1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Oct 27, 2024 at 7:38 AM
    CoFlyFishing

    CoFlyFishing New Member

    Joined:
    Sep 22, 2024
    Member:
    #42973
    Messages:
    5
    Gender:
    Male
    Vehicle:
    2024 ORP
    Stock didn’t last long for me. I added the 6112/5160 setup, removed the steps, and upgraded the tires. I think I’ll grab some RCI sliders this week and call it good for a while.

    12CAAF8B-0ABE-45C9-8256-A74BC834753D-COLLAGE.jpg
     
    Dabigono, ColeRunner, nimby and 11 others like this.
  2. Oct 27, 2024 at 9:28 AM
    Noodles

    Noodles New Member

    Joined:
    Apr 9, 2024
    Member:
    #39721
    Messages:
    408
    I remember someone here saying they only used 1 can of Waxoyl, but for this job, I ended up needing nearly all 3. I used the 360 nozzle to fill the frame through the holes, making sure it got a thorough coating from every angle. I removed the skid plate and the spare tire of course.
    I picked up a disposable coveralls at Lowe’s and a plastic eye pro. The whole process was about 1.5 hours. One more observation: this is not dripping like the fluid film. The photos speak for themselves. There is zero stain on the ground and not because I’m a pro.

    IMG_0068.jpg
    IMG_0076.jpg
    IMG_0073.jpg
     
    Last edited: Oct 29, 2024
  3. Oct 27, 2024 at 11:15 AM
    BS67

    BS67 New Member

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    5,506
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    Drove the SR5 to church this morning then a few groceries before driving home!
     
    captrussia253, djwantke and JET4 like this.
  4. Oct 27, 2024 at 1:56 PM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,539
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....
    Did you pray for all the sinners on this site? We need all the help we can get! :)
     
  5. Oct 27, 2024 at 2:09 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,492
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    walked down the road found my 4R appears to have its fog light pushed inward and broke some tabs. That’s what I get for parking it outside in favour of the wife’s jeep.
    no actually, it coulda been from the stick a car spit out at me driving during storm.

    short of searching YouTube, anyone know what to do?
    been trying to pop er in without busting more, no luck…the ugly viper cut helps :rolleyes:

    IMG_7089.jpg
    IMG_7090.jpg
    IMG_7093.png

    IMG_7094.jpg
     
    ColeRunner and captrussia253 like this.
  6. Oct 27, 2024 at 2:49 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,492
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    wand wash, din use their brush.

    IMG_7099.jpg
    IMG_7103.jpg
     
  7. Oct 27, 2024 at 3:41 PM
    acet7

    acet7 New Member

    Joined:
    Feb 6, 2021
    Member:
    #19584
    Messages:
    80
    Gender:
    Male
    First Name:
    John
    Vehicle:
    2021 Dark Grey TRD Off-Road 4Runner
    So after two hurricanes I finally got to do some something fun with my truck today. If you have a Victory side molle panel you need to talk with @Photon_Chaser as he is a master engineer and awesome with a 3D printer. I had reached out to Victory about making a a different bracket for me so that I could utilized my cargo cover and they said NO. So @Photon_Chaser was able to hook me up with one of his homemade brackets to make this work for me (any questions on this please contact him directly). I also like saving all of the bags that tools come in, so this one shown has mostly my tire kit in it (hose, gauge, plug kit, adapters) The thing with the yellow is one of those batter jump starters. Its a work in progress and I will see how I like how I mounted everything after awhile. Also awhile back I had asked if anyone had figured out a way to mount ALICE clips to a molle panel. In looking at all my stuff I came across this green adapter that I already had and forgot about. The NSN number shown in case you want to find one yourself.

    IMG_20241027_094833798.jpg
    IMG_20241027_095438691_HDR.jpg
    IMG_20241027_095714405_HDR.jpg
    IMG_20241027_095520671_HDR.jpg
    IMG_20241027_114657939_HDR.jpg
    IMG_20241027_114711982_HDR.jpg
    IMG_20241027_114823973_HDR.jpg
     
  8. Oct 27, 2024 at 3:50 PM
    BS67

    BS67 New Member

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    5,506
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    I sure did!..........In fact, you were top of the list!!!
     
    glwood54, captrussia253 and playdixie like this.
  9. Oct 27, 2024 at 4:12 PM
    raimieb

    raimieb Hobby Mechanic - Love Our 4Runner!

    Joined:
    May 16, 2022
    Member:
    #27095
    Messages:
    806
    Gender:
    Male
    First Name:
    raimie
    Vehicle:
    2021 ORP 4x4
    Lots…
    JBweld.
     
  10. Oct 27, 2024 at 4:22 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,492
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    what jb weld reference are you making buddy?
    I jb welded my exhaust tip on after cutting the tip off w/ a 12V sawzall
     
  11. Oct 27, 2024 at 5:10 PM
    LetsTacoboutit

    LetsTacoboutit New Member

    Joined:
    Feb 20, 2016
    Member:
    #1594
    Messages:
    90
    Gender:
    Male
    First Name:
    Adobe
    Vehicle:
    16 TRD Pro - Rat Patrol Edition
    Added baby seat behind steering wheel

    Hmmm...I would mount that hefty blunt object somewheres else other than behind driver's or passenger's head.
     
  12. Oct 27, 2024 at 5:18 PM
    acet7

    acet7 New Member

    Joined:
    Feb 6, 2021
    Member:
    #19584
    Messages:
    80
    Gender:
    Male
    First Name:
    John
    Vehicle:
    2021 Dark Grey TRD Off-Road 4Runner
    I will throw another strap on it :) I totally forgot I bought these for the axe lol, been in a brain fog lately (hurricane brain sort of like baby brain).

    61niiVbxsEL._AC_SL1200_.jpg
     
    Last edited: Oct 28, 2024
  13. Oct 27, 2024 at 5:41 PM
    Stoney Ranger

    Stoney Ranger New Member

    Joined:
    Mar 19, 2021
    Member:
    #20419
    Messages:
    1,024
    Gender:
    Male
    Driftless Area
    Vehicle:
    '18 SR5 Nauti Blue
    4x Rockers/Skids-Dobi-275's-Fr/R Bpr-Winch-Stickers-ALF
    If you Sawzall 3 panel columns, you can fit your hand behind it for a bit of storage.

    1730075774817700103967565773854.jpg

    I like having the fire extinguisher down low.

    17300759479307314002034952757792.jpg
     
    Last edited: Oct 27, 2024
  14. Oct 27, 2024 at 6:11 PM
    vthoky

    vthoky New Member

    Joined:
    Aug 6, 2024
    Member:
    #42053
    Messages:
    243
    Gender:
    Male
    Virginia
    Vehicle:
    2024 TRD ORP
    Trailer connector relocate, tint, work lights, Pro wheels.
    Wow. I like that a lot.
    I've considered the side molle panel, but all I had seen so far precluded use of the cargo cover. This is encouraging!
    Thank you for posting it.
     
    acet7[QUOTED] likes this.
  15. Oct 27, 2024 at 7:00 PM
    Bagman

    Bagman Dental Floss Tycoon

    Joined:
    Feb 29, 2024
    Member:
    #38869
    Messages:
    222
    Gender:
    Male
    Georgia
    Vehicle:
    Barcelona Red Tacoma / MGM SR5 Premium 4Runner
    If you could replace the tabs, would that solve your problem?
    If so, if you have access to where the tabs would attach, use super glue and baking soda to re-attach the tabs. The glue and baking soda will cure hard as rocks and will probably be stronger than before. Has worked for me in similar situations.
     
  16. Oct 28, 2024 at 4:15 AM
    laxman09

    laxman09 Gassy Member

    Joined:
    Dec 7, 2023
    Member:
    #37129
    Messages:
    423
    Gender:
    Male
    Mahoning Valley, OHIO
    Changed the oil this weekend. WM didnt have the usual Supertech synthetic Ive been using, so went with Pennzoil Platinum instead.
     
    captrussia253 and Bagman like this.
  17. Oct 28, 2024 at 5:35 AM
    1SilverRunner

    1SilverRunner My boy, blue

    Joined:
    Jan 15, 2024
    Member:
    #37925
    Messages:
    1,208
    Gender:
    Male
    Tejas
    Vehicle:
    22 TRD Off Road Premium
    Front Bumper: C4 Fabrication Low-Profile Bumper Warn Evo10-S Winch w/ Warn wireless adapter Extreme LED dual color light bar w/ Cali raised LED OEM style switch Bumper Cover Trimmed For Clearance Rear Bumper: 80% Off Road Rear Bash Bar Armor: RCI Skid plate package C4 Gas tank skid RCI Rear diff skid RCI Shock Skids RSG Angled/ Plated Sliders Total Chaos Cam Tab Gussets Total Chaos Spindle Gussets 41.22 Hitch Slider Suspension: Dobinsons IMS long travel shocks: (Front: IMS59-50574 w/ C59-352 Springs) (Rear: IMS59-50575 w/ C59-675v Springs) Apex Chassis Tie Rod Assemblies (KIT410) Apache Off Road UCAs Apache Off Road HD Rear Links (Upper and Lower) Apache Off Road Rear Sway Bar Links Dobinsons Track Bar Front Sway Bar Delete DuroBumps Rear Bump stops PerryParts Front Bump stops DRKDSS Track Bar Correction kit Dobinsons Diff Drop Wheels/ Tires: RRW 17x8.5 -12 RR6-H Wheels 285/75/17 Falken A/T4W 1.25" SpiderTrax Spacers BMC, Pinch Weld Folded. C4 High Clearance Fender Liners Performance: OTT Tuned Scan Gauge II for Temp Monitoring Yota Shop Diff Breather Storage Solutions: LFD Cross-Bars Aiden James Customs Gear Plate w/ Slide Out Tables *Backordered. Rado Designs Molle storage panels and top shelf Glove Box organizer Center Console organizer Interior: Diode Dynamics LED Interior lighting (Warm white ftw) Meso Customs Hatch lights Meso Customs Door Handle Covers Ram ball mount for Garmin In-Touch Mini II FitCamX Dash Camera Scosche phone mount Weathertech floor matts Misc: Nano Ceramic Tint (Including windshield and sunroof) Midland MXT575 and Ghost Antenna Cali Raised LED 27W Ditch Lights OVS Nomadic 6.5' Awning AVS Low Profile Vent Visor AVS Bugflector II Diode Dynamic puddle lights LasFit Reverse lights LED license plate lights Ark Splash Guards Ark Mud Flap Deletes AJT Push-To-Start Button +Midland handheld GMRS radios, Baofeng UV-5R Ham radio, recovery gear, water purification system, lifeboat food rations, trauma kit, fire extinguisher and fire starting kit stay on board.
    Brake pads, oil change, fluid check and bolt check. Ready for some wheeling this weekend!
     
    icebear, captrussia253 and raimieb like this.
  18. Oct 28, 2024 at 7:01 AM
    raimieb

    raimieb Hobby Mechanic - Love Our 4Runner!

    Joined:
    May 16, 2022
    Member:
    #27095
    Messages:
    806
    Gender:
    Male
    First Name:
    raimie
    Vehicle:
    2021 ORP 4x4
    Lots…
    Oh, was for the guy who busted his plastic tabs on fog light ;)
     
    djwantke[QUOTED] likes this.
  19. Oct 28, 2024 at 8:00 AM
    Nick B

    Nick B New Member

    Joined:
    May 17, 2024
    Member:
    #40493
    Messages:
    325
    Gender:
    Male
    First Name:
    Nick
    SW Florida
    Vehicle:
    2010 TE, 2024 ORP
    Is that part of the fender liner hanging down in the pic ? Driver side .
     
  20. Oct 28, 2024 at 8:34 AM
    JET4

    JET4 Old Member

    Joined:
    Dec 20, 2018
    Member:
    #8147
    Messages:
    4,231
    Gender:
    Male
    Southeast, Va.
    Wife and I drove the 2011 to early vote today.
     
  21. Oct 28, 2024 at 9:22 AM
    Rocko9999

    Rocko9999 New Member

    Joined:
    Apr 21, 2023
    Member:
    #32488
    Messages:
    1,190
    Vehicle:
    2011 Limited
    Finished the Cosmoline 342 Black treatment. Note-I live in a low to moderate road salt area in the PNW. Nothing like back east where frames are totaled after a few years. That is the reason for not 100% coverage. I will re-evaluate the uncoated panels next year and see how they look. Also, anything going to be replaced soon was not coated-UCAs. A few tips-Get a full tyvek suit, actually get a couple. Any clothes that are sprayed will be ruined. Goggles, and a real respirator mask or exhaust fan. I only used a N95 and had a decent cross wind coming through my garage but after each session I had a headache. Use cheap painters tarps on the ground and 3-5' past the vehicle in each direction at a minimum. The smell is not bad-smells like coconut oil. The finished surface feels like a candle-somewhat waxy, but dry to the touch.

    IMG_9828 - Copy.jpg
    IMG_9863 - Copy.jpg
    IMG_9822 - Copy.jpg
     
  22. Oct 28, 2024 at 9:28 AM
    Rocko9999

    Rocko9999 New Member

    Joined:
    Apr 21, 2023
    Member:
    #32488
    Messages:
    1,190
    Vehicle:
    2011 Limited
    Replaced the liftgate window belt molding. It was falling apart. Part #68292-35041

    IMG_9883 - Copy.jpg
    IMG_9887 - Copy.jpg
    IMG_9891 - Copy.jpg
     

    Attached Files:

    JChiz, ColeRunner, icebear and 4 others like this.
  23. Oct 28, 2024 at 9:58 AM
    1SilverRunner

    1SilverRunner My boy, blue

    Joined:
    Jan 15, 2024
    Member:
    #37925
    Messages:
    1,208
    Gender:
    Male
    Tejas
    Vehicle:
    22 TRD Off Road Premium
    Front Bumper: C4 Fabrication Low-Profile Bumper Warn Evo10-S Winch w/ Warn wireless adapter Extreme LED dual color light bar w/ Cali raised LED OEM style switch Bumper Cover Trimmed For Clearance Rear Bumper: 80% Off Road Rear Bash Bar Armor: RCI Skid plate package C4 Gas tank skid RCI Rear diff skid RCI Shock Skids RSG Angled/ Plated Sliders Total Chaos Cam Tab Gussets Total Chaos Spindle Gussets 41.22 Hitch Slider Suspension: Dobinsons IMS long travel shocks: (Front: IMS59-50574 w/ C59-352 Springs) (Rear: IMS59-50575 w/ C59-675v Springs) Apex Chassis Tie Rod Assemblies (KIT410) Apache Off Road UCAs Apache Off Road HD Rear Links (Upper and Lower) Apache Off Road Rear Sway Bar Links Dobinsons Track Bar Front Sway Bar Delete DuroBumps Rear Bump stops PerryParts Front Bump stops DRKDSS Track Bar Correction kit Dobinsons Diff Drop Wheels/ Tires: RRW 17x8.5 -12 RR6-H Wheels 285/75/17 Falken A/T4W 1.25" SpiderTrax Spacers BMC, Pinch Weld Folded. C4 High Clearance Fender Liners Performance: OTT Tuned Scan Gauge II for Temp Monitoring Yota Shop Diff Breather Storage Solutions: LFD Cross-Bars Aiden James Customs Gear Plate w/ Slide Out Tables *Backordered. Rado Designs Molle storage panels and top shelf Glove Box organizer Center Console organizer Interior: Diode Dynamics LED Interior lighting (Warm white ftw) Meso Customs Hatch lights Meso Customs Door Handle Covers Ram ball mount for Garmin In-Touch Mini II FitCamX Dash Camera Scosche phone mount Weathertech floor matts Misc: Nano Ceramic Tint (Including windshield and sunroof) Midland MXT575 and Ghost Antenna Cali Raised LED 27W Ditch Lights OVS Nomadic 6.5' Awning AVS Low Profile Vent Visor AVS Bugflector II Diode Dynamic puddle lights LasFit Reverse lights LED license plate lights Ark Splash Guards Ark Mud Flap Deletes AJT Push-To-Start Button +Midland handheld GMRS radios, Baofeng UV-5R Ham radio, recovery gear, water purification system, lifeboat food rations, trauma kit, fire extinguisher and fire starting kit stay on board.
    I've used a cheap wood burning tool and black zip ties to plastic weld. Works pretty well. Afterward I'll reinforce the tabs with super glue or JB weld.
     
    raimieb likes this.
  24. Oct 28, 2024 at 10:32 AM
    captrussia253

    captrussia253 New Member

    Joined:
    Jul 5, 2020
    Member:
    #15320
    Messages:
    599
    Gender:
    Male
    First Name:
    Ruslan
    PNW
    Vehicle:
    2017 Tundra Platinum 2016 T4R SR5P
    Scored slightly used icon 2.5 coilovers for the wife’s 4runner.

    IMG_2244.jpg
     
  25. Oct 28, 2024 at 11:56 AM
    CoFlyFishing

    CoFlyFishing New Member

    Joined:
    Sep 22, 2024
    Member:
    #42973
    Messages:
    5
    Gender:
    Male
    Vehicle:
    2024 ORP
    Are you talking about the mud flap? That’s all I see, although it does rub a little so need to do some minor cutting soon.
     
  26. Oct 28, 2024 at 12:14 PM
    TheGreekFreak

    TheGreekFreak New Member

    Joined:
    Sep 21, 2023
    Member:
    #35784
    Messages:
    174
    Gender:
    Male
    MA
    Vehicle:
    '23 SO TRD Pro, '21 BB Civic Type R
    Finally had the Ruff Rug liner cut by an upholstery shop to fit around my Victory 4x4 drawers:

    IMG_1175.jpg

    Could have probably shifted it a bit more to the right to get rid of the part that comes up on the drawers but hasn’t bothered me enough…..yet.

    IMG_1172.jpg

    With the bumper cover attachment so my dog doesn’t scratch it up:

    IMG_1176.jpg

    Only wish the material wasn’t as wrinkled, might look for a way to smooth it out a bit more. But it’s pretty thick stuff, especially with the added comfort foam option.

    Otherwise, pretty happy with it as it should make protecting the interior and cleaning up after my dog much easier. Doesn’t move around at all after I added even more double sided velcro underneath.
     
    Last edited: Oct 28, 2024
  27. Oct 28, 2024 at 4:55 PM
    trl1990561

    trl1990561 New Member

    Joined:
    Dec 27, 2023
    Member:
    #37512
    Messages:
    65
    Gender:
    Male
    Jupiter, FL
    Vehicle:
    2024 TRD Pro Underground
    Did some rearranging on the truck today nothing special. Moved my shovel to the ladder from a window panel. Love it so far can't really see it in rear view and it's not on my back up cam. Moved to one rotopax on each window panel as when I had two on each it rattled something fierce.

    IMG_7809.jpg
    IMG_7811.jpg
    Unknown.jpg
     
  28. Oct 28, 2024 at 5:08 PM
    johnstapleton

    johnstapleton New Member

    Joined:
    Oct 28, 2024
    Member:
    #43619
    Messages:
    14
    I bought two 6 inch foam mattresses today. Usually just one person sleeps in the back but my wife is mentioning she would like to give it a shot since we saw some nice campground in the sierras that won’t fit our travel trailers. Tents are out of the question for her. I’ll see how it goes
     
    raimieb, Pentangler and 4 Sticks like this.
  29. Oct 28, 2024 at 8:24 PM
    NeverTooLate71

    NeverTooLate71 New Member

    Joined:
    Jun 13, 2024
    Member:
    #41063
    Messages:
    378
    Gender:
    Male
    First Name:
    Bob
    Vehicle:
    2024 4Runner SR5
    Touched up some minor scratches on the plastic nose of my 5 month old 4Runner. Amazing how little paint issues can catch your eye and bug the hell out of you
    until you address it with touch up paint. When I was much younger I used to be a detailer at a British Leyland Dealership (Jags, Jensen's, MG's) and that where I learned
    how to use touch up paint. I still have a pretty steady hand (when I don't drink too much the night before)
     
  30. Oct 29, 2024 at 7:26 AM
    Number16

    Number16 New Member

    Joined:
    Feb 24, 2023
    Member:
    #31434
    Messages:
    120
    Gender:
    Male
    Vehicle:
    2021 4runner
    Care to share any details for this. I have to touch up my 4Runner and my wife's BMW. Both are white. Thanks!
     

Products Discussed in

To Top