What have you done to your 5th Gen 4Runner today?

Want to get one of these but hard to find one with just the 2 top holes

 

The plate sits inside and will cover the two bottom holes.

 

Care to share what dealer has the $200 price? It's a pain trying to search each ones inventory

 

Speaking of tags, I've trimmed this Agency6 flip up mount to reduce stickout and added a backing plate, but I'm still not crazy about it. Any ideas to make it look a little less tacked on? Thinking of mounting the plate from the bottom, or flat on the bumper.

 

Sold my ATV yesterday gonna go buy new one today but won't bring in home till Tues or Wed via towing trailer.

 

I used my zip code and closest dealer to me and the price was 10% off- about $220. I used 92108 which is about 15 miles south of me and picked Toyota of El Cajon and the price was $201.xx

You might have to try a couple different zip codes and dealers in your area.

 

There is a lady who owns a nail salon next to my Barber. She has the most pristine 100 series in white. Every time I get a haircut I park next to it and think to myself, “if you only knew what she could do.” Maybe she takes the LC out on the weekends and says to herself while wheeling, “We know, we know.”

 

yeah but CA plates have 2 holes on the bottom too

 

Saw one of these anniversary models in person the other day, really a good looking truck.

 

Big Red got a Brazilian Butt Lift!
Custom fab tube rear bumper - 1.75” OD .120 wall DOM.

• Receiver Hitch relocation.
• 7” height increase on exit.
• Center of receiver is 24” from the ground. (Before was 17”)
• 7 welded attachment points with frame.
• Weight gain only about 25 lbs.

BEFORE and AFTER.

When wheeling the spare will be ratchet strapped to the floor. Exhaust is getting rerouted to side for high clearance.

 

or for when the top two get worn out you flip it over…double the service life!

 

Drove the SR5 to work this an. Filled er up with gas and just got home. I hate workin satiurdays.

 

I'm loving it. THANKS

Michigan has 4 holes also. Might figure a way to cap the bottom holes.

 

I wonder if the pop clips that holds the radiator cover plate down would fit those holes?

 

5 minutes ago

 

Where did you find these? I thought they stopped selling just the inserts.

Can you provide a link? Thanks!

 

Sweet! Welcome to the winch club!
Can’t welcome you to the bumper club as mine is still 2 weeks out.

 

Front driver's side:

• Blade: 85222-52180
• Rubber refill: ‎85214-06140

Front passenger side:

• Blade: 85212-53081
• Rubber refill: 85214-53090

Rear:

• Blade: 85242-35050
• Rubber refill: 85214-42040

 

Thanks! Winch was already there. I changed the color of the Toyota letters to FJ style

 

Started working on making a mounting plate today, first time doing something like this. I know the slits are sort of wonky but I don't own a lathe or mill. Once its all ready I will do a hammer paint job on it. The big box store only had diamond plate so that's what I will be using for this project. I will be mounting this in the space where some people mount the extra battery.

 

Picked them up today ... a little dusty but otherwise mint condition. $400 with the tpms and the lugnuts. Can anyone who has these let me know if the center caps are the same as the ones on the silver wheels or if they actually had different ones. I believe they are the same (shape is obviously but color is what I'm wondering) but would be nice to verify.

 

Brain fog, I'm unable to find a solution to mount my two traction boards here Rotopax and a shovel are on the other side
Help!

 

Put 'em where the spare tire used to be...

 

Want to keep the top clean

 

$28 BRIGECAN Traction Board MOUNTING KIT, Easy-to-Install Recovery Board Mount, Safety Traction Board Mount, Universal Recovery Board Mounting Kit with 4.72"~6.69" Hole Spacing

https://www.amazon.com/dp/B0CFM6X2Y2

im sure these would work

 

WOW... that's a steal!

 

Isn't the original spare tire location underneath at the back?

 

I did - I gave the ZIP codes of the two dealerships that usually have the best pricing in the country... Sometimes naming the dealership so that they can Google it and find it might lead them to change their incredible pricing. I used to promote a dealership out of New Mexico, but they got enough extra orders that they decided that it was too much hassle and they stopped participating in the program. I don't want to spoil it for the rest of the OEM loyalists. When you go to the main website, go to the item page and it will give you an option to look up dealerships. In my original post, I gave two zip codes of dealers that often have the best pricing available online. At N0rm Reeve$ Toyota in San Diego, they were $201 each. I believe that Str**t Toyota in Western Texas or Spr!ngh!ll in Mobile Alabama also had them at $200.

I, personally, order from out of state so that I can avoid sales tax. I don't know what the shipping turns out to be because the items are pretty heavy. You might need to make four separate orders in order to get the free shipping as I think the free shipping value is capped at $200 per order.

As a side note, I spent time researching what dealers have the better pricing, I suggest you do too. Pick a few ZIP codes across the country. You may discover a dealership that has even better pricing.

 

I got a set of used Sequoia 17x7.5 / +15mm offsets for my '23 Limited off FBM for $180. Have a new set of 265/70-17 ATs on the way. Plan is to get the Sequoia wheels powdercoated to match the redwood interior, and use the black center caps off the 20" Limited wheels. I test fitted them today, and they work perfectly on the Sequoia wheels. I found a slot in the cap, was able to pry it off using a long screwdriver, then popped it on the Sequoia wheel, and it fits just as tightly. I ordered new TPMS sensors, and will probably order black Toyota lug nuts for the 17s. You got a deal on those wheels, with the sensors and lug nuts, nice score!

 

I need two spares