1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Basket Type Roof Rack

Discussion in '5th Gen 4Runners (2010-2024)' started by Red Jed, Feb 13, 2024.

  1. Feb 13, 2024 at 6:40 PM
    #1
    Red Jed

    Red Jed [OP] New Member

    Joined:
    Aug 14, 2023
    Member:
    #34894
    Messages:
    26
    Gender:
    Male
    Vehicle:
    21 4Runner
    Can anyone tell me if there is a basket style roof rack that that is easy to install preferably right to the existing stock roof rack. Many seem really expensive I seen one on harbor freight $89 but think it’s probably very cheap. Thanks
     
    Thatbassguy likes this.
  2. Feb 13, 2024 at 6:44 PM
    #2
    CafeRacer87

    CafeRacer87 New Member

    Joined:
    Feb 5, 2024
    Member:
    #38334
    Messages:
    31
    Gender:
    Male
    I'm in the same boat, going on a camping trip and need a little bit more space but I dent need a full rack because it won't get used that often, there are the harbor friegh extendable style on Amazon I have been eye balling, one thing to note is the factory weight limit on the stock bars
     
    Thatbassguy likes this.
  3. Feb 13, 2024 at 6:48 PM
    #3
    2021venture

    2021venture New Member

    Joined:
    Jan 15, 2023
    Member:
    #30658
    Messages:
    841
    Gender:
    Male
    First Name:
    Todd
    Vehicle:
    2021 Venture
    Elka 2.5, Apache Offroad UCA, durobumps, RCI full skids, RSG sliders, 10 lb Powertank, Maxtrax, Hi lift jack, Westscott Designs modular roof rack and ladder, ARB rear diff breather relocate, ECGS bushing upgrade, c4 low profile bumper, Baja designs S8 lightbar, warn evo winch, factor 55 ultrahook, 80% off-road rear bumper, 4.56 regear
    Yakima megawarrior comes stock on the venture attaching to factory rails.
     
    Last edited: Feb 13, 2024
    Thatbassguy likes this.
  4. Feb 13, 2024 at 6:57 PM
    #4
    backpacker

    backpacker New Member

    Joined:
    Apr 22, 2023
    Member:
    #32515
    Messages:
    2,187
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    RSG sliders, Falken Wildpeak 265/70R/17 E
    Rolla goes easy onto the factory crossbars.
     
    2018 Limited and Thatbassguy like this.
  5. Feb 13, 2024 at 7:04 PM
    #5
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,638
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Texoma-Brad and djwantke like this.
  6. Feb 13, 2024 at 7:10 PM
    #6
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,476
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    This ^
     
  7. Feb 13, 2024 at 7:13 PM
    #7
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,476
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Thatbassguy likes this.
  8. Feb 13, 2024 at 7:15 PM
    #8
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,638
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
  9. Feb 13, 2024 at 9:13 PM
    #9
    Texoma-Brad

    Texoma-Brad OK Yota

    Joined:
    May 18, 2022
    Member:
    #27109
    Messages:
    302
    Gender:
    Male
    First Name:
    Brad
    Texoma USA
    Vehicle:
    2021 Venture, 2022 Limited 4WD, 1979 FJ40
    No disrespect to Harbor Freight - I have some of their stuff and in the right situation it's served its purpose and it's cheap. But I have to say, one of the last places I want something cheap is riding on top of my 4Runner carrying precious cargo blowing down the Interstate at 75mph. I have the Yakima Megawarrior and its carried so much stuff, so many times, that I've lost count. It was stock on my 21 Venture and attaches to the factory roof rails. If I hadn't gotten it stock I'd have bought one. We've had Yeti's stacked 2-high on it, day tent's, bicycles, gas cans, cargo cases, trunks, you name it. And amazingly it still looks like new after all that. I understand it's more expensive than some of the others mentioned, but it's worth it.
     
    Thatbassguy likes this.
  10. Feb 13, 2024 at 9:37 PM
    #10
    PVT Pablo

    PVT Pablo

    Joined:
    Mar 10, 2016
    Member:
    #1694
    Messages:
    2,359
    First Name:
    Paul
    Kitsap County, WA
    Vehicle:
    2016 4Runner TRD Pro
    Whatever basket style rack you go with, I highly recommend sealing the parts that join the rack together. Those points are moisture intrusion points and with the constant vibration are prone to rust.
     
    Toolguy73, djwantke and Thatbassguy like this.
  11. Feb 14, 2024 at 5:03 PM
    #11
    CafeRacer87

    CafeRacer87 New Member

    Joined:
    Feb 5, 2024
    Member:
    #38334
    Messages:
    31
    Gender:
    Male
    does anyone know what the factory cross bar weight limit is?
     
  12. Feb 14, 2024 at 5:13 PM
    #12
    2021venture

    2021venture New Member

    Joined:
    Jan 15, 2023
    Member:
    #30658
    Messages:
    841
    Gender:
    Male
    First Name:
    Todd
    Vehicle:
    2021 Venture
    Elka 2.5, Apache Offroad UCA, durobumps, RCI full skids, RSG sliders, 10 lb Powertank, Maxtrax, Hi lift jack, Westscott Designs modular roof rack and ladder, ARB rear diff breather relocate, ECGS bushing upgrade, c4 low profile bumper, Baja designs S8 lightbar, warn evo winch, factor 55 ultrahook, 80% off-road rear bumper, 4.56 regear
    Owners manual 2021 4Runner - Page 190 - "Do not exceed 120 lb. (54kg) cargo weight on the roof luggage carrier."
     
    djwantke likes this.
  13. Feb 15, 2024 at 4:20 AM
    #13
    2018 Limited

    2018 Limited New Member

    Joined:
    May 15, 2022
    Member:
    #27075
    Messages:
    519
    Gender:
    Male
    First Name:
    BDR
    Vehicle:
    2018 Limited
    I second the Rolla basket. I’ve had roof racks from them on other vehicles and still have a rear cargo carrier from them. They have the standard version which fits perfectly and sell an extension section should you need to go longer. I have a waterproof bag that fits it perfectly for luggage etc. Easy installation and a solid option for a reasonable price. Not the best photo but it’s all I had currently. If you need a better one and are interested let me know. I’ll snap a few pics.

    IMG_5621.jpg
     
  14. Feb 15, 2024 at 8:40 AM
    #14
    CafeRacer87

    CafeRacer87 New Member

    Joined:
    Feb 5, 2024
    Member:
    #38334
    Messages:
    31
    Gender:
    Male
    Is there any downside to connecting the basket to the actual rails instead of the crossbars to support more weight?
     
  15. Feb 15, 2024 at 8:52 AM
    #15
    2018 Limited

    2018 Limited New Member

    Joined:
    May 15, 2022
    Member:
    #27075
    Messages:
    519
    Gender:
    Male
    First Name:
    BDR
    Vehicle:
    2018 Limited
    I don’t think that’s the way it was designed if you are talking about the Rolla rack. The brackets have a cradle that wraps around the cross bars at 4 points.
     
  16. Feb 15, 2024 at 8:56 AM
    #16
    backpacker

    backpacker New Member

    Joined:
    Apr 22, 2023
    Member:
    #32515
    Messages:
    2,187
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    RSG sliders, Falken Wildpeak 265/70R/17 E
    These are good for mounting the Rola rack directly to the rails. https://www.4xinnovations.com/03-23-4Runner-Rola-Rack-Mount-Kit_p_43.html
    That gets the rack a tad lower than mounting to the crossbars, which IMO reduces wind noise a little and also makes it less taller.

    I weave bungee cords through the rack tubes to stop their singing on the road.
     
    2018 Limited likes this.
  17. Feb 15, 2024 at 9:07 AM
    #17
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,638
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    How much noise do they make? And, does it have a wind fairing?

    I had a MOAB basket when I first got mine, and without a fairing it sounded like I was driving around in a 1960's tornado movie.

    Now, I have the Yakima Megawarrior with the extension, and it only produces a low rumble, which is easy to ignore.
     
  18. Feb 15, 2024 at 9:09 AM
    #18
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,638
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    I'm not sure what basket you're referring to, but I love having my Megawarrior attached directly to the side-rails. Check the link in post #5 in this thread if you're interested.
     
  19. Feb 15, 2024 at 9:20 AM
    #19
    backpacker

    backpacker New Member

    Joined:
    Apr 22, 2023
    Member:
    #32515
    Messages:
    2,187
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    RSG sliders, Falken Wildpeak 265/70R/17 E
    It has a wind fairing, pretty much like the Yakima one. The noise the tubes make is speed-dependent. It's a low rumble around town, but harmonics come in at highway speed. The bungees push the resonant frequencies much higher and kill the sound altogether. I don't know if the Yakima tubes are stiffer or not, but they might be.
     
    Last edited: Feb 15, 2024
    Thatbassguy[QUOTED] likes this.
  20. Feb 15, 2024 at 8:47 PM
    #20
    CafeRacer87

    CafeRacer87 New Member

    Joined:
    Feb 5, 2024
    Member:
    #38334
    Messages:
    31
    Gender:
    Male
    This is perfect thank you, I'm about to order!
     

Products Discussed in

To Top