Wheel Bearings & Hubs for Sale *** 4th & 5th Gen ***

I offer these on the Tacoma sister site, they are interchangeable parts.
https://www.tacomaworld.com/threads/537080/

Private Message to order

Also fits
LEXUS GX460 2010-Present
LEXUS GX470 2003-2009
TOYOTA 4RUNNER 2003-Present
TOYOTA FJ CRUISER 2007-2014
TOYOTA TACOMA 2005-Present

I don't sell singles

Temporary Shipping charge $20
Read here

4x4
*** NSK Bearings ***
$325


2WD
$415
Not compatible with aftermarket spindles ie Maxtrac, Total Chaos


My Process
I use a custom press plate that removes variation by aligning and only applying pressure at the proper area.


Warranty
Provided by manufacturer, their conditions apply; I am a press service only.

Terms of Sale
Inspect the parts upon delivery for press service satisfaction.
If any discrepancies are found contact me IMMEDIATELY.
Do NOT attempt to install if any discrepancy is found.

No other services or conditions are to be assumed.

To expedite shipment, I preorder and keep parts on hand for quick shipment.
Payment reserves next available pair when not in stock.
Everything included is pictured.​

​

4x4 Install​

Torque CV axle nuts with a calibrated torque wrench to 173 lb ft​

Loan-A-Tool
Torque Wrench (173 lb ft).....
Socket (35mm)..................
Puller (if difficult to remove)


A loose assembly shortly after installation means your CV axle nut lost it’s torque.
If the axle nut loses it's torque, forces acting on the assembly will cause the bearing to lose it's press on the hub.​

This can happen many ways:

• The nut backs off

Clean CV stub threads with solvent after inserting through hub, then apply Loctite 241​

​

• The CV stub isn't seated fully during installation

Clean CV stub splines of rust/grime and apply anti-seize during installation​

​

• CV axle turned while torqueing and gave the 'click' feeling falsely

Engage 4x4 and set parking brake before installation​

​

CV/Knuckle Seals:
Not included but recommended
90316-A0001
(aftermarket options)
90304-A0001
(dealership only)​

 

Welcome, good to see you here.

 

Thank you

 

@06silverback
Shipping today
Shipped

 

Updated, lower price.

 

I want to thank everyone that's reached out to me on TW, I appreciate your support!