1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

KDSS versus upgrading the suspension of a non-KDSS stock 4Runner? Who performs better on road?

Discussion in '5th Gen 4Runners (2010-2024)' started by nonkdss, Oct 9, 2023.

  1. Oct 9, 2023 at 9:48 PM
    #1
    nonkdss

    nonkdss [OP] New Member

    Joined:
    Sep 1, 2023
    Member:
    #35398
    Messages:
    3
    Which 4Runners would perform best on road out of the four in order? By 'best' I mean which would have the least body roll, better cornering, etc.
    1. KDSS 4Runner stock
    2. KDSS 4Runner with upgraded suspension (let's say Icon Stage 7)
    3. non-KDSS 4Runner stock
    4. non-KDSS 4Runner with upgraded suspension(let's say Icon Stage 7)

    I'm thinking the correct order might be 4, 1, 2/3? Is this the correct order? I'm thinking if you're spending $7000+ on a suspension, it should perform better on road than a $1700 option (KDSS)? Is this assumption correct? I placed 2/3 last as for 2. I believe KDSS with lift/upgraded suspension can cause issues to the KDSS system and 3. obviously would be the stock suspension performing the 'worst' out of the 4.

    I wish someone like Donut did a test comparing the 4.
     
  2. Oct 9, 2023 at 10:00 PM
    #2
    nova

    nova New Member

    Joined:
    Aug 26, 2022
    Member:
    #28359
    Messages:
    556
    Gender:
    Male
    First Name:
    mike
    Prescott Valley - Arizona
    Vehicle:
    slightly modified LE
    4.88, Air lockers, 35 Toyo MTs, C4 body armor, +2 LT, etc
    “On road suspension” isn’t in my vocabulary but I’d venture to guess, KDSS with upgraded shocks would be the best.

    Icon would not be an option, why the lift? It would kill on road performance and reservoirs won’t help at all. Maybe an OE Bilstein is more suitable.

    Just my .02

    Good Luck
    Mike
     
  3. Oct 9, 2023 at 10:03 PM
    #3
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,218
    Gender:
    Male
    Just curious why buy a 4Runner thinking about better cornering? Should a 4Runner be something comfy on road and especially on rough / gravel roads?

    I can only say the best handling would be KDSS with firm suspension (ex OME nitro sports from the ones I've tried) and the worst handling would be Non-KDSS with stock suspension.

    If you buy dual adjustable shocks you can dial in the way you want it to be.

    Edit-
    There are KDSS bypass units where you can free KDSS swaybar and let the suspension fully do its shock absorbing qualities when you need a comfy ride on gravel/ rough roads. No personal experience with this by pass units as my budd doesn't have on his KDSS 4Runner. Hopefully I will drive it on Saturday 21st and refresh my experience with it :):)
     
    Last edited: Oct 9, 2023
    2016Pro and broken-giver like this.
  4. Oct 9, 2023 at 10:30 PM
    #4
    JETSPD1477

    JETSPD1477 New

    Joined:
    Nov 30, 2022
    Member:
    #29859
    Messages:
    364
    SoCal
    Vehicle:
    Typical 4Runner
    if body lean/roll is the subject you’re keying on then the mechanical advantage of KDSS sway bars has to be accounted for. of course you can tune lean out with stiffer springs or firm shocks by which you then sacrifice other ride characteristics.
     
  5. Oct 9, 2023 at 11:03 PM
    #5
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,979
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    I’d say Limited.
     
    Duffer likes this.
  6. Oct 9, 2023 at 11:11 PM
    #6
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,490
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Good question for sure !

    I think you'd be surprised the answer may be KDSS equipped 4Runner, AND, a lift under 3" ie: upgraded suspension.
    I run Bilstein shocks all 4 corners, front OME lift springs, and rear ICON coils on my KDSS 2016 Trail
    + Dr. KDSS disengage module w/ dash switch, that's the kicker.

    Watching Thread
     
    OverRunner likes this.
  7. Oct 10, 2023 at 5:54 AM
    #7
    broken-giver

    broken-giver BFD

    Joined:
    Apr 14, 2023
    Member:
    #32346
    Messages:
    999
    Gender:
    Male
    I agree. 4runner feels super floaty when I am on lot of curvy roads. I have the non-KDSS and I feel every single turn, so does my dog in the trunk. I feel like i have to slow down so she doesn't feel queasy in the back (it could just be me though, dog didn't say that ;)).
    I plan to upgrade suspension in the future knowing fully well that its not for cornering -- just to have a more stiffer feel and reduce sway side to side, and nose dive.
    My other car, Y performance, is for cornering :cool: 4Runner is meant to go slow, and let everyone have a look at how beautiful it is.
     
    kmeeg[QUOTED] likes this.
  8. Oct 10, 2023 at 5:59 AM
    #8
    2016Pro

    2016Pro Why all of the Pro hate?

    Joined:
    Nov 11, 2018
    Member:
    #7739
    Messages:
    1,805
  9. Oct 10, 2023 at 7:42 AM
    #9
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,645
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    If your preference is the best cornering and stability, I'd go with KDSS and a good aftermarket suspension, with minimal lift if any. The reason I say this is that KDSS does nothing for the front end nosedive and mushiness of the stock shocks. It only improves lateral stability.

    Side note: I might avoid Icon due to a lot of leaking issues reported.

    2/3 might be a toss up between a stock OR with KDSS and a non KDSS 4runner with a good aftermarket suspension.

    And, last would be the stock, non KDSS option.

    Someone above mentioned the limited, which has XREAS. This is supposed to improve overall stability, but I've never experienced it firsthand. The downside with XREAS is that once the shocks go, you have a very expensive replacement, or you need to ditch the system.
     
  10. Oct 10, 2023 at 8:07 AM
    #10
    Schlappesepple

    Schlappesepple New Member

    Joined:
    May 1, 2021
    Member:
    #21226
    Messages:
    544
    Vehicle:
    2020 ORP
    Are you planning to off road (or drive on rough dirt roads)? If not, then don't buy a 4R.

    If you care about on road handling, specifically feeling stable / planted in turns, don't buy a 4R.

    Or, buy one anyways, be unhappy, spend an ass-load of money in "fixes", and come back many times over the coming years wondering where you went wrong.
     
  11. Oct 10, 2023 at 8:14 AM
    #11
    Rocko9999

    Rocko9999 New Member

    Joined:
    Apr 21, 2023
    Member:
    #32488
    Messages:
    1,178
    Vehicle:
    2011 Limited
    Non-KDDS. That system when it fails is very expensive and hard to fix if you can find a place to work on it.
     
  12. Oct 10, 2023 at 8:38 AM
    #12
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,218
    Gender:
    Male
    I could be wrong,

    • but IMO its not hard as per my local FB group I've seen couple of times KDSS cylinders replaced by the dealership relatively near me and owners are happy with the fix. I think its a dealership only repair as far as I've seen all KDSS repairs.
    • As for the cost it seem to be not bad as the cylinder (the one that looks like a shockabsober) seem to same price as set of coilovers, $1500.
     
    Thatbassguy likes this.
  13. Oct 10, 2023 at 8:57 AM
    #13
    2ndGen22re

    2ndGen22re Goldie, my 1st love & my new kid…

    Joined:
    Mar 10, 2022
    Member:
    #26045
    Messages:
    999
    Gender:
    Male
    First Name:
    CR
    Carson Valley, NV
    Vehicle:
    1990 22RE & 22 AG ORP KDSS
    One-at-this-price stripper. Bought new 34 yrs ago, a $13K leftover. Added Detroit TruTrac, 1”rear spring spacer and “pinstripes”… Factory AC kit and roof rack bought at dealer cost at time of purchase, still blows ice cold 32yrs later. 2022 AG ORP all stock.
    KDSS has been in Toyotas since 2004. Given nearly 20 years of production of millions of vehicles, failures are very rare.
     
    JETSPD1477 and Thatbassguy like this.
  14. Oct 10, 2023 at 9:22 AM
    #14
    LA260

    LA260 New Member

    Joined:
    May 28, 2020
    Member:
    #14602
    Messages:
    429
    Gender:
    Male
    KDSS + aftermarket suspension would be my vote, but it also depends what tires/size you have.
    The best on road handling I experienced was with KDSS/Dobinson's and 285/70 Cooper Evo MTs. #2 would be same suspension with stock Dunlop's, and #3 is what i have now, 285/70 BFG KO2s.
    On a side note I have the Dr KDSS switch and when I turn it on the light on the dash goes off but I haven't felt anything different yet...
     
    2ndGen22re and Thatbassguy like this.
  15. Oct 10, 2023 at 10:31 AM
    #15
    backpacker

    backpacker New Member

    Joined:
    Apr 22, 2023
    Member:
    #32515
    Messages:
    2,187
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    RSG sliders, Falken Wildpeak 265/70R/17 E
    So does a stiffer suspension actually change the speed you can safely corner, or does it merely disguise the fact that you're about to roll over?
     
  16. Oct 10, 2023 at 11:14 AM
    #16
    3JOH22A

    3JOH22A Toyota Gigolo

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,182
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    For on-road, the order would be 2-4-1-3. The reason being the 4Runner handles like a boat on stock suspension with a lot of brake dive and body roll compared to even other Toyota models like the 3rd gen Tacoma.

    KDSS is basically an automatic sway bar disconnect. One of the mounts on each sway bar is on a hydraulic piston instead of mounted on the frame. When front and rear axles are leaning in opposite directions (off-road articulation), the piston is free and the sway bar is effectively not there. When front and rear axles are leaning in the same direction (cornering), the piston stiffens up and the sway bar comes into effect. When the piston stiffens up, the KDSS sway bar has a higher stiffness than the non-KDSS model's sway bar, so the KDSS model has slightly less body roll in corners.
     
    gomiami, glwood54 and Old Tanker like this.
  17. Oct 10, 2023 at 11:16 AM
    #17
    3JOH22A

    3JOH22A Toyota Gigolo

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,182
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    When cornering on pavement, if you have stiff suspension, once you reach the limits of tire grip, the vehicle will slide outward, which is usually safer than leaning too far and rolling.
     
    Old Tanker likes this.
  18. Oct 10, 2023 at 11:23 AM
    #18
    nonkdss

    nonkdss [OP] New Member

    Joined:
    Sep 1, 2023
    Member:
    #35398
    Messages:
    3
    Good question.
     
  19. Oct 10, 2023 at 4:17 PM
    #19
    lowflyer

    lowflyer New Member

    Joined:
    Feb 17, 2021
    Member:
    #19819
    Messages:
    204
    Gender:
    Male
    Vehicle:
    2023 TRD ORP w/ KDSS <2021 Venture w/o KDSS <line of Tundras
    For 2.5 years I drove a Venture without KDSS. Now I have a TRD ORP with KDSS. It is a world of positive on-road and off-road improvement in pitch, sway, and roll. I should have bought a 4R with it 2.5 years ago. For me there is no need to lift or change shocks. So, your #1 is my #1.
     
    gomiami and 2ndGen22re like this.
  20. Dec 28, 2023 at 2:48 AM
    #20
    Yobruhitsme

    Yobruhitsme New Member

    Joined:
    Nov 17, 2023
    Member:
    #36773
    Messages:
    969
    Gender:
    Male
    Denver
    Vehicle:
    Ineos Grenadier
    Kdss makes a huge difference for on road drivability. Gives you better off road articulation as well. Only drawback is the additional $, for that option

    Kdss’ benefits are orthogonal to the benefits from after market lift kit.

    get both.
     
    gomiami, Old Tanker, glwood54 and 2 others like this.
  21. Dec 28, 2023 at 2:54 PM
    #21
    2ndGen22re

    2ndGen22re Goldie, my 1st love & my new kid…

    Joined:
    Mar 10, 2022
    Member:
    #26045
    Messages:
    999
    Gender:
    Male
    First Name:
    CR
    Carson Valley, NV
    Vehicle:
    1990 22RE & 22 AG ORP KDSS
    One-at-this-price stripper. Bought new 34 yrs ago, a $13K leftover. Added Detroit TruTrac, 1”rear spring spacer and “pinstripes”… Factory AC kit and roof rack bought at dealer cost at time of purchase, still blows ice cold 32yrs later. 2022 AG ORP all stock.
    Yes, the sway bar(s) are variable depending on speed. I’ve only had to get savage once to make an extremely important medical appointment for my wife 180miles away through the Sierras to the SF Bay Area . We were held up by road repairs multiple times in the mountains and my one hour cushion evaporated. I still had the Bridgestones on it and I tore up the edges, never felt like it would roll, it just stayed flat and we made the appointment.
     
  22. Dec 28, 2023 at 3:03 PM
    #22
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    2,947
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    THIS.

    If you don't need off-road performance, you're looking at the wrong vehicle.
     
    Slopemaster and Technologic80 like this.
  23. Dec 28, 2023 at 3:50 PM
    #23
    CalcityRenegade

    CalcityRenegade New Member

    Joined:
    Feb 14, 2023
    Member:
    #31252
    Messages:
    632
    First Name:
    Matt
    Calgary, Alberta, Canada, Earth
    Vehicle:
    2023 T4R ORP KDSS
    I'd venture a guess and say the latter.
     
  24. Dec 28, 2023 at 5:47 PM
    #24
    Schlappesepple

    Schlappesepple New Member

    Joined:
    May 1, 2021
    Member:
    #21226
    Messages:
    544
    Vehicle:
    2020 ORP
    A stiffer suspension will let you use more of the available grip of the tires, where a tippy, softer suspension might allow you to roll before reaching the tires' limit.

    With the stiffer suspension, it's possible to still roll over before losing tire grip. Whether you slide vs roll depends on center of gravity and the stickiness of the rubber.
     
    2ndGen22re likes this.
  25. Dec 28, 2023 at 8:53 PM
    #25
    DesertSurfer

    DesertSurfer New Member

    Joined:
    Jun 6, 2023
    Member:
    #33284
    Messages:
    1,533
    Gender:
    Male
    First Name:
    Gary
    San Diego
    Vehicle:
    2024 T4R ORP w/KDSS Underground
    Where I feel the KDSS the most on mine is going to Lake Havasu on the Freeway 10 east, getting nearly to Palm Springs and a vicious cross wind kicks in, watching semi-trucks changing lanes unintentionally sometimes tipping over. The old KDSS senses the body roll and compensates nearly immediately and my pucker factor goes from “oh shit” to turn up the radio Van Halen is on!
     
    2ndGen22re and Bald Michelins like this.
  26. Dec 28, 2023 at 9:21 PM
    #26
    3JOH22A

    3JOH22A Toyota Gigolo

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,182
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    Add deep-snow performance to the list. My 4Runner will probably live the rest of its useful life on pavement, but will need to climb over snow banks and charge through knee-deep unplowed streets on my way home from work.
     
    Trail Runnah[QUOTED] likes this.
  27. Jan 1, 2024 at 9:09 AM
    #27
    flight

    flight New Member

    Joined:
    Dec 23, 2023
    Member:
    #37451
    Messages:
    53
    The road manners between kdss and non is less noticable after a decent suspension setup. My suggestion always is to get a non kdss and put the money into the suspension

    I have icon stage 7 billet and kdss along with the dr kdss improvements though. Its a pita to deal with sometimes but handles great loaded up on the highway and off road
     
    Last edited: Jan 1, 2024
  28. Jan 1, 2024 at 9:40 AM
    #28
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    2,947
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    Fair point. My Volvo XC70 wagon was actually quite good at that task too.
     

Products Discussed in

To Top