What have you done to your 5th Gen 4Runner today?

A level says otherwise on perfectly level ground... I guess some people see what they want to see. I'd have to be pretty obsessive to care at this point. Which im not.


As long as YOU are happy with your set up thats GREAT...

 

Replaced my front sway bar bushings at the frame with these:



Fit was great, install was easy, ride is 100x better and no more clunk/rattle under the truck. Will be curious to see how the poly holds up vs the OE rubber, but for significantly less money, it’ll probably be worth it.

 

https://www.energysuspensionparts.com/category/toyota_4runner
These are what I use. I love them. Not sure why they stop @ 2015 when I believe they are still the same.
Anyone else need bushings yet?

 

Nice, I wanted to be able to grease them easily!

 

Rigid D2 diffused amber fogs installed!

 

Makes no difference. Top hat is exactly the same between the pro and non pro. These will fit and work just fine no matter what model you have.

 

looks Nice. Can you post a night output shot if you find time?

 

Yes, gonna be hard to see because I can’t turn them on independently of the headlights though...

 

Yes they do however the top hat is identical. These are designed to level the pro that's why they are only a 3/4" lift. Fact remains they will offer 3/4" lift on any model 4Runner Yes they do have a 1" spacer for other models and that will also work on the Pro. I have crossed these many times, they all work fine. You can't however use the preload spacer made for the non pro model under the pro with Bilstein suspension due to different coil sizes.

 

Hahahaha stupid complex vs my Tacoma and tundra... don’t think I’ll be doing it hahaha

 

Thanks for the info. I don’t mind the wheels but when it comes time to replace tires I may have to look into the black trd 17s depending on costs.

 

If you like the TRD wheels, do yourself a favor and look at the FN Wheels FX Pro. Better wheel is all aspects and they come in multiple colors. They are special order, not advertised online. You have to call Dustin at FN Wheels to order them.

 

May have to look into it but I also have to get the wife to agree, the Runner is mainly hers but I know she loves the black with the red trd center caps. It’s 2wd but I may look into getting a 4wd one down the road for me.

 

I am running the FX Pro wheels in dark gloss gunmetal. You can get them in matte black and you can add the red TRD stickers to the center caps. OEM TRD wheels are 17x7 FX Pro wheels are 17x8 The FX Pro wheel also has a little less back spacing which is ideal for bigger tires.

 

Im with you there! Id like to be able to run just the fogs and DRLs, or just the fogs by themselves during the day... But not enough to go through all that.

Jumper in the fuse box for what? I have had a few different 3rd gens, and i never did any mod for the fog lights but could still turn on just the fog lights and the DRLs, without the low beams on too...

These show just the fog lights and DRL on..


And a few pics of my past 3rd gens...

The first one was a 2016 SR, 4cyl... Totaled 3 weeks after i got it, before i made the first payment, due to a young lady not paying attention and turning into oncoming traffic...


2nd was a 2016 SR5 6cyl 2WD, that i had all of 3 days before the dealership called trying to change the agreed upon monthly payments, i returned it with 250 miles on it, then they tried to tell me i could keep it as agreed, but i was pissed at them for going back on their word so i said hell no and went to another dealership...


Third was also a 2016 SR5 6cyl 2WD, kept it for a year then traded it, as i really wanted a 4WD all along...


And 4th and final one was a 2017 SR5 6cyl 4X4, kept it about 2 years, until a couple months ago when i traded it for my 4runner...




I didnt have any issues with ANY of them. All ran good, no transmission issues, loved the trucks... But i figured after than many in such a short time maybe it wasnt meant to be LOL Plus i was ready for a change. Im super happy with the trade for the 4runner... Miss the truck bed but only occasionally. Like when i want to take my kayak out, or haul trash to the dump...

 

Weird... None of mine needed the low beams on to use the fogs. Maybe because they were Sr5 NOT trd.. maybe they changed it in 2016.... Maybe due to the region... I dont know... But i know i never did anything to make it work that way.

 

Had a 2012 sr5 tacoma. It required a jumper to allow for fogs to be on without the low beams.

 

I have 5'x10' truck bed on demand when needed for the 4...some people call it a utility trailer.

 

I got a trailer. One for kayaks and another utility trailer... And my boat trailer as well... But they're not as convenient as just tossing something in the bed.

One place I love going kayak fishing there's no boat ramp, not much room to park, and while I can get a trailer down there it's a bit of a pain in the ass.

But I'm also not throwing my kayak on the 4R roof. My kayak weighs over 100 pounds all set up. It has battery, fish finder, rudder setup, anchor setup, rod holders etc... Not something I wanna car top by myself.


I plan on eventually buying an old beater truck just for these things... An old Toyota would be nice.

 

Swapped out the door lights with JDM ASTAR LED's. Super easy to do!

Also hit the beach Sunday/Monday for fishing.

 

I had the 1/4 Headstrong spacer plate (1/2 of lift) and they worked great with zero problems for 31k. And I towed a decent amount and did a lot of city driving. Also I was under the impression that if I went with a larger spacer it would require longer studs to be pressed into the top plate...you may want to look into that. And because of that I went with the 1/4 ones. I now have the Eibachs which made my SR5 ride much nicer with less body roll. But I was very happy with the spacer and that 1/2 to 1 inch lift makes the 4Runner look much better.

 

Switched out the Rear Hatch assist Strap.





Hit Four one’s on the OD.

 

You'll be happy and they make a great product. As for the snap ring, it's a non issue. The lower shock shaft will fold and snap off before that snap ring fails. Bilstein uses the same design and has for many years. I haven't seen any failures due to the snap ring.

 

The 2010-13 4Runners are the best looking 4Runners ever produced IMO. Nice ride!

 

I love the face-lift 5th gens, but the OG Trails are my favorite!

 

Thanks @WallyT4R !!

 

SAWEET.! Can't wait to see

 

Bulletproof might nake one for it. They make a 12 inch drop bracket for the tundra and tacoma

 

Got my body mount chop, fender liner mod, and some of the plastic bumper trimmed today.


Now I could do donuts, full lock, in reverse and still no rubbing.

 

I saw this on the way home. Looked pretty good!
C4 rear bumper, looked like a pilfrey front, prinsu rack