1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Apr 10, 2024 at 7:54 AM
    kojak

    kojak New Member

    Joined:
    Sep 19, 2023
    Member:
    #35749
    Messages:
    279
    Gender:
    Male
    Vehicle:
    21 SR5P 4x4
    How are you liking it so far?

    Me too, but I'm seems like they addressed quite a few little things that bug me about the 5th gen.

    If it's the PCS system fault, your options are

    1. Ignore it, and learn to live without cruise control
    2. Find a dealer to "recalibrate" it
    3. Buy a cable, install techstream and reset it yourself
     
  2. Apr 10, 2024 at 8:03 AM
    Brett Tech

    Brett Tech New Member

    Joined:
    Jul 17, 2022
    Member:
    #27842
    Messages:
    81
    Gender:
    Male
    First Name:
    Brett
    Vehicle:
    22' TRD PRO
    Magnuson Super Charger.
     
    kolter45 likes this.
  3. Apr 10, 2024 at 8:12 AM
    kojak

    kojak New Member

    Joined:
    Sep 19, 2023
    Member:
    #35749
    Messages:
    279
    Gender:
    Male
    Vehicle:
    21 SR5P 4x4
    PXL_20240410_142451232.jpg

    More chopping--replaced the passenger side 3rd row seat with an exorbitantly priced ARB roller drawer.

    PXL_20240410_142433348.jpg

    Also put the shelf back in to maximize storage space, which would have to come out to ever use the remaining 3rd row seat. I had to use it once while I was running the 2nd row passenger seat delete--it's tricky to get in from the driver's side but can be done.

    PXL_20240410_142427048.jpg

    2nd row fully reclined. My fridge is on the small side, so there's room for the battery too.
     
  4. Apr 10, 2024 at 9:02 AM
    Blue 4ever Runner

    Blue 4ever Runner New Member

    Joined:
    Aug 17, 2019
    Member:
    #10935
    Messages:
    668
    Gender:
    Male
    First Name:
    Jim
    Vehicle:
    2019 Blue 4Runner
    Blacked out badges, window deflectors, smoked 3rd brake light. I have a Borla muffler on order as well as some color matched engine cover stickers. I'll be painting the stock wheels soon as well. Falken tires in the fall as well.
  5. Apr 10, 2024 at 9:07 AM
    Blue 4ever Runner

    Blue 4ever Runner New Member

    Joined:
    Aug 17, 2019
    Member:
    #10935
    Messages:
    668
    Gender:
    Male
    First Name:
    Jim
    Vehicle:
    2019 Blue 4Runner
    Blacked out badges, window deflectors, smoked 3rd brake light. I have a Borla muffler on order as well as some color matched engine cover stickers. I'll be painting the stock wheels soon as well. Falken tires in the fall as well.
  6. Apr 10, 2024 at 9:20 AM
    hossler1788

    hossler1788 Turtle

    Joined:
    Dec 17, 2020
    Member:
    #18578
    Messages:
    2,117
    Gender:
    Male
    First Name:
    Joshua
    Central Pa
    Vehicle:
    2020 4runner
    So whats it sound like?
     
    kolter45 likes this.
  7. Apr 10, 2024 at 10:56 AM
    Geene519

    Geene519 New Member

    Joined:
    Dec 12, 2020
    Member:
    #18463
    Messages:
    15
    Gender:
    Male
    NJ
    Vehicle:
    2024 TRD ORP
    Added the black lower valance. Picked up a front and rear set locally for $50 and painted them myself.

    20240407_141521.jpg
     
  8. Apr 10, 2024 at 11:00 AM
    Rob41

    Rob41 Veteran

    Joined:
    Jun 23, 2023
    Member:
    #33566
    Messages:
    946
    Gender:
    Male
    First Name:
    Rob
    Northern Michigan
    Vehicle:
    2023 Supercharged 4Runner TRD
    Magnuson Supercharger, CSF Performance Radiator, Eibach Pro-Truck Series 2R suspension, SCS Ray10 Bronze Wheels, Pedal Monster, TRD Pro Grill, TRD Pro Roof Rack
    Looks good. Did you have that bull bar before the lift was installed?
     
  9. Apr 10, 2024 at 12:02 PM
    hossler1788

    hossler1788 Turtle

    Joined:
    Dec 17, 2020
    Member:
    #18578
    Messages:
    2,117
    Gender:
    Male
    First Name:
    Joshua
    Central Pa
    Vehicle:
    2020 4runner
     
  10. Apr 10, 2024 at 1:06 PM
    Texas-Gorilla

    Texas-Gorilla New Member

    Joined:
    Mar 29, 2024
    Member:
    #39467
    Messages:
    93
    Gender:
    Male
    Vehicle:
    2015 Toyota 4Runner SR5
    I've lifted other vehicles and not had issues with the tire sensors. Are you sure one didn't die or get damaged? Did you check the spare tire pressure?
     
  11. Apr 10, 2024 at 1:09 PM
    94hokie

    94hokie New Member

    Joined:
    Mar 22, 2024
    Member:
    #39296
    Messages:
    184
    Gender:
    Male
    Vehicle:
    23 TRD ORP Lunar Rock
    1.5” rear with 2.7” front lift for me and no Christmas tree lights. Hope you get it sorted, dash warning lights make me crazy.
     
  12. Apr 10, 2024 at 1:23 PM
    Marchy

    Marchy New Member

    Joined:
    Mar 5, 2021
    Member:
    #20124
    Messages:
    215
    Gender:
    Male
    First Name:
    Sean
    Seattle
    Vehicle:
    2021 4 Runner Venture
    Installed my new smoked Morimoto tails, the stock driver side tail was a PITA to remove, passenger side easy peasy. I was never a fan of the stock tails, but didn't care for any of the aftermarket ones until these ones were released. I love their look and how they function!

    AP1GczPWoJmfrjKq-Jx0c1ze_Boob7JG30ihRM1K_d8fbec3cb40b6c77e086a6abe101e55854ba134f.jpg

    AP1GczPIR3kZgiGjyULzFwXpNdKrpadaiBsLSwSs_15be94a6de7672c87f48d978ad3821dc9dc324bb.jpg
     
  13. Apr 10, 2024 at 1:26 PM
    Lc200

    Lc200 New Member

    Joined:
    Jun 16, 2023
    Member:
    #33430
    Messages:
    893
    Gender:
    Male
    Vehicle:
    Pre Facelift SR5P
    Got around cleaning and replacing the timing tentioner cover gasket. Had a leak in the area. If this solves the issues, great
    , otherwise it's a leaking timing tensioner gasket. That is labrous, expensive and chances are something else will leak once you get around replacing that.
    Before and after cleaning.

    IMG20240329100101.jpg
    IMG20240410150225.jpg

    IMG20240410150147.jpg
     
    Last edited: Apr 11, 2024
    Rocko9999, raimieb and djwantke like this.
  14. Apr 10, 2024 at 1:34 PM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    547
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    Bull bar was on beforehand.

    It's not the tire sensors. It's the TSS stuff that's gone haywire of sorts. I believe (after doing some reading and watching a view YT vids), it's a matter of the sensors having to be recalibrated. The shop that did my lift said if it doesn't clear out in a few days, reach back out to him and he'll see what he can do. He told me to bring it back in 2 weeks to get things re-torqued. so we'll see by then.


    Same. In some comical way, it's like the proverbial nails on the chalkboard.
     
    Texas-Gorilla[QUOTED] likes this.
  15. Apr 10, 2024 at 1:47 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,699
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    You sure your brush guard or light isnt interferring with the TSS? from the pic it looks blocked compared to mine

    IMG_1807.jpg
     
  16. Apr 10, 2024 at 2:05 PM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    547
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    Yes. Cause I have the TSS sensor relocation bracket installed. Before the lift, the sensor was working fine (even after been relocated).
     
  17. Apr 10, 2024 at 2:24 PM
    Rob41

    Rob41 Veteran

    Joined:
    Jun 23, 2023
    Member:
    #33566
    Messages:
    946
    Gender:
    Male
    First Name:
    Rob
    Northern Michigan
    Vehicle:
    2023 Supercharged 4Runner TRD
    Magnuson Supercharger, CSF Performance Radiator, Eibach Pro-Truck Series 2R suspension, SCS Ray10 Bronze Wheels, Pedal Monster, TRD Pro Grill, TRD Pro Roof Rack
    Thanked it for not being a 6th Gen ;)
     
    TRDGrey2021, Texas-Gorilla and seakuv like this.
  18. Apr 10, 2024 at 2:53 PM
    hossler1788

    hossler1788 Turtle

    Joined:
    Dec 17, 2020
    Member:
    #18578
    Messages:
    2,117
    Gender:
    Male
    First Name:
    Joshua
    Central Pa
    Vehicle:
    2020 4runner
    So its the tss sensor? If so it has 4 bolts/screws that mount it to the grill you can put washers between the sensor and mount to aim it downward.

    But its abs and traction control warning lights its most likely a wheel speed sensor/wiring.
     
    djwantke and playdixie[QUOTED] like this.
  19. Apr 10, 2024 at 3:17 PM
    Bald Michelins

    Bald Michelins New Member

    Joined:
    Mar 23, 2021
    Member:
    #20503
    Messages:
    146
    Gender:
    Male
    Vehicle:
    21' SR5P
    Had a set of 5100's installed, 0.5" lift to the front. A badly needed improvement over the stock SR5 setup, which I knew when I bought it. I'm kicking myself for not doing it sooner!
     
  20. Apr 10, 2024 at 3:21 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,699
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    ahh, got it.
     
  21. Apr 10, 2024 at 4:42 PM
    laxman09

    laxman09 Gassy Member

    Joined:
    Dec 7, 2023
    Member:
    #37129
    Messages:
    424
    Gender:
    Male
    Mahoning Valley, OHIO
    Getting my Eibach kit put on tomorrow, hopefully I feel the same after.
     
    Pentangler and seakuv like this.
  22. Apr 10, 2024 at 6:15 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,508
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    This sounds right
    Obviously for whatever reason the sensor must not be happy anymore at its current orientation, post lift.

    I don't have TSS, but when I lifted and went to 285's, it didn't throw any wheel speed sensors. Perhaps some lines got stretched or something disturbed during lift.
    The shop telling you they'll see what they can do, about the dash lights, would seem like a copout to me. It should really be part of the discussion before lift by them.

    Good luck dude
     
  23. Apr 10, 2024 at 9:15 PM
    DangitDad

    DangitDad New Member

    Joined:
    Feb 24, 2024
    Member:
    #38736
    Messages:
    112
    Gender:
    Male
    First Name:
    Ken
    Vehicle:
    2023 White 4Runner
    3"/2" Ironman lift, Method 703 wheels, K02's, Pedal Commander, more to come
    Got the RCI skid plate kit installed. It didn't come with a rear diff skid plate. I had assumed it did. Should I get one?

    Also, do I need to get a gap filler for the space between the bumper and engine plate?

    [​IMG]

    Also installed these shovel holders. Saw it in one of Victory 4x4's bumper product photos and thought it was a neat idea. Got them on Amazon for $13. They seem pretty secure but wouldn't necessarily leave the shovel there for a long freeway drive. On the other hand, if it actually did come loose at all, that strap would jump down the notches and not just pop off. It was a tight fit to get the shovel handle in them. Even if the straps broke clean off at the same time (highly unlikely,) the shovel might fall about 1/2" and be held in place anyway... Now that I think about it more, it ain't going nowhere.

    [​IMG]
    [​IMG]
     
  24. Apr 10, 2024 at 11:37 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,508
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  25. Apr 10, 2024 at 11:39 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,508
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    WOW
     
  26. Apr 11, 2024 at 6:02 AM
    Lc200

    Lc200 New Member

    Joined:
    Jun 16, 2023
    Member:
    #33430
    Messages:
    893
    Gender:
    Male
    Vehicle:
    Pre Facelift SR5P
    Wanted to reinstall my OEM skid plates and realized the bolts are stripped.
    Anyone knows what size Tap and T handle tap wrench to buy and from where? Thanks
     
  27. Apr 11, 2024 at 6:21 AM
    BashFab

    BashFab Maker of Things

    Joined:
    Dec 9, 2022
    Member:
    #30016
    Messages:
    48
    Gender:
    Male
    First Name:
    Chad
    Columbia, SC
    Vehicle:
    2018 Black XP
    BashFab eco front bumper, hybrid bolt on rock sliders, rear swingout bumper, locked f&r, 4:88's, 35x12.5, full Rci skids
    Installed our first render of full high clearance plate bumper, CMC, full bud built skids, pck bracket, SpideyTrax 1.25 spacers, bumpstop spacers and a few other goodies. Rock sliders coming soon. She's come a long way for under 9k miles

    PXL_20240410_225516007.PORTRAIT.jpg

    PXL_20240410_232532833.PORTRAIT.jpg
     
    Last edited: Apr 11, 2024
  28. Apr 11, 2024 at 6:36 AM
    hossler1788

    hossler1788 Turtle

    Joined:
    Dec 17, 2020
    Member:
    #18578
    Messages:
    2,117
    Gender:
    Male
    First Name:
    Joshua
    Central Pa
    Vehicle:
    2020 4runner
    I may have to look into thse end caps. Pretty much trimmed as much as I could out of my factory ones and I still need more clearance.
     
    raimieb likes this.
  29. Apr 11, 2024 at 8:00 AM
    raimieb

    raimieb Hobby Mechanic - Love Our 4Runner!

    Joined:
    May 16, 2022
    Member:
    #27095
    Messages:
    806
    Gender:
    Male
    First Name:
    raimie
    Vehicle:
    2021 ORP 4x4
    Lots…
    Have them too and love them!
     
    hossler1788[QUOTED] likes this.
  30. Apr 11, 2024 at 1:15 PM
    NOS4A2-1

    NOS4A2-1 New Member

    Joined:
    Jul 23, 2020
    Member:
    #15686
    Messages:
    180
    Gender:
    Male
    NY
    Vehicle:
    2020 Venture
    New tires, I decided to give the new Cooper Discoverer road+trail A/T a try. It appears the Discoverer AT3 has been discontinued and this is the replacement. Not many reviews out there yet, but the ones I read are mostly positive. I’m running stock 265/70/17 so far so good, no noise or vibration issues yet, they feel good. If any thing arises I’ll post up.

    IMG_1730.jpg IMG_1729.jpg IMG_1728.jpg
     

Products Discussed in

To Top