Best "aggressive" looking tire with *street* performance :D

I'm trying really hard to convince my buddy to modify his Gladiator

 

What about Duratrac RT? I'll be lookimg at these new Duratracs this year

 

From what I saw, the RT only comes in an "E" load range in the size I would want, and I would never buy E range tires for a 4Runner. I've run C,D, and E rated Duratracs on my Wrangler and my Silverado and I would do it again without a question in C or D range - BUT the Mickey looks like an awesome tire, and comes in SL.

 

True, hoping this summer they'll get a D or C version (I curently have D Duratracs). What caught my eye was 285/75/17 vs the size I have now 285/70/17

 

Took my 4Runner in to Discount Tire yesterday for a screw in the left rear tire (3rd time in the same tire, lucky me). They repaired the tire while I waited, but said it would have to be replaced if it happened again in the same tire. If I am so lucky as to have that happen, I suppose I'll revisit the replacement scenario at that time. Otherwise I decided I just need to wear the current Falken Wildpeak AT/3s out and not spend the bucks needed for a new set at this time. They really aren't that loud.

 

I picked up some 255/75R17s in SL and they're not bad around town. Shakedown run is end of the month so we'll see how they hold up.

 

So I ended up going with MT Baja Boss's. Same size as my old KO2's, 285 70R 17's. My question is, my mpg already went down a mile a gallon, does that seem possible from changing manufacturers? I acknowledge there's quite a bit more tread on my new tires then my old ones.

 

Looking good. Def possible depending on the weight of the tire and aggressiveness.
Both E rated?

 

Looks good. Did you get them in E load or SL load? The weight from E load would certainly drag down MPG.

 

Whatever "Standard load" is. I'm assuming that's C. My previous KO2's were C as well

 

Question for ya Fast Eddie is your rig still stock suspension? I didn't know if the 285/70r17 fit well on stock suspension of an ORP? I've been looking at new tires but haven't done a thing to my ORP yet in terms of any suspension lift. All stock 5k miles in.

 

Can you post some front, rear, quartered pics? I had this size on my Tacoma and really liked. Not sure on the look yet for the 4R

 

I can, but they're on Method 701s which are really wide and not at all what they'd look on Toyota wheels. Gimme a bit and I'll take some later.

SL and XL are P-metric ratings about load vs C/D/E which are heavier construction and load ratings. The C/D/E are an actual standard spec while SL/XL are a manufacturer designation.

 

It has leveling spacers in the front and needed some minimal trimming to the front bumper and I removed the mud flaps and no rubbing although I now have 1.25 wheel spacers which cause it to rub. Planning on getting a BMC in the future.

 

@HuskerRunner it's overcast so the contrast is rough but here's a few quick ones

 

Unfortunately the tire place in my small town can't guarantee they would ever get these and I didn't want to buy from somewhere else for a few reasons. They did have these in stock so I guess I'm a KO2 guy now

 

I had Duras on my old ZJ like 15 years ago, and I loved them. I'm glad they finally updated these.

Looks like the center tread pattern is a little tighter on the new one? I know you've already posted pics, but could you post up a well lit closer one of the sidewall?

And I apologize if this has already been answered, I'm having a hard time keeping up all the replies in this thread, but how is the noise?

 

where can I find this headlight/fog/bar light combo fr hahahaha, damn AI..

 

can you not touch the dark spots on the screen when taking a photo to adjust the contrast? would love to be able to see something in these pics. just ordered ko2s myself

 

I mean you can pull down the file and tweak it if you'd like but I don't exactly care enough to put much effort into quick camera photos. Click all I want, something was getting blown out with the lighting as it was.

 

I've had these a few times and they're a solid tire. You won't be disappointed!

 

New to the Forum so I hope I am doing this correctly.

I noticed you painted your TRD ORP wheels. They look amazing! Not happy with current look and was going to swap out for Black TRD but I actually think I like this better. Can you elaborate on process, cost and durability.

Thanks!

 

Without you quoting the post, it's not clear who the you you're referencing is.

 

I was referencing this pic from a TrailSpecial22 post on page 1. Specifically, I liked how he painted his original TRD ORP wheels.

https://www.4runners.com/threads/best-aggressive-looking-tire-with-street-performance-d.36933/

 

Got it. But without you quoting post #15, that has the photo, or tagging @TrailSpecial22, he'd never know you asked that question.

 

Love my KO2s so much that I will be trying the KO3s when these things finally wear out.

 

OP,
certain Mickeys tires I heard from folks improved their mileage (as long as your not increasing load rating of course)
Long lasting street wear
*dunno if MT’s come with white letters available, so I paint markered letters
They also have wicked rim protection
@FastEddie6 I bet the 1 mpg is prolly the new tread and everything, or even a circumstantial coincidence.