1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

another lift question

Discussion in '3rd Gen 4Runners (1996-2002)' started by tuby4, Nov 12, 2019.

  1. Nov 12, 2019 at 11:29 PM
    #1
    tuby4

    #1
    tuby4 [OP] New Member

    Joined:
    Apr 8, 2019
    Member:
    #9457
    Messages:
    5
    Gender:
    Male
    Vehicle:
    2004 4Runner v6 4wd
    Building...
    hi all. my bro has a 3rd gen and wanting to lift it since its over 200k miles on original shocks/springs. I have a 4th gen that I lifted myself with jba high caster, wheelers t1/t12 springs on 5100's with fronts on the second perch, it has a slight rake and rides pretty good imo.

    we will probably do a suspension upgrade (upper/lower bj, tie rods, sway links) except for uca/lca to stay in his budget. for his application, I was thinking of the following since he will be taking it on hunting/fishing/camping trips for the added weight but most of the time will be empty and daily driven....please chime in on thoughts or other recommendations:

    1. bilstein 5100 all around and front at the lowest perch
    2. front- wheelers t1 springs (made by eibach) 620lb rating stated should add up to 3" lift
    3. rear- OME 906 should add 2"

    thanks.
     
    tuby4, Nov 12, 2019
    #1
    SlvrSlug and WallyT4R like this.
Register FREE to Reply!
To Top