1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Shifter upgrade Led headlight and fogs Vehicle Security Newish to the group Cleaning Inside Windshield Need a ball

400w plug can’t power espresso machine

Discussion in '5th Gen 4Runners (2010-2024)' started by mattrsupplyco, Sep 17, 2023.

Page 1 of 2
  1. Sep 17, 2023 at 3:44 AM
    #1
    mattrsupplyco

    #1
    mattrsupplyco [OP] New Member

    Joined:
    Aug 8, 2023
    Member:
    #34761
    Messages:
    60
    Gender:
    Male
    First Name:
    Matthew
    Vehicle:
    White 2023 TRD Pro
    I’m in the middle of a hurricane and need coffee. So I tried to run my espresso machine from the rear plug, it powers on and the grinder worked but as soon as I try to pull a shot it turns off

    the breville is rated 110-120

    any thoughts here?
    5BB0CA72-C83A-412E-9F16-8A97758C4C84.jpg
     
    mattrsupplyco, Sep 17, 2023
    #1
    icyhotahs likes this.
  2. Sep 17, 2023 at 4:08 AM
    #2
    BobbyB

    #2
    BobbyB Where the road ends, Fun begins!

    Joined:
    Nov 18, 2020
    Member:
    #17959
    Messages:
    320
    Gender:
    Male
    First Name:
    Bob
    Marietta, GA
    Vehicle:
    2021 White TRD Off Road
    SSO Slimline Bumper Warn Evo 10s winch Bilstein 5100 shocks Dobinson Springs (front and rear) JBA Upper Control Arms Baja Designs Squadron Pro Combo lights Diode Dynamics SS3 Pro Foglights RCI skids (engine, trans, Txfr and gas tank) CaliRaised sliders UpTop Overland Bravo Rack Auxbeam 6 switch panel Frac Harness with front camera Custom rear diff breather on firewall
    I have the same Breville Barista and just checked the owners manual. It is rated at 1,680 watts and the inverter in the T4R is rated at 400 watts. It’s cutting off because your Breville hot water heater and pump pull too much juice!

    Cheers,
    Bob
     
    BobbyB, Sep 17, 2023
    #2
    icebear, MooreKen, kolter45 and 5 others like this.
  3. Sep 17, 2023 at 4:13 AM
    #3
    mattrsupplyco

    #3
    mattrsupplyco [OP] New Member

    Joined:
    Aug 8, 2023
    Member:
    #34761
    Messages:
    60
    Gender:
    Male
    First Name:
    Matthew
    Vehicle:
    White 2023 TRD Pro
    RTFM! Lol thank you !
     
    mattrsupplyco, Sep 17, 2023
    #3
    Ironguy, Thatbassguy and MI-FL off roader like this.
  4. Sep 17, 2023 at 4:21 AM
    #4
    Curlystooge

    #4
    Curlystooge Member

    Joined:
    Feb 10, 2022
    Member:
    #25595
    Messages:
    197
    Gender:
    Male
    Vehicle:
    2022 limited in magnetic grey
    It will not power my single serve Keurig machine either. Shame a fella can’t make a cuppa joe off of the tailgate.
     
    Curlystooge, Sep 17, 2023
    #4
    Rocko9999, djwantke, Trail Runnah and 1 other person like this.
  5. Sep 17, 2023 at 4:38 AM
    #5
    MI-FL off roader

    #5
    MI-FL off roader T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,426
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    Yep, years ago I fooled myself in to thinking the same thing with a tiny 5 cup maker (800w on 120v/AC) from Wally's. No dice.
    I guess if you wire in a decent size inverter right to the battery, you could power a small 5 cup off the alternator. That or a $1,000 power station. I went with a stove top percolator from Bass Pro and a Coleman stove instead. Once its seasoned in a couple times, they make a great cup.
    Yes, Coffee IS that GD important!!
     
    MI-FL off roader, Sep 17, 2023
    #5
    Trail Runnah, Ironguy and mattrsupplyco[OP] like this.
  6. Sep 17, 2023 at 5:11 AM
    #6
    BobbyB

    #6
    BobbyB Where the road ends, Fun begins!

    Joined:
    Nov 18, 2020
    Member:
    #17959
    Messages:
    320
    Gender:
    Male
    First Name:
    Bob
    Marietta, GA
    Vehicle:
    2021 White TRD Off Road
    SSO Slimline Bumper Warn Evo 10s winch Bilstein 5100 shocks Dobinson Springs (front and rear) JBA Upper Control Arms Baja Designs Squadron Pro Combo lights Diode Dynamics SS3 Pro Foglights RCI skids (engine, trans, Txfr and gas tank) CaliRaised sliders UpTop Overland Bravo Rack Auxbeam 6 switch panel Frac Harness with front camera Custom rear diff breather on firewall
    When the power goes off at my house, my go-to setup for that critical cup of morning Joe is my backpacking stove and pour through brewer. Makes very good coffee!!!
     
    BobbyB, Sep 17, 2023
    #6
    MeefZah, backpacker, Ripper238 and 2 others like this.
  7. Sep 17, 2023 at 5:56 AM
    #7
    Charlievee

    #7
    Charlievee New Member

    Joined:
    Dec 20, 2018
    Member:
    #8149
    Messages:
    1,323
    Jetboil w/ French press. It's the one bit of gear that never leaves my ruck.
     
    Charlievee, Sep 17, 2023
    #7
    Ripper238, 5thToy, Ironguy and 1 other person like this.
  8. Sep 17, 2023 at 6:21 AM
    #8
    Northshore21

    #8
    Northshore21 New Member

    Joined:
    Feb 11, 2022
    Member:
    #25608
    Messages:
    17
    Gender:
    Male
    Vehicle:
    2014 4Runner Limited

    French press is the answer.
     
    Northshore21, Sep 17, 2023
    #8
    5thToy likes this.
  9. Sep 17, 2023 at 7:07 AM
    #9
    Mr. Snuffleupagus

    #9
    Mr. Snuffleupagus Light Runner

    Joined:
    Dec 6, 2021
    Member:
    #24531
    Messages:
    198
    Gender:
    Male
    First Name:
    Brandt
    Colorado
    Vehicle:
    2022 TRD Pro
    Elka 2.5 DC, Sherpa Crestone, C4 Lo Pro, Baja Designs S8, Morimoto 4bangers, Switch Pro 9100, Westcott Designs sliders, Toyo Open Country RT Trail 285 75/R17, Morimoto XB Evo
    Electric kettle and pour over for the win
     
    Mr. Snuffleupagus, Sep 17, 2023
    #9
    pastoreater, Doglover2003 and raimieb like this.
  10. Sep 17, 2023 at 7:33 AM
    #10
    TrueTexas

    #10
    TrueTexas New Member

    Joined:
    Jun 1, 2021
    Member:
    #21753
    Messages:
    402
    Gender:
    Male
    The Woodlands, TX
    Vehicle:
    2021 Magnetic Grey 4Runner TRD ORP
    Our go to is the aeropress during hurricanes/ extended power outages. Fortunately we have a gas stove to heat the water.

    If all else fails, the 6000 watt inverter generator that is setup to backfeed the house will get the job done.

    Sounds like neither of these answers help you get the cup of Joe you want today. Do you have a grill? If so, fire that thing up and boil some water, the pour it though the coffee maker.
     
    TrueTexas, Sep 17, 2023
    #10
  11. Sep 17, 2023 at 7:38 AM
    #11
    2ndGen22re

    #11
    2ndGen22re Goldie, my 1st love & my new kid…

    Joined:
    Mar 10, 2022
    Member:
    #26045
    Messages:
    997
    Gender:
    Male
    First Name:
    CR
    Carson Valley, NV
    Vehicle:
    1990 22RE & 22 AG ORP KDSS
    One-at-this-price stripper. Bought new 34 yrs ago, a $13K leftover. Added Detroit TruTrac, 1”rear spring spacer and “pinstripes”… Factory AC kit and roof rack bought at dealer cost at time of purchase, still blows ice cold 32yrs later. 2022 AG ORP all stock.
    Heating elements and motors(start-up) draw lots of current. For long outages we retreat to the RV which has only happened 2x in 7yrs.
     
    2ndGen22re, Sep 17, 2023
    #11
  12. Sep 17, 2023 at 7:46 AM
    #12
    Captain Spalding

    #12
    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    2,010
    I have a Cona vac pot that works with an alcohol burner but I wouldn’t bring it in the car. It only comes out for special occasions.
     
    Captain Spalding, Sep 17, 2023
    #12
  13. Sep 17, 2023 at 7:48 AM
    #13
    mattrsupplyco

    #13
    mattrsupplyco [OP] New Member

    Joined:
    Aug 8, 2023
    Member:
    #34761
    Messages:
    60
    Gender:
    Male
    First Name:
    Matthew
    Vehicle:
    White 2023 TRD Pro
    we have a propane stove so I sorted out a pour over situation!
     
    mattrsupplyco, Sep 17, 2023
    #13
    pastoreater, Spare Parts and TrueTexas[QUOTED] like this.
  14. Sep 17, 2023 at 8:04 AM
    #14
    bassist

    #14
    bassist New Member

    Joined:
    Aug 15, 2023
    Member:
    #34926
    Messages:
    910
    Gender:
    Male
    Vehicle:
    2023 TRD Offroad Premium
    The proper answer is Turkish coffee.



    Just keep your burner topped up with butane.
     
    bassist, Sep 17, 2023
    #14
    MeefZah likes this.
  15. Sep 17, 2023 at 8:07 AM
    #15
    Captain Spalding

    #15
    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    2,010
    Excellent..

    I live in an area with frequent power outages. I have a little 2000 watt generator. It’s not much but it’s quiet and I can pick it up myself. It’s enough to run the fridge and the TV. Or the coffee maker.

    [​IMG]
     
    Captain Spalding, Sep 17, 2023
    #15
    Munch826 likes this.
  16. Sep 17, 2023 at 9:24 AM
    #16
    whippersnapper02

    #16
    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,945
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    The plug is basically only good for Christmas lights or a phone charger.
     
    whippersnapper02, Sep 17, 2023
    #16
  17. Sep 17, 2023 at 9:57 AM
    #17
    BobbyB

    #17
    BobbyB Where the road ends, Fun begins!

    Joined:
    Nov 18, 2020
    Member:
    #17959
    Messages:
    320
    Gender:
    Male
    First Name:
    Bob
    Marietta, GA
    Vehicle:
    2021 White TRD Off Road
    SSO Slimline Bumper Warn Evo 10s winch Bilstein 5100 shocks Dobinson Springs (front and rear) JBA Upper Control Arms Baja Designs Squadron Pro Combo lights Diode Dynamics SS3 Pro Foglights RCI skids (engine, trans, Txfr and gas tank) CaliRaised sliders UpTop Overland Bravo Rack Auxbeam 6 switch panel Frac Harness with front camera Custom rear diff breather on firewall
    Glad to hear that you were able to get a cup of Joe after all. You said you were in a hurricane so hoping you, your family and property are all ok..

    Cheers,
    Bob
     
    BobbyB, Sep 17, 2023
    #17
    Captain Spalding and TrueTexas like this.
  18. Sep 17, 2023 at 10:01 AM
    #18
    joshdub

    #18
    joshdub New Member

    Joined:
    Aug 28, 2020
    Member:
    #16386
    Messages:
    441
    Vehicle:
    2020 TRD ORP
    It can run an iron for waxing snowboards as well
     
    joshdub, Sep 17, 2023
    #18
    djwantke likes this.
  19. Sep 17, 2023 at 9:46 PM
    #19
    McSpazatron

    #19
    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,408
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s

    Yup, of you look at almost any household appliance that specifically is used to heat (coffee makers, space space heaters, toasters), they are all limited about 1500watts maximum. Anything above that gets iffy even on household wiring. So it doesnt surprise me a 4runner with thin DC wiring can’t move that much current.
     
    McSpazatron, Sep 17, 2023
    #19
    Thatbassguy likes this.
  20. Sep 17, 2023 at 9:57 PM
    #20
    djwantke

    #20
    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,444
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Son of a b*tch eh!
    Good to know, proxy thru you, sorry bud
     
    djwantke, Sep 17, 2023
    #20
  21. Sep 17, 2023 at 10:09 PM
    #21
    djwantke

    #21
    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,444
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Alternatively, could rock an old school propane Escort camp stove that you have no idea the origins of. And of course the knobs melt off immediately from normal use causing you to burn ur finger to turn burner off hahah

    84045763_614.jpg
     
    djwantke, Sep 17, 2023
    #21
  22. Sep 18, 2023 at 12:10 AM
    #22
    Captain Spalding

    #22
    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    2,010
    My daughter appropriated our camp stove so I’ve just replaced ours, and the research is still fresh in my mind. We got the Camp Chef Everest 2x.

    The good:
    • 20,000 BTUs per burner
    • Boils a liter of water in 3½ minutes
    • Good flame adjustment, simmers well
    • Recessed knobs
    • Large enough to handle regular frying pans
    • Effective wind screen
    • Built like a tank

    Not so good:
    • Big and heavy
    • A little spendy
    • Sucks down the fuel if you’re not careful

    [​IMG]

    It pairs well with our well-used stainless percolator. :)
     
    Captain Spalding, Sep 18, 2023
    #22
  23. Sep 18, 2023 at 1:12 AM
    #23
    Slopemaster

    #23
    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    3,074
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    Starbucks.
     
    Slopemaster, Sep 18, 2023
    #23
    2ndGen22re likes this.
  24. Sep 18, 2023 at 5:19 AM
    #24
    mainerunr

    #24
    mainerunr New Member

    Joined:
    Oct 27, 2022
    Member:
    #29286
    Messages:
    398
    Gender:
    Male
    Maine
    Vehicle:
    '23 TRD ORP
    Toyo AT3's, Greenlane Sliders
    Doesn't look very hurricanish...

    We lost power for several hours due to the wind (saw basically no rain), ran a crockpot off a Bluetti 800W battery while the power was out. Backup was the 4runner. Small Crockpot draws 166W.
     
    mainerunr, Sep 18, 2023
    #24
  25. Sep 18, 2023 at 5:20 AM
    #25
    mattrsupplyco

    #25
    mattrsupplyco [OP] New Member

    Joined:
    Aug 8, 2023
    Member:
    #34761
    Messages:
    60
    Gender:
    Male
    First Name:
    Matthew
    Vehicle:
    White 2023 TRD Pro
    The power was out from the hurricane. This was post storm.
     
    mattrsupplyco, Sep 18, 2023
    #25
  26. Sep 18, 2023 at 6:21 AM
    #26
    bassist

    #26
    bassist New Member

    Joined:
    Aug 15, 2023
    Member:
    #34926
    Messages:
    910
    Gender:
    Male
    Vehicle:
    2023 TRD Offroad Premium
    It’s better than random gas station coffee, I guess.
     
    bassist, Sep 18, 2023
    #26
  27. Sep 18, 2023 at 7:57 AM
    #27
    UncleShorty

    #27
    UncleShorty New Member

    Joined:
    Jan 14, 2021
    Member:
    #19109
    Messages:
    283
    Your best bet would be to get a digital turboencabulator.

    That machine would solve your coffee making problem by providing plenty of reverse reactive power in the low magnetic flux domain...

    Perfect for use in a 4Runner...
     
    UncleShorty, Sep 18, 2023
    #27
    RumHamRunner73 and Captain Spalding like this.
  28. Sep 18, 2023 at 9:08 AM
    #28
    Curlystooge

    #28
    Curlystooge Member

    Joined:
    Feb 10, 2022
    Member:
    #25595
    Messages:
    197
    Gender:
    Male
    Vehicle:
    2022 limited in magnetic grey
    Since 1944.
     
    Curlystooge, Sep 18, 2023
    #28
  29. Sep 18, 2023 at 10:08 AM
    #29
    mainerunr

    #29
    mainerunr New Member

    Joined:
    Oct 27, 2022
    Member:
    #29286
    Messages:
    398
    Gender:
    Male
    Maine
    Vehicle:
    '23 TRD ORP
    Toyo AT3's, Greenlane Sliders
    Oh, I see, didn't realize that storm was still a hurricane when it hit Nova Scotia.
     
    mainerunr, Sep 18, 2023
    #29
  30. Sep 18, 2023 at 10:17 AM
    #30
    muddyix

    #30
    muddyix New Member

    Joined:
    May 17, 2022
    Member:
    #27104
    Messages:
    271
    Gender:
    Male
    AZ & TN
    Vehicle:
    '22 AG ORP
    coffee setup stays in the rig. Usually the MSI pocket burner for my gsi kettle and either the aeropress or a collapsible pour over. Comes in handy when doing frequent cross-country trips and always better than gas station/truck stop joe.
     
    muddyix, Sep 18, 2023
    #30
Page 1 of 2
Register FREE to Reply!
To Top