Willing to do BMC. Is that enough -12 offset

Hey there group. 1st, I have new 17" wheels with -12 offset. 2nd, I'm wanting load C tires. 3rd. A little concerned the -12 offset will prevent using 285s even with the body mount chop and no lift. (If I'm wrong, Hollar) Was considering Falken Wildpeak 275/70s but the 58 lbs a tire irks me a bit. Ko2s in 285s are lighter in load C. Any other 275s in load C that rate without too much noise and rate well? Thanks in advance. Rich

 

Welcome

 

Here yeah go. No lift (trd pro suspension). 285 70 17 c rated goodyears( 45lbs). 17x8.5 -12 offset. With a body mount chop, and no rubbing.

Enjoy

 

Hey OP @Richard2wheels
Welcome here!!

Great question
Ask and you shall receive, Hossler is on it.

So, I have a BMC and a lift, running load E 285/70's.
But, before adding wheel spacers (-32mm offset), my 0 offset 9" wide wheels barely rubbed anything except a little sliver cut off the bottom of the front fender/bumper in front of tire.

Goodluck!

 

Thanks for the input guys. Made a choice and went what I thought was conservative with Falken Wildpeak 275s. The -12 offset pushed me to still need a BMC and the usual front small trim off. But all is great and super happy. Waiting on rock sliders now.
Thanks again, Richard2wheels

 

Looks pretty level for no suspension mods.

 

I think it's just the picture angle . Id say it still has an inch of rake.

 

Looks awesome!

 

Thanks guys. I does have a pair of my stock wheel/tires in the back for the trip home. R2W