1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Feb 28, 2025 at 4:45 PM
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    1,019
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    AT3W 275/70R17 Westcott Sliders Gobi no rise
    If I didn’t plan on keeping it forever I wouldn’t care about using it as a commuter.
    Besides, my wife is getting a Lexus RX so I’ll be using her hybrid Elantra for commutes. I’d rather put “useless” miles on that than the 4R. Also the savings on gas (60 vs 18 mpg) means more goodies I can buy for the 4R.


    PS: don’t get me wrong, I’ll definitely grab the 4R once in a while to run errands even though I can take something else but I would have withdrawals if I didn’t drive it at all for more than a week
     
    Last edited: Feb 28, 2025 at 6:01 PM
    icebear and Lucky9924 like this.
  2. Feb 28, 2025 at 5:12 PM
    3JOH22A

    3JOH22A トヨタ純正男娼

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,684
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    Thacrow and TrailSpecial22 like this.
  3. Feb 28, 2025 at 5:15 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    2,047
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
  4. Feb 28, 2025 at 5:29 PM
    3JOH22A

    3JOH22A トヨタ純正男娼

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,684
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
  5. Feb 28, 2025 at 5:36 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    2,047
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
  6. Feb 28, 2025 at 5:51 PM
    3JOH22A

    3JOH22A トヨタ純正男娼

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,684
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    ^H9 bulb requires modification to fit - trimming steel tab on the bulb base and cutting off one of the electrical connector keys, as I documented two years ago: https://www.4runners.com/posts/422216/
     
  7. Feb 28, 2025 at 5:55 PM
    Lucky9924

    Lucky9924 New Member

    Joined:
    Sep 17, 2024
    Member:
    #42865
    Messages:
    540
    Gender:
    Female
    California
    Vehicle:
    1999 and 2024 TRD ORP
    And my daily driver sedan died today. Transmission went out. I don’t want to deal with the repairs. RIP Nissan Altima, 2013-2025, 206k miles.

    So the new 4R is now my daily driver.
     
  8. Feb 28, 2025 at 5:59 PM
    scottiezilla

    scottiezilla New Member

    Joined:
    Feb 18, 2021
    Member:
    #19839
    Messages:
    415
    Gender:
    Male
    By far one of the most in depths threads I’ve ever seen…remember the 1st time I saw it for reference n thought “where was THIS GUY when they made the 5th gen’s…”

    I recently just replaced my h9 mod with the the silverseries? cause it was the o my one’s available {Like one above what @3JOH22A bought(baseline)} n maybe it’s a bit brighterish?

    looking to do the bi hi led? mod soon
    Found a decent looking knockoff OEM set with a good warranty, buy the one members harness, set
     
  9. Feb 28, 2025 at 6:42 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,054
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    I’ve rocked the no rear bumper on a couple occasions (not a spare tire too though). My wife was horrified to drive it. I kinda liked it. Reminds me a bit of the 1st/2nd gen runners you see with no rear “bumper”.

    I feel for you tho, that’s gotta be gutting.
     
  10. Feb 28, 2025 at 6:49 PM
    RedRunner87

    RedRunner87 Mall Crawler LVL Expert

    Joined:
    Feb 18, 2016
    Member:
    #1586
    Messages:
    1,039
    Gender:
    Male
    First Name:
    Vince
    The Springs, CO
    Vehicle:
    16 4Runner SR5
    After the fact, I was in my office when it all went down. Witnessed it afterwards via surveillance camera and it made me sad.

    Should have my normal tire back on tomorrow after it gets patched. It doesn't look horrible with no bumper, gonna see if I can find a body shop that will swing high clearance bumper. Ironically, I do have a Barcelona Red bumper cover in my side yard that I was going to use for a high clearance bumper anyway. Hopefully that helps with getting a high clearance bumper lol.
     
  11. Feb 28, 2025 at 6:55 PM
    94hokie

    94hokie New Member

    Joined:
    Mar 22, 2024
    Member:
    #39296
    Messages:
    250
    Gender:
    Male
    Vehicle:
    23 TRD ORP Lunar Rock
    On my way out of town for the weekend I had my new favorite shop Apex Overland install my RCI steel gas tank skid. I know, I know, no picture but it did actually happen.
     
    BS67 likes this.
  12. Feb 28, 2025 at 7:16 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,054
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  13. Feb 28, 2025 at 9:08 PM
    4runningMan

    4runningMan New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,779
    New Mexico
    I actually prefer the H9 mod to the OEM LED's. Kinda by a lot.
     
  14. Feb 28, 2025 at 9:13 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,054
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Made it to Marks Work Wearhouse in the runner just before closing w/ a $100 GC towards original straight Levi’s and a dope Helly Hansen sweater.

    Now stopped to buy the wife’s cake mix for my son’s 4th bday party tmro!

    IMG_1908.jpg
    IMG_1911.jpg

    IMG_1915.jpg
     
    playdixie and TrailSpecial22 like this.
  15. Feb 28, 2025 at 9:18 PM
    freak4life

    freak4life New Member

    Joined:
    Feb 22, 2020
    Member:
    #13248
    Messages:
    331
    Gender:
    Male
    First Name:
    Rich
    Cañon City Co
    Vehicle:
    2018 off-road
    Fuel Wheels, KO2 33’s RCI skids (alum. full length) Jomax ABS protection SSO low profile w/ Warn Zeon 10s Westcott: sliders, roof rack, ladder, Hitch mount rear tire carrier Nitro 4:88 regear LRA 24gal aux tank Icon he rear springs Treaty Oak spacers Viper security Upgraded stereo, speakers, 400 amp unit Goose gear 100% rear seat delete Dometic DZ95 RedArc man.30 2 Battleborn 100ah lithium Genesis Duel battery under hood ARB duel air under hood Baja 30’ amber and fog Rigid 40” light bar on roof, ditch lights Switch-pro
    What?
    Pasted?
    Hear?
     
  16. Feb 28, 2025 at 9:48 PM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    601
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    You misspelled "Supercenter." :p

    (And yes. I know it's UK spelling.)
     
  17. Feb 28, 2025 at 10:34 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,054
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    I know, spelling Canadian words with “re” is dumb - I thought it was cuz of the French, I blame French Canadians
     
    playdixie[QUOTED] likes this.
  18. Mar 1, 2025 at 12:51 AM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    601
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    DfTXRsiUwAASVLg.jpg

    (I haven't seen this movie in ages tbh. And I still get a chuckle outta watching it. Much like the Beavis and Butthead movie from long ago.)
     

Products Discussed in

To Top