What have you done to your 5th Gen 4Runner today?

Still have a bunch of finishing to do (yes, those drawer fronts are hideous and will get replaced) but the seat delete is complete for a full length platform.

 

I tested it earlier and it works. I turned the lights on and the radio gave me the black screen, because it thought it was night time. Then I pointed a flash light at the sensor to simulate sunlight and it changed to a bright white screen.

It was a simple plug-n-play mode that took all of 2 minutes to install. The dummy sensor plug pops off kind of easy and the new one pops right in and...well, that's it.

 

Put your hand over it or have a friend do that. Your display and screen will adjust the brightness accordingly

 

One more question - when you turn on the headlights in daylight, will the screen stay light? If so, then I'm all in.

 

Yes. That is exactly what it does, and exactly why I bought it/installed it. My sensor works just like this guys sensor:

 

Geniuses

 

The 4R ALL AUTO windows feature is underrated and seldom mentioned eh, they didn't skimp on the legendary rear window too.
Am I alone really appreciating the fancy one touch ability? (regardless of its flaws) - for a guy used to zero power windows locks or doors on my only other two vehicles (don't laugh!)

 

tie down tow hook painted bronze

rear bumper bolt hole rust removed w/ por15 metal prep on a paint gun cleaner brush




rear bumper re-installed

 

I feel like you would have been done derusting the ride a while back if you took less pics.

Right there with you, it's great except for the six switches in three locations part.

 

Debaged and painted black the tailgate garnish. On the fence on buying a black one, so just did it myself before surrendering the $$$.

 

Spent yesterday I installed a carbon fiber steering wheel. Found mine on the KTJO4x4 website. It's already discounted $100. Then tacked on 15% more due being a first responder.

Not gonna lie, it scared the hell outta me taking that part of the truck apart due to the clock spring. But after watching crap ton of videos on doing this, gave it a shot, and I think it came out real well. The red stitching and handle compliment the black/red theme I have going.

 

That looks tight as hell!

 

Thanks! It is very intimidating to look at. As with any install, took my time. Getting the steering to unseat took a bit of "coaxing." Something I saw in a couple of vid was putting duct tape on the clock spring so it doesn't rotate any when putting the steering wheel back on. I did that. Once I got it seat back on, tightened them bolts back down, and rest you see.

 

A few more odds and ends to tie up but finished the base for the sleeping platform just in time for this weekend. Rain in the forecast but that's what car camping is for ‍

The base with the stickers will be a slide out on the left hand side under the platform for BRCC in the mornings and whiskey at night.

 

I installed the KTJO phone mount. I like that it just clips on and feels pretty secure, although I may not use it a lot, since most of my phone needs are addressed by either Bluetooth connection or Android Auto.

I also put beefier double-sided tape on these things, since their original tape wasn't holding well in the cooler fall weather.

$20 YOCTM For Toyota 4 runner Accessories Side Door Storage Tray Glove Organizer Fits 4-Runner 2010-2022 Door Pockets Storage Box Interior Parts

https://www.amazon.com/gp/product/B09DVTJVFV?ie=UTF8
I used the clear, thick Gorilla tape instead.

 

New tires and wheels mounted today. And added my chalk bag and front windows were tinted. Also added the Tyger side steps. Have canvasback covers on order. Possibly more to come!!

 

A little inside mods.

 

used the 4R to pick up a used FB MK office chair and computer desk for some working from home; inked a new Salary position today in the Audio Visual relm

 

Digging the carbon fiber

 

LED DRL conversion project last night!
Basically a visual or aesthetic upgrade that I wanted to do.
Used Diode Dynamics 9005 HP48 LED bulbs (about 210 lumens/bulb per the website) so as not to blind others.
Got a wiring T-Harness from FBC that is a PNP solution to get the correct wiring/voltage to the bulbs.
Super happy with the results and it looks OEM in my opinion!

 

Nice - do you have a link for the harness?

 

I know the gloss is unpopular, but for $20 on alibaba it covers the silver edges peeking through the matte panels on the sides and looks kinda nice. As long as no one touches it.

 

Sure thing, here you go:
https://fbchs.square.site/product/4...-harness/40?cp=true&sa=false&sbp=false&q=true

Let me know if you have any questions!

 

Just doing some truck stuff today with the pup. Picked up the last pieces to turn the interior silver (door handle supports) into gloss metallic black, just gotta install em!

 

Awesome dog and interior! Love the black shift knobs.
What’s that button just to the side of your seat heater dials?

 

Wowsers. Just looked at that site. Done a lot of electrical work and still highly confused about what each product does. Amazingly nice products, just need a simple sentence for each one to know what the result from install is.

 

Great ride! So the harness makes the drls a little bit less bright?

 

When I had a Gen 3 Tacoma, I bought a "delete in reverse" (DIR) from these guys. Did exactly as it was meant too.

 

Giving these a try instead of a top grill swap....

 

Thanks man. That's a switch I installed to control some grill lights I made. Although I don't really ever turn them on, it was a fun project at least. Made it out of some of those LED strip lights and some aluminum angle iron that I pie cut and bent to the shape of the grill. Never got a really good picture of them but here's a crappy one, lol: