1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Feb 15, 2024 at 8:15 AM
    Dawglover08

    Dawglover08 New Member

    Joined:
    Apr 28, 2022
    Member:
    #26848
    Messages:
    54
    Gender:
    Male
    First Name:
    Jordan
    Atlanta
    Vehicle:
    2020 TRD ORP
    Black overlays. Black tailpipe.
    Let's say I don't feel like doing that... should the dealer know what I am asking? My fear is asking the question about lubricating the propeller shaft and the tech looking at me like he/she has no idea what I'm talking about.
     
  2. Feb 15, 2024 at 8:25 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,512
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    What's the cost for a 2nd fob, all in
    Anyone know?
    Thx dude
     
    BS67[QUOTED] likes this.
  3. Feb 15, 2024 at 8:47 AM
    backpacker

    backpacker New Member

    Joined:
    Apr 22, 2023
    Member:
    #32515
    Messages:
    2,187
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    RSG sliders, Falken Wildpeak 265/70R/17 E
    That shouldn't be a problem. And they're less likely to screw up a drive shaft lube than an oil change.
     
  4. Feb 15, 2024 at 8:50 AM
    yentup

    yentup New Member

    Joined:
    Sep 12, 2023
    Member:
    #35650
    Messages:
    6
    Gender:
    Male
    Arnold, MO
    Vehicle:
    2020 4Runner TRD Pro Army Green
    None yet
    I had to buy a 2nd fob and have it programmed. I bought my 2020 used and it only came with one. Was charged ~$450 for the fob and programming. If I wanted the additional emergency key included, it was another $125 for the key and to have it cut. No thanks!
     
    djwantke[QUOTED] likes this.
  5. Feb 15, 2024 at 8:54 AM
    BS67

    BS67 New Member

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    5,602
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    The dealer quoted me $300 for the fob/key with $16 cutting of the key.
     
    djwantke[QUOTED] likes this.
  6. Feb 15, 2024 at 8:56 AM
    BS67

    BS67 New Member

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    5,602
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    ...........since the dealer got me the fob and key they charged me $173 to cut the key and program the fob. Too much IMHO but if I lose a fob I'm not SOL since I have the 2nd fob available.
     
  7. Feb 15, 2024 at 8:58 AM
    Connor MacLeod

    Connor MacLeod New Member

    Joined:
    Nov 27, 2022
    Member:
    #29802
    Messages:
    134
    Gender:
    Male
    First Name:
    Connor
    Vehicle:
    2023 TRD Off Road
    I have seen a variety of experiences with this mentioned on forums. Some people say the dealership has no clue about this, some say it has been no problem, others have said the dealer claimed to do it but did not. For the avoidance of any doubt, I bought a grease gun and lock-n-lube and do the grease work myself, along with oil changes and anything else I can reasonably do myself to keep the dealership service department as far away from my 4Runner as possible.
     
  8. Feb 15, 2024 at 9:12 AM
    Connor MacLeod

    Connor MacLeod New Member

    Joined:
    Nov 27, 2022
    Member:
    #29802
    Messages:
    134
    Gender:
    Male
    First Name:
    Connor
    Vehicle:
    2023 TRD Off Road
    These dealer fobs/keys seem really expensive. I have seen local locksmiths advertise their fob and key services. Has anyone gotten a quote from an independent locksmith? Maybe that would be a more economical option?
     
    BS67[QUOTED] and Toolguy73 like this.
  9. Feb 15, 2024 at 9:19 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,512
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    $300 usd? :(
     
    BS67 likes this.
  10. Feb 15, 2024 at 9:26 AM
    TRDGrey2021

    TRDGrey2021 Guy in a truck

    Joined:
    Sep 1, 2023
    Member:
    #35400
    Messages:
    199
    Gender:
    Male
    Vehicle:
    2021 TRD Venture MGM
    Buncha Stuff
    Agreed...Dealership is useful to me for parts and only any warranty work if ever needed.
    I have very little trust in any of them for anything else.
     
    NEguy likes this.
  11. Feb 15, 2024 at 9:28 AM
    yentup

    yentup New Member

    Joined:
    Sep 12, 2023
    Member:
    #35650
    Messages:
    6
    Gender:
    Male
    Arnold, MO
    Vehicle:
    2020 4Runner TRD Pro Army Green
    None yet
    I looked at that but then heard that they can sell you the fob but can't program it and Toyota won't program what they don't sell. Check with your stealership first to see if they will program a fob they didn't provide.
     
  12. Feb 15, 2024 at 9:50 AM
    Linuxr

    Linuxr New Member

    Joined:
    Nov 2, 2018
    Member:
    #7650
    Messages:
    74
    VA
    In the shop getting the lift kit installed .
     
  13. Feb 15, 2024 at 10:14 AM
    raimieb

    raimieb Hobby Mechanic - Love Our 4Runner!

    Joined:
    May 16, 2022
    Member:
    #27095
    Messages:
    806
    Gender:
    Male
    First Name:
    raimie
    Vehicle:
    2021 ORP 4x4
    Lots…
    They will know what you mean.
     
  14. Feb 15, 2024 at 11:52 AM
    freak4life

    freak4life New Member

    Joined:
    Feb 22, 2020
    Member:
    #13248
    Messages:
    323
    Gender:
    Male
    First Name:
    Rich
    Cañon City Co
    Vehicle:
    2018 off-road
    Fuel Wheels, KO2 33’s RCI skids (alum. full length) Jomax ABS protection SSO low profile w/ Warn Zeon 10s Westcott: sliders, roof rack, ladder, Hitch mount rear tire carrier Nitro 4:88 regear LRA 24gal aux tank Icon he rear springs Treaty Oak spacers Viper security Upgraded stereo, speakers, 400 amp unit Goose gear 100% rear seat delete Dometic DZ95 RedArc man.30 2 Battleborn 100ah lithium Genesis Duel battery under hood ARB duel air under hood Baja 30’ amber and fog Rigid 40” light bar on roof, ditch lights Switch-pro
    Its proper name is “drive shaft” 4Runners do not have a propeller. Just a FYI.
     
  15. Feb 15, 2024 at 12:03 PM
    backpacker

    backpacker New Member

    Joined:
    Apr 22, 2023
    Member:
    #32515
    Messages:
    2,187
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    RSG sliders, Falken Wildpeak 265/70R/17 E
    djwantke likes this.
  16. Feb 15, 2024 at 12:22 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,512
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  17. Feb 15, 2024 at 1:33 PM
    kpmhspirit

    kpmhspirit New Member

    Joined:
    Dec 1, 2023
    Member:
    #37007
    Messages:
    65
    Gender:
    Male
    First Name:
    Pete
    North Illinois
    Vehicle:
    2023 40th Anniversary Special Edition
    Same here. Two fobs last November when I bought it so "issues" may be resolved:notsure:
     
  18. Feb 15, 2024 at 1:55 PM
    Gamecock4Runner

    Gamecock4Runner New Member

    Joined:
    Jan 24, 2024
    Member:
    #38105
    Messages:
    28
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    "Well...are you gonna do something? Or just stand there and bleed."
    3 inch RC lift kit, 17X9 RC 0 offset wheels, Faulkin Wilderpeak 285/70/17s, Tyger rack system, rear splash guard delete, TRD pro grill and more to come...
    Added two waterproof, dustproof storage bins from Harbor Freight, Apache brand. Bolted them from the inside to prevent theft. Also added grab handles on both sides from GPCA.
     
  19. Feb 15, 2024 at 2:01 PM
    Photon_Chaser

    Photon_Chaser 48171 and counting…

    Joined:
    Sep 4, 2023
    Member:
    #35473
    Messages:
    473
    Gender:
    Male
    First Name:
    Roger
    Sierra Nevada Mountains
    Vehicle:
    21 TRD Pro - "Photon"
    http://tinyurl.com/5th-Gen-Build-Page
    you didn’t get one as an add-on option?
    upload_2024-2-15_14-0-50.jpg

    Just kidding!
     
  20. Feb 15, 2024 at 2:02 PM
    EatSleepTacos

    EatSleepTacos New Member

    Joined:
    Jul 28, 2023
    Member:
    #34443
    Messages:
    45
    Gender:
    Male
    First Name:
    Randy
    West Valley, AZ
    Vehicle:
    2017 SR5
  21. Feb 15, 2024 at 2:04 PM
    Photon_Chaser

    Photon_Chaser 48171 and counting…

    Joined:
    Sep 4, 2023
    Member:
    #35473
    Messages:
    473
    Gender:
    Male
    First Name:
    Roger
    Sierra Nevada Mountains
    Vehicle:
    21 TRD Pro - "Photon"
    http://tinyurl.com/5th-Gen-Build-Page
    Replaced a defective Meso Customs Map Light kit. Meso is on top of things and sent out a replacement, got it in two days!
     
    TrailSpecial22 and playdixie like this.
  22. Feb 15, 2024 at 2:20 PM
    Lgarcia0822

    Lgarcia0822 New Member

    Joined:
    Oct 18, 2023
    Member:
    #36239
    Messages:
    13
    Gender:
    Male
    First Name:
    Luis
    Vehicle:
    2021 White SR5 Premium
    Maybe 60 pounds total. I can lift it by myself no problem
     
    Photon_Chaser[QUOTED] likes this.
  23. Feb 15, 2024 at 2:25 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,048
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    I know this is NOT the place, but can some one lead me to where I can post my ATV for sale on here?? I hate Craigslist waiting to have to use that as last resort. I posted on FB Market Place. I immediately got a $1500< lo ball offer! I hate selling stuff for this reason, BUT not willing to take such a hit on trade in when I don't need a new ATV I just WANT a new one.
     
  24. Feb 15, 2024 at 3:00 PM
    HuskyMike

    HuskyMike New Member

    Joined:
    Jan 23, 2023
    Member:
    #30835
    Messages:
    594
    San Diego
    Vehicle:
    2023 4Runner TRD Off Road Premium- Nautical Blue
    Here you go... Marketplace Other

    https://www.4runners.com/forums/marketplace-other.9/
     
    LCJ77[QUOTED] likes this.
  25. Feb 15, 2024 at 3:02 PM
    TacoGeeloor

    TacoGeeloor New Member

    Joined:
    Mar 16, 2023
    Member:
    #31809
    Messages:
    112
    Gender:
    Male
    First Name:
    Chad
    Vehicle:
    2023 Lunar Rock TRD Off Road Premium
    I see you’re from Olympia…where about is this location?
     
    Yotaholic[QUOTED] and djwantke like this.
  26. Feb 15, 2024 at 3:10 PM
    acet7

    acet7 New Member

    Joined:
    Feb 6, 2021
    Member:
    #19584
    Messages:
    80
    Gender:
    Male
    First Name:
    John
    Vehicle:
    2021 Dark Grey TRD Off-Road 4Runner
    Just got this delivered today, will be working this weekend on some onboard air.

    IMG_20240215_171137373.jpg
     
  27. Feb 15, 2024 at 3:38 PM
    Rob41

    Rob41 Veteran

    Joined:
    Jun 23, 2023
    Member:
    #33566
    Messages:
    946
    Gender:
    Male
    First Name:
    Rob
    Northern Michigan
    Vehicle:
    2023 Supercharged 4Runner TRD
    Magnuson Supercharger, CSF Performance Radiator, Eibach Pro-Truck Series 2R suspension, SCS Ray10 Bronze Wheels, Pedal Monster, TRD Pro Grill, TRD Pro Roof Rack
    ColeRunner, Yazzman, LCJ77 and 3 others like this.
  28. Feb 15, 2024 at 3:47 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,512
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    I think that's up in Canaidia :p
     
    Yotaholic likes this.
  29. Feb 15, 2024 at 3:53 PM
    TacoGeeloor

    TacoGeeloor New Member

    Joined:
    Mar 16, 2023
    Member:
    #31809
    Messages:
    112
    Gender:
    Male
    First Name:
    Chad
    Vehicle:
    2023 Lunar Rock TRD Off Road Premium
    Oh boy … probably too far for me at the moment then haha
     
  30. Feb 15, 2024 at 4:24 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,512
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Yotaholic and TacoGeeloor like this.

Products Discussed in

To Top