1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Ride Height Related Question

Discussion in '4th Gen 4Runners (2003-2009)' started by Wags06, Mar 15, 2024.

  1. Mar 15, 2024 at 6:41 AM
    #1
    Wags06

    Wags06 [OP] New Member

    Joined:
    Mar 15, 2024
    Member:
    #39141
    Messages:
    2
    Gender:
    Male
    Vehicle:
    2006 V8 4Runner
    Stock
    I’m riding the beach a few times a year in my 06 4Runner V8 and am frequently filling the skid plates with sand from bottoming out. Suspension is original. Was considering ride height options posted in this forum but wonder if it makes more sense to start with new springs and shocks. I’m thinking that restoring any lost ride height due to weak springs and controlling bounce with new shocks may help control the sand plowing. Never had that issue with my 3rd gen 4runner. Thanks
     
  2. Mar 15, 2024 at 7:41 AM
    #2
    BassAckwards

    BassAckwards New Member

    Joined:
    Aug 29, 2016
    Member:
    #2575
    Messages:
    225
    Vehicle:
    2006 4Runner V6 SR5
    I’m running 3rd gen Tacoma front coilovers on my v6 4th gen 4Runner and it gave me about 2-2.5” of lift up front. Mine is 2wd also, so if you’re 4wd you might get a little less lift. I got these for $190 shipped so they are a decent budget option. I will say the ride is stiffer than stock, but they have worked well for me so far
    IMG_0012.jpg
    IMG_1892.jpg
     
  3. Mar 15, 2024 at 12:16 PM
    #3
    xtremewlr

    xtremewlr New Member

    Joined:
    Oct 10, 2020
    Member:
    #17247
    Messages:
    433
    Gender:
    Male
    First Name:
    Todd
    Tucson, AZ
    Vehicle:
    2003 4Runner V8 Limited 4WD
    Lots with more in the works
    @Bluesky 07 has an awesome writeup on changing out suspension stuff with easy to find and inexpensive used Tacoma parts, such as @BassAckwards has shown in his post above. All these parts will fit your V8 4Runner without issue as well.
     
    Bluesky 07 likes this.
  4. Mar 21, 2024 at 9:39 AM
    #4
    Wags06

    Wags06 [OP] New Member

    Joined:
    Mar 15, 2024
    Member:
    #39141
    Messages:
    2
    Gender:
    Male
    Vehicle:
    2006 V8 4Runner
    Stock
    Thanks for the great info. It looks like the tacoma parts option is a good way to go. I guess my only concern would be with how much the ride quality might be effected. I don’t have access to a test ride in a similarly modified runner. Mine is a 4wd and it currently sits about 2.5 inches lower in the front measured from tire to fender. Do you know if that was the designed stance as new, or if the drop is likely from tired sagging front springs. IMG_1195.jpg
     
  5. Mar 21, 2024 at 5:26 PM
    #5
    BassAckwards

    BassAckwards New Member

    Joined:
    Aug 29, 2016
    Member:
    #2575
    Messages:
    225
    Vehicle:
    2006 4Runner V6 SR5
    Most of the stock ones I’ve seen have been nose down from the factory. It’s a good bit stiffer than stock. It has me wanting to remove the sway bar, but I live on a washboard dirt road. If you drive mostly on the road they are a good option. If you drive off road frequently, you may want to look into a nicer riding setup. I personally think it is a little bit too much spring for my 2WD. Being that yours is 4wd though, that may help the ride quality a little. My overall opinion is that the ride is firm, but not harsh
     

Products Discussed in

To Top