2014+ 4RUNNER COMPLETE SKID PLATE COLLECTION

Welcome
Cali Raised LED
www.CaliRaisedled.com

Phone: 888-385-5036 l Email: info@caliraisedled.com l Instagram: @cali_raised_led

https://caliraisedled.com/products/2014-4runner-complete-skid-plate-collection


Before you hit the rough terrain, protect your vehicle with a front skid plate that can take a hit and is built to last through the toughest conditions. Guarding the underside of your outfitted off-road vehicle as you adventure in the great outdoors, these skid plates are custom-made to fit your vehicle so you can focus on the trail ahead. Available in steel and aluminum​

2014+ 4RUNNER TRANSFER SKID PLATE​

https://caliraisedled.com/products/4runner-transfer-skid-plate





2014+ 4RUNNER LOWER CONTROL ARM SKID PLATE

https://caliraisedled.com/products/2014-4runner-lower-control-arm-skid-plate






2014+ 4RUNNER TRANSMISSION SKID PLATE

https://caliraisedled.com/products/4runner-transmission-skid-plate




2014+ 4RUNNER FRONT SKID PLATE

https://caliraisedled.com/products/4runner-front-skid-plate





2014+ 4RUNNER FUEL TANK SKID PLATE

https://caliraisedled.com/products/4runner-fuel-tank-skid-plate



​

 

Unfortunately I recently purchased full skids from another vendor recently but the pic of the perforated gas skid has me intrigued. I've seen some other centerline skids that have holes to "prevent suction" in mud - what is the purpose of the large perforated holes on your gas tank skid? Drainage to help prevent corrosion? Eliminate suction? To lighten the weight? Aesthetic design coice?

 

Two main reasons to let dirt, mud, and water fall down as well as the weight.

 

Thanks for the reply! That makes sense as long as the final design still provides adequate protection. I've read a lot about skids needing to be dropped and cleaned to reduce corrosion from mud buildup but not sure how often people do that once installed. Seems like a logical design choice

 

Yeah, we didn't want that to happen to our customers. Taking a skid plate off and on is a lot of unnecessary work.

 

Before you hit the rough terrain, protect your vehicle with a front skid plate that can take a hit and is built to last through the toughest conditions. Guarding the underside of your outfitted off-road vehicle as you adventure in the great outdoors, these skid plates are custom-made to fit your vehicle so you can focus on the trail ahead.

(Must be 4WD)

Collection Includes:

• Front Skid
• Transmission Skid
• Transfer Skid
• Lower Control Arm Skid
• Fuel Tank Skid

Check it out here: https://caliraisedled.com/products/2014-4runner-complete-skid-plate-collection

 

Come on @jake long15 all this advertising without a good discount???lol. A skid plate it’s on my top list to do. However it’s mainly for oil changes. Im getting tired of removing the OEM skid plate all the time to do a simple oil change. I was looking at the aluminum Rival skid but unsure of the quality and durability, it does however has the two good access door for the oil filter and oil drainage. I may go with RCI though as they have a current sell going on now!

 

I have never heard of that brand! We offer free shipping, no taxes, and the product is in stock ready to ship today.

 

@jake long15 Any planned support for KDSS 4R's?

 

Any future plans to accommodate KDSS? All Off Road models in Canada come with KDSS so you're missing a part of the market.

 

I am now confused. You replied to me stating they were compatible with KDSS which you have since deleted, and are again stating it is not compatible. I am in the market for full skids but am losing confidence here.

 

Unfortunately they are not compatible with KDSS. If you have any more questions please let us know.

 

Has anyone ever thought of putting like a 3" hole in their aluminum plate where the oil filter is ?

I had to take my plate off to do rhe oil change last week, all in all it wasn't too bad - one little jackstand helped keep it up once it was in position... I guess the question remains is how many oil changes before I get tired of doing that?? But it'd also nice to pop it off and inspect things from below!

 

A majority of the aftermarket skid plates have "doors" to access the oil filter

 

Yeah I went for the oem one but that's like half priced

All in all not bad had to chop off some metal to make it fit for the kdss

Not a big deal to remove the plate every now and then I suppose

 

Get rid of your factory plastic skid plates and replace them with ours! The plastic skid plates are not strong and can crack. Ours hold up well and can take a beating against the rocks. You can either get our skid plates in aluminum or steel. It's worth the investment! You will have the assurance of safety and the peace of mind that your vehicle is equipped for whatever the trail throws your way. Find them here!-
https://caliraisedled.com/collections/2010-2024-toyota-4runner-bumper-slider-skids

https://www.instagram.com/p/C6CxIPkNVo9/

 

Our skid plates are an easy install! We offer a full skid setup, or individuals in both aluminum and steel! Great protection, and a great product! Go get them here!
https://caliraisedled.com/products/complete-skid-plate-collection-for-2010-2024-4runner
https://www.instagram.com/p/C8CzDi8BeCG/

 

Cali Raised has full skids! Aluminum and steel, powder coat or raw, for the 4Runner! Front, transfer, transmission, LCAs, and gas tank! They are in stock, ship for free, and no tax! You can order yours today at caliraisedled.com!
https://caliraisedled.com/products/complete-skid-plate-collection-for-2010-2024-4runner

 

Which type of metal are you choosing for your 4Runner? Aluminum or steel? We have both! You can find your single skid, or the whole set at caliraisedled.com today!
https://caliraisedled.com/collections/2010-2024-toyota-4runner-bumper-slider-skids
https://www.instagram.com/p/C-KrzHcRs5k/

 

Its the little things
Would you choose RAW finish or Powder Coated?
https://caliraisedled.com/products/complete-skid-plate-collection-for-2010-2024-4runner
https://www.instagram.com/p/C_OBrvPPQ8W/

 

I wish you would make a metal filler plate for us guys using the TRD engine skid . It would take the place of the front plastic splash piece that gets removed when using the TRD skid .

 

I will make sure I pass that suggestion along to our team, thank you!

 

It's Black Friday!

Make sure you gear up will all your Cali Raised favorites, 15% OFF sitewide with no tax AND free shipping!

https://caliraisedled.com/

 

Cyber Monday is here, Make sure you stock up on all your gear with Cali Raised!

15% sitewide for a LIMITED time only!

https://caliraisedled.com/

 

This sale is just too good to end, we have extended the Cyber Monday sale for the ENTIRE week!

Stock up on your favorites and get 15% off the entire site for this week only, seriously... we mean it this time... this week ONLY!

 

Today is the LAST day of the Cyber Week Sale, 15% OFF sitewide, now is your last chance to save BIG!

 

Treat yourself this holiday season and grab a set of the Cali Raised Skid Plates and make sure your Rig is Trail protected!

https://caliraisedled.com/collections/2010-2024-toyota-4runner-bumper-slider-skids

https://www.instagram.com/reel/DAeCKawSKzi/

 

Are you looking to add some must-have protection for your rig?

Look no further than the complete skid plate collection offered by Cali Raised LED

This collection includes all the necessities you need to give your vehicle the proper armor for the trail

Get yours today! https://caliraisedled.com/products/complete-skid-plate-collection-for-2010-2024-4runner