TRD Pro wheels on SR5

New here, just got a 17 SR5 premium and looking to get some TRD Pro wheels. I dont need a lift or anything correct? Wont be gettting any huge tires or anything. Really just like the look. I assume I can just get them and even with the stock tires from TRD Pro shouldnt be an issue of even getting some falkens. Saw people talking about rubbing but since they are the same size I would assume not? Offset should be an issue either correct

 

Shouldn't be any problem at all..

 

No problem unless you lift and or go above 265/70/17 AT tire. These 4mm offset on the TRD wheel should be fine on stock tires.

 

Just swapped the SR5 wheels on my 2018 SR5 premium to the TRD pro wheels. It was a direct swap. Out the door at the local Toyota dealership for $730 wheels and labor to unmount and remount the tires.

 

Was that with new tires too or did you keep the old tires. Seems a bit low for a dealership damn

 

Kept original tires because they still have at least 20k miles left in them. I think our local dealership needed the service revenue, so they were willing to negotiate on the price of the wheels.

 

OEM Trd pro wheels with 265 70 17 ko2 here on my 2018 Sr5. They fit fine, zero rub ON stock suspension, and the now current bilstein TRD pro suspension.

 

Those TRD wheels are put on zillions of 2020's at the port. They fit just fine. Factory tires are 265/70/17's and there's tons of room all around, even at full lock.

 

Looks good. Especially with windows tinted

 

your missing a fang

 

I saw that as well... looks like the fog light housing too..?

 

Haha I know. Both actually. I installed the diode dynamics ss3 fog lights and need to find a flat area with a wall so I can adjust them, then tight the set screw and pop those bad boys back on. My wife has made fun of it quite a few times over the last few weeks

 

Yup , Mines white too. Going to get some wheels first, then tint. I have stock running boards but dont know what I want. Ill see what it looks like after. I do like those style ones and the predetor NFAB ones but as long as I have some ill be fine for a while

 

FWIW, just bought my wife a 2020 SR5P 2WD and immediately swapped out the stock wheels and Bridgestone Duelers for TRD wheels w/ stock size Falken Wildpeaks. They fit perfectly and make the vehicle look great, even on the stock suspension (though a small lift may be in order later). I just sold the stock wheels/tires yesterday for $600, which seems to be the going rate here in TX.

 

I do like the look of the TRD wheels with chrome lug nuts. Good contrast.

 

My SR5 with front Bilstein 5100 lift and rear stock. I just added Pro rim and stock P265 70 17 Hankook Dynapro AT3 tires.

 

Were you able to reuse the TPMS sensors and all that. I assume

 

Yep, reused the TPMS sensors