1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2025 6th gen 4Runner Official Reveal Thread

Discussion in '6th Gen 4Runners (2025+)' started by TexasFunRunner, Apr 8, 2024.

  1. Apr 9, 2024 at 10:08 PM
    #481
    Trekker

    Trekker Regular Member

    Joined:
    Jul 25, 2020
    Member:
    #15732
    Messages:
    991
    Gender:
    Male
    Vehicle:
    1997 3rz 5spd
    I'm hoping Tinkers Adventure got invited to this event. He would know if the base 4wd had metal skid plates.

    If you have an old car, you know parts sharing starts to become a really good thing. If the parts that are shared work well, I have no problem with it. The windows on the new generation seem smaller. When I was watching Doug's videos on the 4runners, each generation of interior got progressively less open feeling. The black ceiling doesn't help, but windows certainly got smaller and higher for crash protection.
     
    icebear likes this.
  2. Apr 9, 2024 at 10:12 PM
    #482
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,658
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    84491affce968672f539898917e205ad.jpg

    quite different depths along the 3 layers of this bumper. not as cut friendly as the 5th gen
     
  3. Apr 9, 2024 at 10:21 PM
    #483
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,658
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Probably something like this, above the fender vent, and keep some meat next to the silver valance - to retain at least one bumper cover fastener down there.
    This photo at the bottom shows the potential difficulty in choosing the cut line - big fenders are in the mix for sure.
    It even looks to me like the bumper cover-to-body seam goes under the fender, little different to this remove bumper as well.

    Screenshot_20240409-221537.png
    Screenshot_20240409-221458.png
     
  4. Apr 9, 2024 at 10:26 PM
    #484
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,658
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    :ohsnap:
     
  5. Apr 9, 2024 at 10:31 PM
    #485
    Gharddog03

    Gharddog03 New Member

    Joined:
    Dec 11, 2022
    Member:
    #30041
    Messages:
    167
    Gender:
    Male
    Fresno CA
    Vehicle:
    2021 TRD PRO Lunar
    Looks like a Durango.
     
    Naville and clonebuilder like this.
  6. Apr 9, 2024 at 10:32 PM
    #486
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    3,479
    Olympia, WA
    Toyota hybrids are pretty much bulletproof. The problem is the battery itself that dies if not used regularly. Heads up, 6th geners, drive the stupid things at least a couple of miles a day. Don't park them for 6 months. And clean and replace the air filters battery for the battery. I think they have inverter coolant too. Baby the stupid things and hppe for the best, they aren't your good old trucks
     
  7. Apr 9, 2024 at 10:42 PM
    #487
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    3,479
    Olympia, WA
    This is still not too horrible. Jeep's 4xe is bullshit on steroids. I can't wait when Cummins releases their hydrogen motors, this battery nonsense has gone too far. Hydrogen vehicles have batteries too so we are screwed there too
     
  8. Apr 9, 2024 at 10:45 PM
    #488
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    3,479
    Olympia, WA
    5th gen has 33 degrees in the front. And a Viper cut on the 6th gen seems like a challenge. Just wait when steel bumpers are made for them and get rid of the entire crap
     
    djwantke likes this.
  9. Apr 9, 2024 at 11:04 PM
    #489
    4runningMan

    4runningMan New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,746
    New Mexico
    All I’m sayin is this is gonna make it tough to camp out in the back of a T4R. It’s a major bummer.
     
    nonuniform, clonebuilder and mac1usa like this.
  10. Apr 9, 2024 at 11:08 PM
    #490
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    3,479
    Olympia, WA
    Lift doesn't give clearance(Unless hefty problematic body lift), big tires do. So 35s are the way to go now.
     
  11. Apr 9, 2024 at 11:18 PM
    #491
    Bald Michelins

    Bald Michelins New Member

    Joined:
    Mar 23, 2021
    Member:
    #20503
    Messages:
    149
    Gender:
    Male
    Vehicle:
    21' SR5P
    MSRP will be jaw dropping. No thanks. I'm too old for that game. I've played that game in the past. Smart money is on a well cared for 5th gen. Drive it forever.
     
    2Toys, Naville, 5thToy and 6 others like this.
  12. Apr 10, 2024 at 12:02 AM
    #492
    Remedy6

    Remedy6 New Member

    Joined:
    Jan 2, 2024
    Member:
    #37664
    Messages:
    36
    Gender:
    Male
    Vehicle:
    2023 Lunar Rock ORP
    access to the third row
     
    4runningMan[QUOTED] likes this.
  13. Apr 10, 2024 at 1:26 AM
    #493
    mac1usa

    mac1usa New Member

    Joined:
    Oct 20, 2020
    Member:
    #17452
    Messages:
    2,312

    Unfortunately that means taking it out in snow and salt for many and surely the frame rust issue still exists. It’s a catch 22 for those who want to keep a long time. You’re right not the good old trucks.

    If you want to buy one and retire and keep for long time and won’t drive as much, or work from home probably not a good idea.

    I’m so glad we can be mandated so many personal sacrifices in favor of what some think are good for the environment
     
    Last edited: Apr 10, 2024
    TexasFunRunner[OP] likes this.
  14. Apr 10, 2024 at 1:48 AM
    #494
    GunRunner

    GunRunner New Member

    Joined:
    Apr 24, 2018
    Member:
    #5886
    Messages:
    216
    Gender:
    Male
    Vehicle:
    2018 4Runner OffRoad
    I have a Honda Civic with 230k miles on it and never had a single issue and all I’ve really ever done is oil changes and belts at the required interval. Turbos are not that bad.
     
    icebear and engineer90 like this.
  15. Apr 10, 2024 at 1:56 AM
    #495
    GunRunner

    GunRunner New Member

    Joined:
    Apr 24, 2018
    Member:
    #5886
    Messages:
    216
    Gender:
    Male
    Vehicle:
    2018 4Runner OffRoad
    I wonder what color choices they are going to offer? I hope underground gray comes back.
     
  16. Apr 10, 2024 at 3:37 AM
    #496
    ace96

    ace96 New Member

    Joined:
    Apr 4, 2022
    Member:
    #26430
    Messages:
    26
    Gender:
    Male
    Vehicle:
    2016 Super White 4Runner SR5 premium, 2023 Solar Octane 4Runner TRD Pro
    TRD Pro wheels, TRD pro valence and grill, black out lettering.
    The battery is covered by 10 year 150k mile warranty. You don’t think battery technology has changed since old Prius?
     
    icebear likes this.
  17. Apr 10, 2024 at 3:38 AM
    #497
    MooreKen

    MooreKen 2023 TRD PRO “Solar Octane”

    Joined:
    Mar 4, 2023
    Member:
    #31561
    Messages:
    339
    Gender:
    Male
    “Like the Tacoma, the 4Runner is built on Toyota’s new TNGA-F body-on-frame truck platform and should deliver ride quality improvements we’ve seen in other vehicles. Unlike the Tacoma, Toyota will continue to assemble the 4Runner at its Tahara plant in Japan. GearPatrol.com “
     
  18. Apr 10, 2024 at 3:39 AM
    #498
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,821
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    I'm curious how long it will be from the lift-gate to the fully folded seat. It might be long enough for shorter people.

    Otherwise, I wonder if the seats will be easy to remove, in order to use the full length to back of the front seats.



    What's the point of owning a 4×4 and letting it sit all Winter? Bad weather is what they're made for.

    With a completely new frame, how are you already certain that there's going to be rust issues?

    And, frame rust was mostly a Tacoma issue. Every once in awhile someone will claim that 4Runners are just as bad, but there is nothing to support that statement.
     
    Last edited: Apr 10, 2024
    steelevo likes this.
  19. Apr 10, 2024 at 3:46 AM
    #499
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,821
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Obviously every battery will grenade after 10 years. Look around on this forum. It's well known that battery technology hasn't changed since the '70's.

    Kidding aside, I do believe it will be a maintenance item. But, I believe bad cells can be replaced on some batteries and it's a lot less expensive than replacing the whole thing.

    Luckily we also have a non-hybrid option.
     
    steelevo, ace96[QUOTED] and icebear like this.
  20. Apr 10, 2024 at 4:17 AM
    #500
    TexasFunRunner

    TexasFunRunner [OP] New Member

    Joined:
    Jan 12, 2023
    Member:
    #30601
    Messages:
    224
    Gender:
    Male
    DFW
    Vehicle:
    SUV
    No, it was not a given, apparently you have not been reading the speculation thread for the last year. There was lots of information and posts that it was moving to Mexico.

    One post said it would start production in Japan for the first year and then transition to Mexico in future years, let's hope that is wrong as well.
     
    5thToy, icebear and Thatbassguy like this.
  21. Apr 10, 2024 at 4:28 AM
    #501
    Hikenbike

    Hikenbike New Member

    Joined:
    Apr 9, 2024
    Member:
    #39717
    Messages:
    5
    Gender:
    Male
    Love it, love it, love it!……all but the Limited (ugh!).

    Seems like a blend of 4th and 5th gens. Well done looks wise. Will eventually see how she drives.
     
    TonyPonz likes this.
  22. Apr 10, 2024 at 4:31 AM
    #502
    K20K54R

    K20K54R New Member

    Joined:
    Oct 6, 2023
    Member:
    #36022
    Messages:
    102
    Anyone catch whether a review mentions if these new engines will have stop/start when the vehicle is stationary?
     
  23. Apr 10, 2024 at 4:40 AM
    #503
    Bluesky 07

    Bluesky 07 Not a New Member

    Joined:
    Jan 26, 2019
    Member:
    #8560
    Messages:
    515
    Gender:
    Male
    First Name:
    Russell
    Northern Georgia
    Vehicle:
    Silver ‘07 Sport V6 4WD @ 265K miles
    “Deep” Satoshi grille | X-REAS delete / TRD Offroad front springs & Bilstein 4600 shocks + FJC rear springs | Weathertech front & rear mats | Tinted front windows | Floor Armor cargo mat | TPMS bypass | LED interior, tag, & reverse lights | BlueSea Systems console USB power ports | Gentex 453 autodim mirror w/Homelink & compass | Kenwood DDX373BT HU + Audiovox backup camera | Fumoto F-103S | Bazooka tube subwoofer | Kenwood speakers & KAC-M1804 amp | Philips H9/9011 headlight bulbs | Rexing V1 Gen3 dash cam | Map light mod | Breather mod | Off-road Nav Setup | Power Stop Z36 brakes | OBD Fusion diagnostics
    Isn’t the front end strangely long?
     
  24. Apr 10, 2024 at 4:43 AM
    #504
    Lc200

    Lc200 New Member

    Joined:
    Jun 16, 2023
    Member:
    #33430
    Messages:
    926
    Gender:
    Male
    Vehicle:
    Pre Facelift SR5P
    I like it. The exterior seem to be tad overdone but overall looks like a maturer design.The interiors with those tan seats looks great.
    I can see a lot of people with a grand highlander or a Honda pilot in mind also looking at this due to its softer, more family friendly vibes. Might not have the same space but even then.
    Toyota should still sell bucket loads of these.
     
  25. Apr 10, 2024 at 4:55 AM
    #505
    mac1usa

    mac1usa New Member

    Joined:
    Oct 20, 2020
    Member:
    #17452
    Messages:
    2,312


    I am not certain they did not update the frame for rust issues. But if they did nobody commented of the videos I watched anyway and I think they would be worthwhile commenting on

    I get most probably want to use it in winter but some of us want to get a longer life out of it. I have read enough posts about frame rust (had some upon delivery myself), needle bearing issues, garnish rubbing paint on rear hatch, etc on this website that I believe are legit issues.

    I think the bulk majority of us enjoy our 4Rs myself and believe it’s overall a quality vehicle the 5th Gen. But not even toyota is exempt from issues. These are all designed with human elements and not perfect. The key is how issues are handled and addressed. Are they corrected properly and to the best of a company’s ability. It’s just like any of us owning up when we make mistakes we all make them but do your best to correct it and prevent in the future.
     
  26. Apr 10, 2024 at 4:57 AM
    #506
    mac1usa

    mac1usa New Member

    Joined:
    Oct 20, 2020
    Member:
    #17452
    Messages:
    2,312
    They must be selling the Tacomas like hot cakes. I’ve seen one on all the lots here and that briefly
     
  27. Apr 10, 2024 at 5:00 AM
    #507
    TexasFunRunner

    TexasFunRunner [OP] New Member

    Joined:
    Jan 12, 2023
    Member:
    #30601
    Messages:
    224
    Gender:
    Male
    DFW
    Vehicle:
    SUV
  28. Apr 10, 2024 at 5:04 AM
    #508
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,821
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    It's a completely new frame. There could be issues, but there's no reason to assume there will be.

    You don't need to park it all Winter for it to last. My '03 lived outside and had a solid frame after 257K miles and years of neglect. If you're really concerned, there are numerous products that can protect the frame.

    Where are all of these posts about frame rust? Are you talking about surface rust?

    The last time someone claimed they were worse than Tacomas, they could only provide 3 examples of significant frame rust (on 4Runners) and they were high mileage vehicles and likely caused by neglect. I wouldn't worry about it so much.
     
    steelevo, icebear and broken-giver like this.
  29. Apr 10, 2024 at 5:06 AM
    #509
    broken-giver

    broken-giver BFD

    Joined:
    Apr 14, 2023
    Member:
    #32346
    Messages:
    1,034
    Gender:
    Male
    Oh boy! That will really boil my blood. That’s one thing 4R should never do. “Old school” no
    More :(
     
    steelevo and clonebuilder like this.
  30. Apr 10, 2024 at 5:07 AM
    #510
    MooreKen

    MooreKen 2023 TRD PRO “Solar Octane”

    Joined:
    Mar 4, 2023
    Member:
    #31561
    Messages:
    339
    Gender:
    Male
    So I finally watched TRDJON’s YouTube video of the TRD PRO and I actually liked what I saw. Maybe I’ll get one someday but I’m still keeping my 5th Gen…lol.

    I do have one question though. My 2022 Lexus had ventilated seats which I was never able to get comfortable sitting on. (This was the reason I got rid of it). I’m wondering if the ventilated seats will effect the seat’s comfort?
     
    Last edited: Apr 10, 2024

Products Discussed in

To Top