1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

98 Runner interior fuse box help

Discussion in '3rd Gen 4Runners (1996-2002)' started by Rallypoint_1, Dec 28, 2019.

  1. Dec 28, 2019 at 7:50 PM
    #1
    Rallypoint_1

    #1
    Rallypoint_1 [OP] New Member

    Joined:
    Dec 25, 2019
    Member:
    #12459
    Messages:
    13
    Gender:
    Male
    First Name:
    Bill
    Pasadena, California
    Vehicle:
    98’ Evergreen Pearl 4Runner
    4.56’s Yukon Grizzly locker(rear)
    I am about to install a Cobra 18 WX STII CB in my rig. The unit comes with 3 wires out the back. Constant power, ACC and ground. I can use an add-a-fuse for the Acc. That was easy to find. BUT...there is only 1 constant pwr in the interior fuse box. That’s the 7.5a fuse SRS air bag light. Bank #21.

    So here is the question. Would it be ok to tap into that SRS light for a constant pwr source? It would only be a 3a fuse. I can go straight to the battery but this would be easier.

    Thanks everyone!!
     
    Rallypoint_1, Dec 28, 2019
    #1
Register FREE to Reply!
To Top