Install Work in the San Francisco Bay Area / NorCal

Install Work in the San Francisco Bay Area / NorCal

I've been doing installs for friends and referrals for a few years now. 4runner/Tacoma/FJ Cruiser/Tundra/Sequoia I've recently acquired some garage space which allows me to do more work and more efficiently. So I'm going to open myself up to do more installs for anyone who needs it.


What sets me apart from your average local install shops is I put much more care and attention to detail on the install. I always do every install as if it's my own truck and always stand by my work.

Tundras.com link
https://www.tundras.com/threads/install-work-in-the-san-francisco-bay-area-norcal.43905/


Services

Suspension Installs - Shocks, UCA's, Leaf Springs, Spacers, etc.

Electrical Installs - SwitchPros, Air Compressors, Lights, etc.

Armor Installs - Sliders, Skid Plates, Bumpers

Detailing - Polish, Compound, Wax/Sealant etc.

Shoot me a PM if you have any questions/prices

Here is some of the work I've done.
5th gen 4runner Toytec 5100/ARB dual comp/SwitchPro


3rd Gen Icon Stage 1 kit with OME rear springs


Sequoia Icon 2.5 coilovers/ Rear air to spring conversion


Tundra 2.5 Kings suspension/ TC UCA


Tundra Icon 3.0 coilover/Omega rear bypasses/ RXT multirate leaf pack/ Hydraulic bumps

 

Bump!
Where are all the 4runner guys at?!

 

Just my 2 cents. Take it with a grain of salt. You have been a member since November 2019. But only 2 posts. I understand not living on here, but you don't seem to help out the community. I understand the knowledge is worth something, but if the members see you willing to help and add advice maybe willing to shop with you. Also the old saying "out of sight out of mind".

 

Thanks for the feedback David!
I’ll do my best to be more active on here. For anyone weary bc of my post counts and length of membership, look me up. For anyone who needs help shoot me a message.

@Bob and all the moderators has a good thing going putting together some great forums together!!

 

Some recent work I just finished up
3rd gen Tacoma cab mount chop/kings w/adjusters all around/Deaver leaf packs





tundra trd pro coachbuilder kit


Tundra 6112/5160


Tundra ARB twin mount

 

Looks like very good work. If I was in your area I'd be all over your offer.

 

Thanks Gary!

 

Hey Mark, where in the Bay Are you? I'm looking at putting some bilsteins on all around this summer for a little added lift.

PM me for estimate of your costs and location please.

 

PM’d!

 

5th gen runner in today for
Cab mount chop supplied with relentless plates
Suspension maintanence/inspection
Rad rubbers

 

Just wrapped up this runner!
Switch pro 9100 w/power trays mount/sdhq console mount
Hefty Fabworks bumper/skids
Baja Design light bar/fogs
KC cyclones

 

@dwagnersj
Warn winch bumper and rci engine skid

 

I think you are what the Bay Area been lacking and what I’ve been searching for. You’re probably in the South Bay since you have the 408 in your username. Can I get a quote for installing sliders on 3rd gen 4runner.

 

Thank you Steven! Shoot me a message with some details!

 

Some updates! Few trucks wrapped up!
@dwagnersj
Bud built sliders
Bmc
Pinch weld



Tacoma
dobinson MRR kit
Bmc/pinch welds
Hammer hangers
Dobinson hd leaf pack
Extended studs dirt king uca
Marlin crawler cam tab gussets
U bolt flip kit with air bag cradle




Tundra
Bmc
6112/5160
Toytec shackle

 

This thread needs some updates!
PM’d everyone that reached out to me. So sorry for late replies, I had my notifications off for this forum.

FJ bmc/pinch weld/ fox dsc kit/Eibach rear springs




Fresh off the lot 5th gen runner king kit/toytec rear springs/Spc uca/lower link arms/ivd pan hard bar/trd air box/arb breather/rci skids/rci sliders/Baja design fog pockets






taco bmc/pinch weld/archive hammer hanger kit



3rd gen Tacoma cab mount relocation kit

 

*edit* didn’t realize he already uploaded these pictures. Lol.

Mark is a solid dude, he did my “return to stock” on my old 4runner and installed all my suspension on my new 4runner, installed all my armor and some engine and light stuff as well. Marks quality of work is top knotch. He treated my vehicle like his own and returned it To me with no scratches, dings or scuffs. (I’ve had horrible experiences with vehicle damage in the past with other shops. So this is important to me). If you’re in the bay or surrounding area I’d hit him up.

 

Thanks brotha!

 

Can I get you contact info? I would like to get a cab mount chop done.
Steve
leese7861@gmail.com
408 234-1558

 

Hey there Mark,

I'm looking to get my recently purchased Westcott Preload Collar Lift Kit installed, what's your going rate (out the door) for getting that installed? Thanks!

 

Messaged ya!!

 

Sent ya a text Steve!

 

Thank you Mark for working on my 4runner today. Came out great. Exceeded what I imagined what it would look like. Clean work station, he even neatly packed up all my factory components. I am really enjoying my truck so much more now. Thanks again. Oh what was done to my 4runner is a body mount chop, pinch grind, suspension install, fender liner relocation. Thanks again Mark for the great job you did on my truck!

 

Mark has been helpful to the community over on Tacomaworld. In fact, he helped me out with my Tacoma. Took care of a switch pro install, and some bump stops. Would not hesitate to recommend him for install work.

 

Thanks brotha!!!

 

@dcsleeper408 can I get a quote for a UCA install? Where are you located?

 

Pm incoming.

 

@dcsleeper408 I have a few questions and also looking for a quote. Pls send a pm when you get a chance. Thanks!

 

Thank you @dcsleeper408 for your help today getting the cab mount chop done and getting the rack onto the roof-I would not have been able to do that myself.

 

Good job and great pixs of your work...
Big fan on Toytec and there Coilovers lift kit.
Straight forward installation and solid lift.. No issues at all.