1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Mud flap recomendation

Discussion in '5th Gen 4Runners (2010-2024)' started by zzchipster, Jan 2, 2024.

  1. Jan 2, 2024 at 8:31 AM
    #1
    zzchipster

    zzchipster [OP] New Member

    Joined:
    Jan 29, 2015
    Member:
    #431
    Messages:
    11
    Gender:
    Male
    First Name:
    chip
    Vehicle:
    2024 4runner 4x4 4.0L ltd
    Brought home a new 2024 4runner limited on Dec 29th. This is my third and it did not come with the mudflaps. I was told the oem flaps don't fit, been told that several times. The mud flaps that come out of gulf states toyota are a propriety item. Any recommendations for after market mud flaps?

    Thanks
    Chip
     
  2. Jan 2, 2024 at 8:53 AM
    #2
    3JOH22A

    3JOH22A Toyota Gigolo

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,192
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    ^How much of the ugly side skirt and plastic cladding are you willing to remove?
     
    Last edited: Jan 2, 2024
  3. Jan 2, 2024 at 9:05 AM
    #3
    Slopemaster

    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    3,085
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    That’s a new one.
     
  4. Jan 2, 2024 at 9:14 AM
    #4
    zzchipster

    zzchipster [OP] New Member

    Joined:
    Jan 29, 2015
    Member:
    #431
    Messages:
    11
    Gender:
    Male
    First Name:
    chip
    Vehicle:
    2024 4runner 4x4 4.0L ltd
    Would like bolt on.
     
  5. Jan 2, 2024 at 9:17 AM
    #5
    catbrown357

    catbrown357 New Member

    Joined:
    Dec 19, 2023
    Member:
    #37386
    Messages:
    771
    Gender:
    Male
    Tempe
    Vehicle:
    2011 Limited 4WD
    4FED6BF4-A257-4373-9FD3-CDE1D73170E4.jpgThis is what I did to add mudflaps to my 2011 Limited. Not a very straight forward modification. Parts were sourced from a couple of different year 4Runners.4FED6BF4-A257-4373-9FD3-CDE1D73170E4.jpg
     
    roooo and zzchipster[OP] like this.
  6. Jan 2, 2024 at 9:18 AM
    #6
    zzchipster

    zzchipster [OP] New Member

    Joined:
    Jan 29, 2015
    Member:
    #431
    Messages:
    11
    Gender:
    Male
    First Name:
    chip
    Vehicle:
    2024 4runner 4x4 4.0L ltd
    My 2006 and 2016 4R Ltd came with flaps from gulf states toyota. This one I did not preference so I got what it had, no flaps.
     
  7. Jan 2, 2024 at 11:19 AM
    #7
    Trees91

    Trees91 New Member

    Joined:
    Jan 20, 2023
    Member:
    #30773
    Messages:
    244
    Gender:
    Male
    First Name:
    Forrest
    South Dakota
    Vehicle:
    2023 MGM SR5p
    1" cornfed level 255/75 yoko at trd replica wheels
  8. Jan 2, 2024 at 11:29 AM
    #8
    Slopemaster

    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    3,085
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    So the Limited trim doesn’t come from the factory with mud flaps?
     
  9. Jan 2, 2024 at 12:37 PM
    #9
    zzchipster

    zzchipster [OP] New Member

    Joined:
    Jan 29, 2015
    Member:
    #431
    Messages:
    11
    Gender:
    Male
    First Name:
    chip
    Vehicle:
    2024 4runner 4x4 4.0L ltd
    To get MF they have to be preferenced from Gulf States Toyoya, the importer. I usually do that, but this vehicle was already on the lot. Some come with MF and some don't. This one didn't. There is not a part number to order for the limited 4R. Seems
    Gulf States has a proprietary part. Don't know how that works if u wreck one.
     
    djwantke likes this.
  10. Jan 2, 2024 at 12:41 PM
    #10
    zzchipster

    zzchipster [OP] New Member

    Joined:
    Jan 29, 2015
    Member:
    #431
    Messages:
    11
    Gender:
    Male
    First Name:
    chip
    Vehicle:
    2024 4runner 4x4 4.0L ltd
    I contacted rokblokz today, didn't list 2024. Haven't heard back yet.

    Also Weathertech doesn't have cargo mat available yet. Just front and rear seats. They are probably waiting for verification.
     
  11. Jan 2, 2024 at 12:56 PM
    #11
    shooter1231

    shooter1231 New Member

    Joined:
    Feb 6, 2023
    Member:
    #31100
    Messages:
    214
    Gender:
    Male
    Vehicle:
    2023 Mag Gray 4Runner Limited
    Did something change between the 2023 Limited and 2024? My local Toyota dealer (not the dealer I bought the vehicle from) installed the Toyota Mudguards (PT769-89110) and the Nightshade version of the Limited running boards (PT925-89190) about a week, or two, after I bought the vehicle. I didn't watch them being installed so I don't know if they had to do anything special to install them on a Limited - but I recall dropping the 4Runnner off before work and they called me to pick it up before lunch - so installation of the mudguards and running boards must have been pretty easy. The OEM mudguards look like they fit very well on my 2023 Limited. I've been driving the vehicle with the mudguards on for almost exactly a year - no problems with the Toyota mudguards.
     
    djwantke likes this.
  12. Jan 2, 2024 at 1:08 PM
    #12
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,492
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Hey
    Making factory mudflaps work would be nice. But I found them ugly and insufficient. I did a mudflap delete, then replaced with aftermarket Husky Liners Kickback Mud Flaps. Custom install though, as in you mark existing fastener locations with clay, transfer marks to the flaps, drill and bolt on.
    Goodluck!

    FB_IMG_1676444311699.jpg
     
  13. Jan 2, 2024 at 11:32 PM
    #13
    roooo

    roooo New Member

    Joined:
    Nov 11, 2023
    Member:
    #36679
    Messages:
    207
    2018 Silver ORP KDSS
    you could say your car came... limited

    hahaha
     
    HuskerRunner and djwantke like this.
  14. Jan 2, 2024 at 11:46 PM
    #14
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,492
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
     
  15. Jan 2, 2024 at 11:58 PM
    #15
    zzchipster

    zzchipster [OP] New Member

    Joined:
    Jan 29, 2015
    Member:
    #431
    Messages:
    11
    Gender:
    Male
    First Name:
    chip
    Vehicle:
    2024 4runner 4x4 4.0L ltd
    Which do I drive today?

    20240101_120641.jpg
     
    Harringbr99 likes this.
  16. Jan 3, 2024 at 5:37 AM
    #16
    Curlystooge

    Curlystooge Member

    Joined:
    Feb 10, 2022
    Member:
    #25595
    Messages:
    202
    Gender:
    Male
    Vehicle:
    2022 limited in magnetic grey
    I would drive the white one, but that is just me.
     
  17. Jan 4, 2024 at 11:03 AM
    #17
    switchman2

    switchman2 New Member

    Joined:
    Oct 5, 2023
    Member:
    #36018
    Messages:
    21
    Gender:
    Male
    First Name:
    George
    Vehicle:
    2023 4Runner
    Added running board
    I installed this set, its for Limited. Got it from toyota dealer.

    Mudguards

    Part Number: PT769-89110

    1 $88.50
     
  18. Jan 4, 2024 at 1:15 PM
    #18
    zzchipster

    zzchipster [OP] New Member

    Joined:
    Jan 29, 2015
    Member:
    #431
    Messages:
    11
    Gender:
    Male
    First Name:
    chip
    Vehicle:
    2024 4runner 4x4 4.0L ltd
  19. Jan 6, 2024 at 10:19 AM
    #19
    bronzestar1

    bronzestar1 New Member

    Joined:
    Jan 5, 2024
    Member:
    #37732
    Messages:
    359
    Gender:
    Male
    Vehicle:
    2023 Limited magnetic gray with redwood interior
    275/55-20s, Airaid CAI, Summit muffler, oil catch can
    I have a '23 Limited, got these off Amazon. Rears went on without any issues, did have to drill the top hole on the fronts and use the supplied button-head screws. They're the perfect width for the 275/55s...

    Splash guards_20240101a.jpg Splash guards_20240101b.jpg
     
    Last edited: Jan 6, 2024
  20. Jan 6, 2024 at 4:40 PM
    #20
    zzchipster

    zzchipster [OP] New Member

    Joined:
    Jan 29, 2015
    Member:
    #431
    Messages:
    11
    Gender:
    Male
    First Name:
    chip
    Vehicle:
    2024 4runner 4x4 4.0L ltd
    Look good
     
  21. Jan 6, 2024 at 8:03 PM
    #21
    KENTUCKYRUNNER

    KENTUCKYRUNNER New Member

    Joined:
    Dec 9, 2021
    Member:
    #24588
    Messages:
    77
    Gender:
    Male
    Vehicle:
    2006 sport to a2016 SR5 PREMIUM TO A 22 LIMITED
    I had Toyota install mudguards on mine a week or two after i bought it because they were out of stock when i picked it up. They fit
     
  22. Jan 7, 2024 at 8:34 AM
    #22
    Spare Parts

    Spare Parts New Member

    Joined:
    May 13, 2020
    Member:
    #14274
    Messages:
    2,793
    Gender:
    Male
    Southern Maine
    Vehicle:
    22 LR ORP
    Sherpa Crestone. 4X Innovations Sliders
    the white one with mud flaps.
     

Products Discussed in

To Top