Daytonaviolet’s Blizzard Pearl Build

When I had 285’s, I was still using the flaps. Took them off now they I have 295’s

 

Finally finished wrapping my door handles in blizzard Pearl wrap. Very tedious, but worth it!

 

Where did you purchase these wraps?

 

I just ordered the sheets of vinyl and vinyl wrapped them myslef. Heat gun and razor blade.

 

This is awesome and exactly what I was looking for. Nicely done!

 

Where did you order your vinyl from?

 

Ordered the vinyl from Metro Restyling, here is the link to the white Pearl I got. It’s a match to the blizzard Pearl.

https://metrorestyling.com/collecti...very-gloss-white-pearl-vinyl-wrap-sw900-109-s

 

Side view of handles

 

I see you have headrest screens. Did you install yourself? I'm looking to do the same for the kiddoes. If you installed yourself, care to share how you did it? Thanks!

 

I do but it was there from previous owner. Upon closer inspection, they cut the headrest and gutted some of the padding to fit the screen. Wires are run down the metal poles.

 

I moved the clock up a bit

 

I finally added my Detours of Maine (Ridge Runner) tire carrier. I also added license plate relocation as well as rear camera relocation.

 

I am starting a build similar to yours, with the first thing being replacing the bumper cover. This thread and parts list helped IMMENSELY! Finally got the trail cover on last night.

 

Let us know if you have any questions

 

@Daytonaviolet many thanks for the write up and parts list. I'm in process of doing similar with my 22 Limited.

 

Awesome post up pics when your done

 

Will do. I'm just doing bumpers, rockers, and some chrome delete (color match handles, blackout tailgate garnish)... But the parking sensors, TSS, and BSM should be fun.

 

Sounds like a fun project

 

Got the front and rear bumpers in and the rear garnish. Not sure yet what I wanna do with the rockers (trim, replace, or leave as is) as I have the automatic running boards. Still need to replace the handles and paint the rack. Was able to move over the parking sensors and TSS module. Probably going to move the TSS behind the grill at some point.

Before:




After:

 

Wow .. awesome job

 

Color matched handles came in. Need to paint the rocker chrome.

 

Looks good . I was debating color match as well be trued out the black handles.

 

This past week I updated the stereo to the CTH t12 v2. It has a 14” screen and looks similar to the gen6 HU. I opted in black so i updated the steering wheel, shifter, HVAC and passenger finishing panels to black as well. Perhaps next is metallic black door handles

 

What a cool build. Best Limited I’ve seen.

 

Great build on the limited. Re the T12.2 headunit - can you report what features you immediately noticed were missing by removing the original headunit? Did you run all new cameras to the dash? Also, is that redwood interior? And if you had to do it again, would you prefer the black? Im looking at a white limited and cant decide on redwood or standard black. Thanks!

 

I think you’ll loose any oil change info you stored on the oe HU. Other then that I didn’t loose anything of value.

i also installed the CTH anytime camera. Now I can view rear and front camera anytime even in CarPlay.

when looking for my limited, I was specifically looking for the redwood. That’s was my first choice but would have chosen black next.

I add this the other day. Warn EVO s-12 winch and factor 55 fairlead and ultra hook.

 

Awesome ride im getting ready to start ordering parts to do my front end swap.

 

How’s the t12 V2? Is the mounting solid?
in my T10 knobless I don’t like how it’s only held by clips. I really like the bigger screen, I might switch.