in Colorado holler at me!!!! I'm coming from Wichita Kansas I have a group chat going on Facebook if you are interested or have ideas to contribute

 

Testing out the 285’s on the trails... had to do a little more cutting of the fender liner

 

Looking good! Good coverage with your lights too! Fender liners were meant to be abused lol.

 

thanks! Lol

 

Made a mesh grille for my long road trip ahead It's not perfect but it works lol

 

3rd Generation Tacoma coilover with 1/2" thick spacers up front.
Bilsteins B12 coils SKU 36-2817 rear.
275/70R17.
Center to fender.
Front 21-1/2"
Rear 22-1/2"

 

Looks good! Truck is clean and I like the 5th gen wheels!

 

Yeap, the good thing is that these wheels pull out 5/8" without spacers.

 

One of my buddies gave me a awesome Toyota mesh grille from his 2013 4runner and it fit I just had to trim like 2cm

 

Howdy from Texas, just purchased my new baby this week after about 7 years of looking. I believe she is on a 2.5 supreme leveling kit and is running 34s? I'm not sure as I am new to lift kits and everything else that has to do with modding. But I absolutely love the way it looks and it drives like a dream. I do think down the road I want to get some better shocks and maybe lift another .5in. Its probably going to be a while before I get to do much to her but she'll do for now. Oh she'll do just fine.
Going to a little spot tomorrow to see what kindof trouble I can get into and get some better shots

 

Looks good! I'm in KS it's nice to see some 4runner owners kinda near haha

 

Fun little outing doing some class VI roads in NH

 

Took her out for a little stretch sunday, sucked in a bunch of clay/mud into the radiator (now I know I need some splash guards!) so she got a little hot on the way home, but cleaned her out and topped off coolant and she's back to normal. Overall extremely happy with my new (to me) purchase. Didnt find anything she couldn't get over or through. I did however notice a little bit of grease from the front passenger CV but nothing major.

 

bottom left.. very easy to read. very TOYOTA

 

bottom left.. very easy to read. very TOYOTA

hi hi.. is the runner a daily driver or for fun only.. gas guzzler they are even stock like my '06 SR5

 

last weekend

 

Lift installed, rear sway bar links replaced, now I just need to adjust the front to level it out a bit... it’s come a long way since I first got it

 

Here's mine before I painted the fenders

 

That's sick

 

Hey guys! It's been a hot minute since I've posted! I took a trip to CO for 4 days of wheeling and camping. I tested my 2Runner on the rocks and did moderate trails. I learned alot about the capability and enjoying nature. I did breakdown going home to KS and my driver's side front wheel bearing decided to burn up on me. Luckily the yota fam is strong and saved the day. Now looking for a passenger side front wheel bearing and hub assembly has to be from a 2wd so if you know any junk yards that have one in your area let me know how much for it and shipping!

 

Cool photo of your runner!

 

You Guys Kick ASS!! Look at what we started!! Now we got a thread going with some cool pics too! Nice work everybody!! All of us have great looking Rigs!! God Bless AMERICA!!

 

Lovin the lift so far so much flex!

 

Had a cool trip in VT on some class IV roads.